Buy from SKIL: SPT99-11
SKIL's own page for the SPT99-11. Not a paid link.
SKIL SPT99-11
The SKIL SPT99-11 is SKIL's 10 IN. Heavy Duty Worm Drive Table Saw With Stand; Skilsaw® Blade, listed with a 10 IN. blade and 15 Amp. Each figure below comes from SKIL's own pages, with a link to where it appears.
See it comparedWhat a jobsite table saw is for. On jobsite saws, WEN Products writes: "these are the smallest, usually least-expensive saws, and often have blade diameters of 8" to 8-1/2", though many 10" models exist."
As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.
Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.
SPT99-11 specifications published by SKIL (11)
- Current (amps)
- 15 Amp10 IN. Heavy Duty Worm Drive Table Saw With Stand; Skilsaw® Blade
- Blade diameter
- 10 IN.10 IN. Heavy Duty Worm Drive Table Saw With Stand; Skilsaw® Blade
- Rip capacity
- Right of Blade: 30-1/2 IN.; Left of Blade: 16-1/2 IN.10 IN. Heavy Duty Worm Drive Table Saw With Stand; Skilsaw® Blade
- Depth of cut
- 0° Bevel: 3-5/8 IN. (min. 92mm); 45° Bevel: 2-3/10 IN. (58 mm)10 IN. Heavy Duty Worm Drive Table Saw With Stand; Skilsaw® Blade
- Bevel capacity
- -1 to 47°10 IN. Heavy Duty Worm Drive Table Saw With Stand; Skilsaw® Blade
- Dust port
- compatible with any vacuum or vacuum accessory with a 2-1/4 inch outside diameterSKIL SPT99-11 owner's manual
- Included
- SPT99 10 IN. Heavy Duty Worm Drive Table Saw with Stand, 24-tooth SKILSAW® carbide tipped blade for rip cutting, Miter Gauge, Smart Guard System including Anti-Kick Back Device, Dust Elbow, Insert Plate, Push Stick, Wrench, Rip Fence10 IN. Heavy Duty Worm Drive Table Saw With Stand; Skilsaw® Blade
- Price on the maker's site
- $749.99 (skil.com, 28 Sep 2026)10 IN. Heavy Duty Worm Drive Table Saw With Stand; Skilsaw® Blade
As published by SKIL, read on 2026-09-28. Makers revise their tools; check SKIL's current specification and manual before you buy.
The SPT99-11 manual
SKIL publishes SKIL's owner's manual for the SPT99-11 (PDF) on its own site. Read it before you buy as well as after: it is where SKIL states the SPT99-11 requirements in full.
From the SPT99-11 manual and SKIL's product page (3)
- Max depth of cut
- Max. Cutting Depth - 0° Bevel (inch): 3-5/8 IN. (min. 92mm); Max. Cutting Depth - 45° Bevel (inch): 2-3/10 IN. (58 mm)10 IN. Heavy Duty Worm Drive Table Saw With Stand; Skilsaw® Blade
- Rip capacity
- Max. RIP of Left of Blade (inch): 16-1/2 IN.; Max. RIP of Right of Blade (inch): 30-1/2 IN.10 IN. Heavy Duty Worm Drive Table Saw With Stand; Skilsaw® Blade
- No-load speed
- 5000 rpm10 IN. Heavy Duty Worm Drive Table Saw With Stand; Skilsaw® Blade
SKIL's own wording, row by row, with a link to the page each was read from.
Before you buy the SPT99-11
- Dust port. SKIL lists compatible with any vacuum or vacuum accessory with a 2-1/4 inch outside diameter; that is the size your collector's hose or adapter has to meet.
Guides that cover jobsite table saws
- Cordless vs corded woodworking tools: the makers' figures side by side
- Jobsite, contractor, hybrid or cabinet table saw: what the makers' specs show
- Track saw vs table saw for sheet goods: cut depth, rail length and rip capacity
- Miter saw vs table saw: what each maker says the tool is for
- How many amps does a table saw draw? The makers' own figures
Questions that include the SPT99-11
Compare the SPT99-11 with
SPT99-11 vs DWE7491RS
The SPT99-11 beside the DEWALT DWE7491RS, row by row. The DWE7491RS and SPT99-11 are jobsite table saws people search for together, compared on their makers' published figures.
SPT99-11 vs C10RJS
The SPT99-11 beside the Metabo HPT C10RJS, row by row. Both are jobsite table saws with the same blade diameter: blade diameter 10" on the C10RJS, 10 IN. on the SPT99-11, in their makers' figures.
SPT99-11 vs C3610DRJQ4
The SPT99-11 beside the Metabo HPT C3610DRJQ4, row by row. Both are jobsite table saws with the same blade diameter: blade diameter 10-in x 5/8" on the C3610DRJQ4, 10 IN. on the SPT99-11, in their makers' figures.
You may also consider
Bosch GTS15-10
Bosch · jobsite table saw · blade diameter 10 in · current (amps) 15 · rip capacity Right: 32.125 in; Left: 14.125 in
SKIL TS6307-00
SKIL · jobsite table saw · blade diameter 10 IN. · current (amps) 15 Amps
FLEX FX7211-Z
FLEX · jobsite table saw · blade diameter 8-1/4 in · rip capacity 25 in
Other jobsite table saws
Bosch GTS18V-08N14
Bosch · jobsite table saw
DEWALT DWE7485
DEWALT · jobsite table saw · rip capacity 24.5-in Of rip capacity
DEWALT DWE7491RS
DEWALT · jobsite table saw · blade diameter 10" · rip capacity 32-1/2 in.
DEWALT DWE7491X
DEWALT · jobsite table saw · rip capacity 32-1/2-in Rip capacity
Bosch 4100XC-10
Bosch · jobsite table saw · blade diameter 10 in · current (amps) 15 · rip capacity Right: 30 in; Left: 8.5 in
FLEX FX7221-Z
FLEX · jobsite table saw · blade diameter 10 in · rip capacity 30.5 in
SPT99-11: questions answered from SKIL's specification
How many amps does the SKIL SPT99-11 draw?
The SKIL SPT99-11 draws 15 Amp, by SKIL's figure. Check the manual for the circuit SKIL requires.
Source: 10 IN. Heavy Duty Worm Drive Table Saw With Stand; Skilsaw® Blade
What blade size does the SKIL SPT99-11 take?
The SKIL SPT99-11 takes a 10 IN. blade, by SKIL's specification.
Source: 10 IN. Heavy Duty Worm Drive Table Saw With Stand; Skilsaw® Blade
What is the rip capacity of the SKIL SPT99-11?
SKIL lists rip capacity for the SPT99-11 as: Right of Blade: 30-1/2 IN.; Left of Blade: 16-1/2 IN.
Source: 10 IN. Heavy Duty Worm Drive Table Saw With Stand; Skilsaw® Blade
How deep does the SKIL SPT99-11 cut?
SKIL lists depth of cut for the SPT99-11 as: 0° Bevel: 3-5/8 IN. (min. 92mm); 45° Bevel: 2-3/10 IN. (58 mm).
Source: 10 IN. Heavy Duty Worm Drive Table Saw With Stand; Skilsaw® Blade
What size is the dust port on the SKIL SPT99-11?
SKIL lists dust port for the SPT99-11 as: compatible with any vacuum or vacuum accessory with a 2-1/4 inch outside diameter.
Source: SKIL SPT99-11 owner's manual
How much does the SKIL SPT99-11 weigh?
The SKIL SPT99-11 weighs 52.9 lbs., by SKIL's figure.
Source: 10 IN. Heavy Duty Worm Drive Table Saw With Stand; Skilsaw® Blade
What arbor size is the SKIL SPT99-11?
SKIL lists the arbor of the SPT99-11 as 5/8 IN.
Source: 10 IN. Heavy Duty Worm Drive Table Saw With Stand; Skilsaw® Blade
What comes with the SKIL SPT99-11?
SKIL lists included for the SPT99-11 as: SPT99 10 IN. Heavy Duty Worm Drive Table Saw with Stand, 24-tooth SKILSAW® carbide tipped blade for rip cutting, Miter Gauge, Smart Guard System including Anti-Kick Back Device, Dust Elbow, Insert Plate, Push Stick, Wrench, Rip Fence.
Source: 10 IN. Heavy Duty Worm Drive Table Saw With Stand; Skilsaw® Blade
What does the SPT99-11 cost on SKIL's site?
SKIL's own site showed $749.99 (skil.com, 28 Sep 2026) for the SPT99-11. That is the maker's price, not a retailer's or Amazon's; prices change, and the seller's page shows the current one.
Source: 10 IN. Heavy Duty Worm Drive Table Saw With Stand; Skilsaw® Blade
Where is the manual for the SKIL SPT99-11?
SKIL publishes the SPT99-11 manual on its own site; the link is under "The manual" on this page.
Source: SKIL SPT99-11 owner's manual
What does SKIL say about max depth of cut on the SPT99-11?
Per SKIL's own pages for the SPT99-11: Max. Cutting Depth - 0° Bevel (inch): 3-5/8 IN. (min. 92mm); Max. Cutting Depth - 45° Bevel (inch): 2-3/10 IN. (58 mm).
Source: 10 IN. Heavy Duty Worm Drive Table Saw With Stand; Skilsaw® Blade
What does SKIL say about rip capacity on the SPT99-11?
Per SKIL's own pages for the SPT99-11: Max. RIP of Left of Blade (inch): 16-1/2 IN.; Max. RIP of Right of Blade (inch): 30-1/2 IN.
Source: 10 IN. Heavy Duty Worm Drive Table Saw With Stand; Skilsaw® Blade
What does SKIL say about no-load speed on the SPT99-11?
Per SKIL's own pages for the SPT99-11: 5000 rpm.
Source: 10 IN. Heavy Duty Worm Drive Table Saw With Stand; Skilsaw® Blade