Skip to content
Menu

FLEX FX7211-Z

The FLEX FX7211-Z is FLEX's 24V 8-1/4" Table Saw Tool Only, listed with a 8-1/4 in blade and a rip capacity of 25 in. Each figure below comes from FLEX's own pages, with a link to where it appears.

See it compared

What a jobsite table saw is for. On jobsite saws, WEN Products writes: "these are the smallest, usually least-expensive saws, and often have blade diameters of 8" to 8-1/2", though many 10" models exist."

As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.

  • Available at Amazon: Amazon

    Amazon

    Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.

FX7211-Z specifications published by FLEX (11)
Voltage
24V8-1/4" Table Saw Stacked Lithium Kit | FLEX (FX7211-1H)
Blade diameter
8-1/4 in8-1/4" Table Saw Stacked Lithium Kit | FLEX (FX7211-1H)
Arbor
5/8 in8-1/4" Table Saw Stacked Lithium Kit | FLEX (FX7211-1H)
Rip capacity
25 in8-1/4" Table Saw Stacked Lithium Kit | FLEX (FX7211-1H)
Depth of cut
2-5/8 in8-1/4" Table Saw Stacked Lithium Kit | FLEX (FX7211-1H)
Bevel capacity
-1° - 46°8-1/4" Table Saw Stacked Lithium Kit | FLEX (FX7211-1H)
Miter capacity
L45°~R45°8-1/4" Table Saw Stacked Lithium Kit | FLEX (FX7211-1H)
Table size
23 in8-1/4" Table Saw Stacked Lithium Kit | FLEX (FX7211-1H)
Speed
6,000 rpm8-1/4" Table Saw Stacked Lithium Kit | FLEX (FX7211-1H)
Dust port
2-1/2 in8-1/4" Table Saw Stacked Lithium Kit | FLEX (FX7211-1H)
Included
(1) 8-1/4'' Table Saw [FX7211], (1) Miter Gauge, (1) Push Stick, (1) Non-Thru Cut Riving Knife, (1) Modular Guard System, (1) Fence, (1) Anti-Kickback Pawls, (1) Blade Change Wrench8-1/4" Table Saw Stacked Lithium Kit | FLEX (FX7211-1H)

As published by FLEX, read on 2026-09-28. Makers revise their tools; check FLEX's current specification and manual before you buy.

From the FX7211-Z manual and FLEX's product page (3)
Dado blades
Max. Width Of Dado: 1/2 in8-1/4" Table Saw Stacked Lithium Kit | FLEX (FX7211-1H)
Rip capacity
25 in right; 12 in left8-1/4" Table Saw Stacked Lithium Kit | FLEX (FX7211-1H)
Max depth of cut
2-5/8 in at 0°; 1-7/8 in at 45°8-1/4" Table Saw Stacked Lithium Kit | FLEX (FX7211-1H)

Read on FLEX's own pages; each row links to where it is written.

Before you buy the FX7211-Z

  • Power supply. FLEX lists 24V for the FX7211-Z. The manual says what circuit the FX7211-Z needs.
  • Dust port. FLEX lists 2-1/2 in; that is the size your collector's hose or adapter has to meet.

Guides that cover jobsite table saws

Questions that include the FX7211-Z

Compare the FX7211-Z with

FX7211-Z vs 2736-20

The FX7211-Z beside the Milwaukee Tool 2736-20, row by row. Both are jobsite table saws with the same blade diameter: blade diameter 8-1/4 in on the FX7211-Z, 8-1/4" (210 mm) on the 2736-20, in their makers' figures.

FX7211-Z vs PBLTS01K

The FX7211-Z beside the RYOBI PBLTS01K, row by row. Both are jobsite table saws with the same blade diameter: blade diameter 8-1/4 in on the FX7211-Z, 8-1/4" on the PBLTS01K, in their makers' figures.

You may also consider

Bosch GTS15-10

Bosch · jobsite table saw · blade diameter 10 in · current (amps) 15 · rip capacity Right: 32.125 in; Left: 14.125 in

SKIL SPT99-11

SKIL · jobsite table saw · blade diameter 10 IN. · current (amps) 15 Amp

SKIL TS6307-00

SKIL · jobsite table saw · blade diameter 10 IN. · current (amps) 15 Amps

Other jobsite table saws

DEWALT DWE7485

DEWALT · jobsite table saw · rip capacity 24.5-in Of rip capacity

DEWALT DWE7491RS

DEWALT · jobsite table saw · blade diameter 10" · rip capacity 32-1/2 in.

DEWALT DWE7491X

DEWALT · jobsite table saw · rip capacity 32-1/2-in Rip capacity

RYOBI PBLTS01K

RYOBI · jobsite table saw · blade diameter 8-1/4" · rip capacity 12"

FX7211-Z: questions answered from FLEX's specification

What voltage does the FLEX FX7211-Z run on?

FLEX lists the FX7211-Z at 24V. Check the manual for the circuit FLEX requires.

Source: 8-1/4" Table Saw Stacked Lithium Kit | FLEX (FX7211-1H)

What blade size does the FLEX FX7211-Z take?

The FLEX FX7211-Z takes a 8-1/4 in blade, by FLEX's specification.

Source: 8-1/4" Table Saw Stacked Lithium Kit | FLEX (FX7211-1H)

What is the rip capacity of the FLEX FX7211-Z?

FLEX lists the rip capacity of the FX7211-Z as 25 in.

Source: 8-1/4" Table Saw Stacked Lithium Kit | FLEX (FX7211-1H)

How deep does the FLEX FX7211-Z cut?

FLEX lists the depth of cut of the FX7211-Z as 2-5/8 in.

Source: 8-1/4" Table Saw Stacked Lithium Kit | FLEX (FX7211-1H)

What size is the dust port on the FLEX FX7211-Z?

FLEX lists the dust port on the FX7211-Z as 2-1/2 in.

Source: 8-1/4" Table Saw Stacked Lithium Kit | FLEX (FX7211-1H)

What arbor size is the FLEX FX7211-Z?

FLEX lists the arbor of the FX7211-Z as 5/8 in.

Source: 8-1/4" Table Saw Stacked Lithium Kit | FLEX (FX7211-1H)

What comes with the FLEX FX7211-Z?

FLEX lists included for the FX7211-Z as: (1) 8-1/4'' Table Saw [FX7211], (1) Miter Gauge, (1) Push Stick, (1) Non-Thru Cut Riving Knife, (1) Modular Guard System, (1) Fence, (1) Anti-Kickback Pawls, (1) Blade Change Wrench.

Source: 8-1/4" Table Saw Stacked Lithium Kit | FLEX (FX7211-1H)

What does FLEX say about dado blades on the FX7211-Z?

Per FLEX's own pages for the FX7211-Z: Max. Width Of Dado: 1/2 in.

Source: 8-1/4" Table Saw Stacked Lithium Kit | FLEX (FX7211-1H)

What does FLEX say about rip capacity on the FX7211-Z?

Per FLEX's own pages for the FX7211-Z: 25 in right; 12 in left.

Source: 8-1/4" Table Saw Stacked Lithium Kit | FLEX (FX7211-1H)

What does FLEX say about max depth of cut on the FX7211-Z?

Per FLEX's own pages for the FX7211-Z: 2-5/8 in at 0°; 1-7/8 in at 45°.

Source: 8-1/4" Table Saw Stacked Lithium Kit | FLEX (FX7211-1H)

Every FLEX tool on Taikra · All jobsite table saws compared

Sources

  1. 8-1/4" Table Saw Stacked Lithium Kit | FLEX (FX7211-1H) — FLEX