SKIL TS6307-00

The SKIL TS6307-00 is SKIL's 15 Amp 10 IN. Table Saw with Folding Stand, listed with a 10 IN. blade and 15 Amps. The figures below are SKIL's, each linked to the page it was read from.

See it compared

What a jobsite table saw is for. On jobsite saws, WEN Products writes: "these are the smallest, usually least-expensive saws, and often have blade diameters of 8" to 8-1/2", though many 10" models exist."

As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.

Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.

Buy from SKIL: TS6307-00

SKIL's own page for the TS6307-00. Not a paid link.

TS6307-00 specifications published by SKIL (12)

Current (amps): 15 Amps15 Amp 10 IN. Table Saw with Folding Stand | SKIL (TS6307-00)
Blade diameter: 10 IN.15 Amp 10 IN. Table Saw with Folding Stand | SKIL (TS6307-00)
Arbor: 5/8 IN.15 Amp 10 IN. Table Saw with Folding Stand | SKIL (TS6307-00)
Rip capacity: Right of Blade: 25.5 IN.; Left of Blade: 14 IN.15 Amp 10 IN. Table Saw with Folding Stand | SKIL (TS6307-00)
Depth of cut: 0° Bevel: 3.5 IN.; 45° Bevel: 2.5 IN.15 Amp 10 IN. Table Saw with Folding Stand | SKIL (TS6307-00)
Bevel capacity: -2°~47°15 Amp 10 IN. Table Saw with Folding Stand | SKIL (TS6307-00)
Table size: Table Width: 24 IN.; Table Length: 25 IN.15 Amp 10 IN. Table Saw with Folding Stand | SKIL (TS6307-00)
Table height: 32 IN.15 Amp 10 IN. Table Saw with Folding Stand | SKIL (TS6307-00)
Speed: 4600 RPM15 Amp 10 IN. Table Saw with Folding Stand | SKIL (TS6307-00)
Dust port: Attach a 2-1/2" vacuum hose into the dust portSKIL TS6307-00 owner's manual
Included: Table saw w/ integrated folding stand, blade guard, push stick, miter gauge, anti-kickback pawl, dust port elbow, 2pcs wrench, riving knife, rip fence, 24T blade, drive knob with washer and hex screw15 Amp 10 IN. Table Saw with Folding Stand | SKIL (TS6307-00)
Price on the maker's site: $329.99 (skil.com, 28 Sep 2026)15 Amp 10 IN. Table Saw with Folding Stand | SKIL (TS6307-00)

Read from SKIL's pages on 2026-09-28. A maker can change a figure at any time, so confirm the TS6307-00 against SKIL's current page before you buy.

The TS6307-00 manual

SKIL publishes SKIL's owner's manual for the TS6307-00 (PDF) on its own site. The manual is where SKIL states what the TS6307-00 needs and how it is set up; read it before you buy, not only after.

From the TS6307-00 manual and SKIL's product page (3)

Max depth of cut: Max. Cutting Depth - 0° Bevel: 3.5 IN.; Max. Cutting Depth - 45° Bevel: 2.5 IN.15 Amp 10 IN. Table Saw with Folding Stand | SKIL (TS6307-00)
Rip capacity: Max. RIP of Left of Blade: 14 IN.; Max. RIP of Right of Blade: 25.5 IN.15 Amp 10 IN. Table Saw with Folding Stand | SKIL (TS6307-00)
No-load speed: 4600 RPM15 Amp 10 IN. Table Saw with Folding Stand | SKIL (TS6307-00)

Read on SKIL's own pages; each row links to where it is written.

Before you buy the TS6307-00

Dust port. SKIL lists Attach a 2-1/2" vacuum hose into the dust port; check it against the hose on your extractor or collector.

Guides that cover jobsite table saws

Questions that include the TS6307-00

Compare the TS6307-00 with

TS6307-00 vs DWE7491RS

The TS6307-00 beside the DEWALT DWE7491RS, row by row. The DWE7491RS and TS6307-00 are jobsite table saws people search for together, compared on their makers' published figures.

TS6307-00 vs C10RJS

The TS6307-00 beside the Metabo HPT C10RJS, row by row. Both are jobsite table saws with the same blade diameter: blade diameter 10" on the C10RJS, 10 IN. on the TS6307-00, in their makers' figures.

TS6307-00 vs C3610DRJQ4

The TS6307-00 beside the Metabo HPT C3610DRJQ4, row by row. Both are jobsite table saws with the same blade diameter: blade diameter 10-in x 5/8" on the C3610DRJQ4, 10 IN. on the TS6307-00, in their makers' figures.

You may also consider

Bosch GTS15-10

Bosch · jobsite table saw · blade diameter 10 in · current (amps) 15 · rip capacity Right: 32.125 in; Left: 14.125 in

SKIL SPT99-11

SKIL · jobsite table saw · blade diameter 10 IN. · current (amps) 15 Amp

FLEX FX7211-Z

FLEX · jobsite table saw · blade diameter 8-1/4 in · rip capacity 25 in

Other jobsite table saws

Bosch GTS18V-08N14

Bosch · jobsite table saw

DEWALT DWE7485

DEWALT · jobsite table saw · rip capacity 24.5-in Of rip capacity

DEWALT DWE7491RS

DEWALT · jobsite table saw · blade diameter 10" · rip capacity 32-1/2 in.

DEWALT DWE7491X

DEWALT · jobsite table saw · rip capacity 32-1/2-in Rip capacity

Bosch 4100XC-10

Bosch · jobsite table saw · blade diameter 10 in · current (amps) 15 · rip capacity Right: 30 in; Left: 8.5 in

FLEX FX7221-Z

FLEX · jobsite table saw · blade diameter 10 in · rip capacity 30.5 in

TS6307-00: questions answered from SKIL's specification

How many amps does the SKIL TS6307-00 draw?

The SKIL TS6307-00 draws 15 Amps, by SKIL's figure. Check the manual for the circuit SKIL requires.

Source: 15 Amp 10 IN. Table Saw with Folding Stand | SKIL (TS6307-00)

What blade size does the SKIL TS6307-00 take?

The SKIL TS6307-00 takes a 10 IN. blade, by SKIL's specification.

Source: 15 Amp 10 IN. Table Saw with Folding Stand | SKIL (TS6307-00)

What is the rip capacity of the SKIL TS6307-00?

SKIL lists rip capacity for the TS6307-00 as: Right of Blade: 25.5 IN.; Left of Blade: 14 IN.

Source: 15 Amp 10 IN. Table Saw with Folding Stand | SKIL (TS6307-00)

How deep does the SKIL TS6307-00 cut?

SKIL lists depth of cut for the TS6307-00 as: 0° Bevel: 3.5 IN.; 45° Bevel: 2.5 IN.

Source: 15 Amp 10 IN. Table Saw with Folding Stand | SKIL (TS6307-00)

What size is the dust port on the SKIL TS6307-00?

SKIL lists the dust port on the TS6307-00 as Attach a 2-1/2" vacuum hose into the dust port.

Source: SKIL TS6307-00 owner's manual

What arbor size is the SKIL TS6307-00?

SKIL lists the arbor of the TS6307-00 as 5/8 IN.

Source: 15 Amp 10 IN. Table Saw with Folding Stand | SKIL (TS6307-00)

What comes with the SKIL TS6307-00?

SKIL lists included for the TS6307-00 as: Table saw w/ integrated folding stand, blade guard, push stick, miter gauge, anti-kickback pawl, dust port elbow, 2pcs wrench, riving knife, rip fence, 24T blade, drive knob with washer and hex screw.

Source: 15 Amp 10 IN. Table Saw with Folding Stand | SKIL (TS6307-00)

What does the TS6307-00 cost on SKIL's site?

SKIL's own site showed $329.99 (skil.com, 28 Sep 2026) for the TS6307-00. That is the maker's price, not a retailer's or Amazon's; prices change, and the seller's page shows the current one.

Source: 15 Amp 10 IN. Table Saw with Folding Stand | SKIL (TS6307-00)

Where is the manual for the SKIL TS6307-00?

SKIL publishes the TS6307-00 manual on its own site; the link is under "The manual" on this page.

Source: SKIL TS6307-00 owner's manual

What does SKIL say about max depth of cut on the TS6307-00?

Per SKIL's own pages for the TS6307-00: Max. Cutting Depth - 0° Bevel: 3.5 IN.; Max. Cutting Depth - 45° Bevel: 2.5 IN.

Source: 15 Amp 10 IN. Table Saw with Folding Stand | SKIL (TS6307-00)

What does SKIL say about rip capacity on the TS6307-00?

Per SKIL's own pages for the TS6307-00: Max. RIP of Left of Blade: 14 IN.; Max. RIP of Right of Blade: 25.5 IN.

Source: 15 Amp 10 IN. Table Saw with Folding Stand | SKIL (TS6307-00)

What does SKIL say about no-load speed on the TS6307-00?

Per SKIL's own pages for the TS6307-00: 4600 RPM.

Source: 15 Amp 10 IN. Table Saw with Folding Stand | SKIL (TS6307-00)

Every SKIL tool on Taikra · All jobsite table saws compared

Sources

15 Amp 10 IN. Table Saw with Folding Stand | SKIL (TS6307-00) — SKIL
SKIL TS6307-00 owner's manual — SKIL