See it at FLEX: FX7211-Z
FLEX's own page for the FX7211-Z. Not a paid link.
FX7211-Z vs 2736-20
FLEX FX7211-Z vs Milwaukee Tool 2736-20. Of the 8 figures both makers publish, 2 differ: voltage and depth of cut. 4 are worded too differently to set side by side: bevel capacity, miter capacity, dust port and included. Both are jobsite table saws with the same blade diameter: blade diameter 8-1/4 in on the FX7211-Z, 8-1/4" (210 mm) on the 2736-20, in their makers' figures.
The makers' figures side by side
| Specification | FLEX FX7211-Z | Milwaukee Tool 2736-20 |
|---|---|---|
| Voltage | 24V | 18V |
| Blade diameter | 8-1/4 in | 8-1/4" (210 mm) |
| Arbor | 5/8 in | 5/8" |
| Rip capacity | 25 in | — |
| Depth of cut | 2-5/8 in | 2-1/2" |
| Bevel capacity | -1° - 46° | 47 Degrees |
| Miter capacity | L45°~R45° | 60° Right or Left |
| Table size | 23 in | — |
| Speed | 6,000 rpm | — |
| Dust port | 2-1/2 in | dust chute connects to a vacuum hose (diameter 2.5"/62.6 mm) |
| Included | (1) 8-1/4'' Table Saw [FX7211], (1) Miter Gauge, (1) Push Stick, (1) Non-Thru Cut Riving Knife, (1) Modular Guard System, (1) Fence, (1) Anti-Kickback Pawls, (1) Blade Change Wrench | Anti Kick Back Pawls (tool-only listing: In The Box (1)) |
| Weight | — | 41.6 lb |
| Warranty | — | 5 Year Limited Warranty |
Each figure is the maker's own, as cited row by row on the FX7211-Z and 2736-20 pages and listed in the sources below. The 5 dashes mark a figure the maker pages we cite do not give, not a zero.
Where to buy
FLEX FX7211-Z
As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.
Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.
Milwaukee Tool 2736-20
See it at Milwaukee Tool: 2736-20
Milwaukee Tool's own page for the 2736-20. Not a paid link.
Where the FX7211-Z and 2736-20 figures differ
- Voltage: FX7211-Z: 24V. 2736-20: 18V.
- Depth of cut: FX7211-Z: 2-5/8 in. 2736-20: 2-1/2".
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Bevel capacity: FX7211-Z: -1° - 46°. 2736-20: 47 Degrees.
- Miter capacity: FX7211-Z: L45°~R45°. 2736-20: 60° Right or Left.
- Dust port: FX7211-Z: 2-1/2 in. 2736-20: dust chute connects to a vacuum hose (diameter 2.5"/62.6 mm).
- Included: FX7211-Z: (1) 8-1/4'' Table Saw [FX7211], (1) Miter Gauge, (1) Push Stick, (1) Non-Thru Cut Riving Knife, (1) Modular Guard System, (1) Fence, (1) Anti-Kickback Pawls, (1) Blade Change Wrench. 2736-20: Anti Kick Back Pawls (tool-only listing: In The Box (1)).
One-sided rows: only FLEX's cited pages give rip capacity, table size and speed; only Milwaukee Tool's cited pages give weight and warranty. A missing figure is not a zero, so the FX7211-Z and 2736-20 cannot be compared on those rows from these pages.
The FX7211-Z and the 2736-20 in full
FLEX FX7211-Z
FLEX · jobsite table saw · blade diameter 8-1/4 in · rip capacity 25 in
Milwaukee Tool 2736-20
Milwaukee Tool · jobsite table saw · blade diameter 8-1/4" (210 mm)
Every tool we list from FLEX and Milwaukee Tool.
Sources
- 8-1/4" Table Saw Stacked Lithium Kit | FLEX (FX7211-1H) — FLEX
- M18 FUEL 8-1/4" Table Saw w/ One-Key | Milwaukee Tool — Milwaukee Tool
- 2736-20 Operator's Manual (58-14-0089) — Milwaukee Tool
- Milwaukee Tool 2736-20 owner's manual — Milwaukee Tool