Skip to content
Menu

DEWALT DWE7491RS

The DEWALT DWE7491RS is DEWALT's 10-In. Jobsite Table Saw and Rolling Stand, listed with a 10" blade and a rip capacity of 32-1/2 in. Each figure below comes from DEWALT's own pages, with a link to where it appears.

See it compared

What a jobsite table saw is for. On jobsite saws, WEN Products writes: "these are the smallest, usually least-expensive saws, and often have blade diameters of 8" to 8-1/2", though many 10" models exist."

As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.

  • Available at Amazon: Amazon

    Amazon

    Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.

DWE7491RS specifications published by DEWALT (7)
Motor
15 amp10-In. Jobsite Table Saw and Rolling Stand | DEWALT®
Voltage
120V10-In. Jobsite Table Saw and Rolling Stand | DEWALT®
Blade diameter
10"10-In. Jobsite Table Saw and Rolling Stand | DEWALT®
Arbor
5/8" (16 mm)DEWALT DWE7491RS owner's manual
Rip capacity
32-1/2 in.10-In. Jobsite Table Saw and Rolling Stand | DEWALT®
Depth of cut
3-1/8 in.10-In. Jobsite Table Saw and Rolling Stand | DEWALT®
Speed
RPM, no load 4800DEWALT DWE7491RS owner's manual

As published by DEWALT, read on 2026-09-28. Makers revise their tools; check DEWALT's current specification and manual before you buy.

From the DWE7491RS manual and DEWALT's product page (3)
Dado blades
Do not stack dado blades thicker than 13/16" (20 mm); do not use dado blades larger than 8" (200 mm) diameterDEWALT DWE7491RS owner's manual
Dado blades
Special dado insert required (sold as an accessory)DEWALT DWE7491RS owner's manual
Dado blades
DWE7402DI Dado Throat Plate; DW7670 Stacked Dado Set (accessories)DEWALT DWE7491RS owner's manual

Each row is our short reading of a passage on DEWALT's pages, linked to where it appears.

What owners report about the DWE7491RS

A summary of 17 first-person reports from owners of the DEWALT DWE7491RS, counted at 2 places: Sawmill Creek (10, 2017–2025); Garage Journal (7, 2019–2026). Each theme below appears in at least 3 of the 17. This is what owners of the DWE7491RS wrote, not a finding of ours: Taikra has not used the tool.

  • Owners are split on: Rips hardwood adequately with a good blade, but slowly (4 of 17 reports)
  • Owners are split on: Owners build outfeed or infeed tables (3 of 17 reports)
  • Owners raise: Small table; owners add outfeed or infeed support (4 of 17 reports)

Before you buy the DWE7491RS

  • Power supply. DEWALT lists 120V for the DWE7491RS. DEWALT's manual gives the circuit to run it on.

Guides that cover jobsite table saws

Questions that include the DWE7491RS

Compare the DWE7491RS with

DWE7491RS vs 4100XC-10

The DWE7491RS beside the Bosch 4100XC-10, row by row. The 4100XC-10 and DWE7491RS are jobsite table saws people search for together, compared on their makers' published figures.

DWE7491RS vs GTS15-10

The DWE7491RS beside the Bosch GTS15-10, row by row. The GTS15-10 and DWE7491RS are jobsite table saws people search for together, compared on their makers' published figures.

DWE7491RS vs DWE7485

The DWE7491RS beside the DEWALT DWE7485, row by row. The DWE7485 and DWE7491RS are two jobsite table saws from one maker that people search for together, compared on the maker's published figures.

DWE7491RS vs DWE7491X

The DWE7491RS beside the DEWALT DWE7491X, row by row. The DWE7491RS and DWE7491X are two jobsite table saws from one maker that people search for together, compared on the maker's published figures.

DWE7491RS vs C10RJS

The DWE7491RS beside the Metabo HPT C10RJS, row by row. The DWE7491RS and C10RJS are jobsite table saws people search for together, compared on their makers' published figures.

DWE7491RS vs SPT99-11

The DWE7491RS beside the SKIL SPT99-11, row by row. The DWE7491RS and SPT99-11 are jobsite table saws people search for together, compared on their makers' published figures.

DWE7491RS vs TS6307-00

The DWE7491RS beside the SKIL TS6307-00, row by row. The DWE7491RS and TS6307-00 are jobsite table saws people search for together, compared on their makers' published figures.

You may also consider

Bosch GTS15-10

Bosch · jobsite table saw · blade diameter 10 in · current (amps) 15 · rip capacity Right: 32.125 in; Left: 14.125 in

DEWALT DWE7485

DEWALT · jobsite table saw · rip capacity 24.5-in Of rip capacity

Other jobsite table saws

DEWALT DWE7491X

DEWALT · jobsite table saw · rip capacity 32-1/2-in Rip capacity

FLEX FX7211-Z

FLEX · jobsite table saw · blade diameter 8-1/4 in · rip capacity 25 in

SKIL SPT99-11

SKIL · jobsite table saw · blade diameter 10 IN. · current (amps) 15 Amp

SKIL TS6307-00

SKIL · jobsite table saw · blade diameter 10 IN. · current (amps) 15 Amps

Bosch 4100XC-10

Bosch · jobsite table saw · blade diameter 10 in · current (amps) 15 · rip capacity Right: 30 in; Left: 8.5 in

DWE7491RS: questions answered from DEWALT's specification

What voltage does the DEWALT DWE7491RS run on?

DEWALT lists the DWE7491RS at 120V. Check the manual for the circuit DEWALT requires.

Source: 10-In. Jobsite Table Saw and Rolling Stand | DEWALT®

What blade size does the DEWALT DWE7491RS take?

The DEWALT DWE7491RS takes a 10" blade, by DEWALT's specification.

Source: 10-In. Jobsite Table Saw and Rolling Stand | DEWALT®

What is the rip capacity of the DEWALT DWE7491RS?

DEWALT lists the rip capacity of the DWE7491RS as 32-1/2 in.

Source: 10-In. Jobsite Table Saw and Rolling Stand | DEWALT®

How deep does the DEWALT DWE7491RS cut?

DEWALT lists the depth of cut of the DWE7491RS as 3-1/8 in.

Source: 10-In. Jobsite Table Saw and Rolling Stand | DEWALT®

What arbor size is the DEWALT DWE7491RS?

DEWALT lists the arbor of the DWE7491RS as 5/8" (16 mm).

Source: DEWALT DWE7491RS owner's manual

What does DEWALT say about dado blades on the DWE7491RS?

Per DEWALT's own pages for the DWE7491RS: Do not stack dado blades thicker than 13/16" (20 mm); do not use dado blades larger than 8" (200 mm) diameter. Special dado insert required (sold as an accessory). DWE7402DI Dado Throat Plate; DW7670 Stacked Dado Set (accessories).

Source: DEWALT DWE7491RS owner's manual

Every DEWALT tool on Taikra · All jobsite table saws compared

Sources

  1. 10-In. Jobsite Table Saw and Rolling Stand | DEWALT® — DEWALT
  2. DEWALT DWE7491RS owner's manual — DEWALT
  3. Owner reports: Sawmill Creek (thread 1 of 4) — Sawmill Creek
  4. Owner reports: Sawmill Creek (thread 2 of 4) — Sawmill Creek
  5. Owner reports: Sawmill Creek (thread 3 of 4) — Sawmill Creek
  6. Owner reports: Sawmill Creek (thread 4 of 4) — Sawmill Creek
  7. Owner reports: Garage Journal (thread 1 of 5) — Garage Journal
  8. Owner reports: Garage Journal (thread 2 of 5) — Garage Journal
  9. Owner reports: Garage Journal (thread 3 of 5) — Garage Journal
  10. Owner reports: Garage Journal (thread 4 of 5) — Garage Journal
  11. Owner reports: Garage Journal (thread 5 of 5) — Garage Journal