See it at DEWALT: DWE7491RS
DEWALT's own page for the DWE7491RS. Not a paid link.
DWE7491RS vs SPT99-11
DEWALT DWE7491RS vs SKIL SPT99-11. Of the 6 figures both makers publish, 1 differs: speed. 2 are worded too differently to set side by side: rip capacity and depth of cut. The DWE7491RS and SPT99-11 are jobsite table saws people search for together, compared on their makers' published figures.
The makers' figures side by side
| Specification | DEWALT DWE7491RS | SKIL SPT99-11 |
|---|---|---|
| Current (amps) | 15 amp | 15 Amp |
| Voltage | 120V | — |
| Blade diameter | 10" | 10 IN. |
| Arbor | 5/8" (16 mm) | 5/8 IN. |
| Rip capacity | 32-1/2 in. | Right of Blade: 30-1/2 IN.; Left of Blade: 16-1/2 IN. |
| Depth of cut | 3-1/8 in. | 0° Bevel: 3-5/8 IN. (min. 92mm); 45° Bevel: 2-3/10 IN. (58 mm) |
| Bevel capacity | — | -1 to 47° |
| Speed | RPM, no load 4800 | 5000 rpm |
| Dust port | — | compatible with any vacuum or vacuum accessory with a 2-1/4 inch outside diameter |
| Included | — | SPT99 10 IN. Heavy Duty Worm Drive Table Saw with Stand, 24-tooth SKILSAW® carbide tipped blade for rip cutting, Miter Gauge, Smart Guard System including Anti-Kick Back Device, Dust Elbow, Insert Plate, Push Stick, Wrench, Rip Fence |
| Weight | — | 52.9 lbs. |
| Price on the maker's site | — | $749.99 (skil.com, 28 Sep 2026) |
Every cell is the maker's own wording, cited on the DWE7491RS and SPT99-11 pages; the sources are listed at the end. The 6 dashes mark a figure the maker pages we cite do not give, not a zero.
Where to buy
DEWALT DWE7491RS
As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.
Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.
SKIL SPT99-11
Paid links · how this works
Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.
Buy from SKIL: SPT99-11
SKIL's own page for the SPT99-11. Not a paid link.
Where the DWE7491RS and SPT99-11 figures differ
- Speed: DWE7491RS: RPM, no load 4800. SPT99-11: 5000 rpm.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Rip capacity: DWE7491RS: 32-1/2 in. SPT99-11: Right of Blade: 30-1/2 IN.; Left of Blade: 16-1/2 IN.
- Depth of cut: DWE7491RS: 3-1/8 in. SPT99-11: 0° Bevel: 3-5/8 IN. (min. 92mm); 45° Bevel: 2-3/10 IN. (58 mm).
One-sided rows: only DEWALT's cited pages give voltage; only SKIL's cited pages give bevel capacity, dust port, included, weight and price on the maker's site. A missing figure is not a zero, so the DWE7491RS and SPT99-11 cannot be compared on those rows from these pages.
The DWE7491RS and the SPT99-11 in full
DEWALT DWE7491RS
DEWALT · jobsite table saw · blade diameter 10" · rip capacity 32-1/2 in.
SKIL SPT99-11
SKIL · jobsite table saw · blade diameter 10 IN. · current (amps) 15 Amp