See it at DEWALT: DWE7491RS
DEWALT's own page for the DWE7491RS. Not a paid link.
DWE7491RS vs TS6307-00
DEWALT DWE7491RS vs SKIL TS6307-00. Of the 6 figures both makers publish, 1 differs: speed. 2 are worded too differently to set side by side: rip capacity and depth of cut. The DWE7491RS and TS6307-00 are jobsite table saws people search for together, compared on their makers' published figures.
The makers' figures side by side
| Specification | DEWALT DWE7491RS | SKIL TS6307-00 |
|---|---|---|
| Current (amps) | 15 amp | 15 Amps |
| Voltage | 120V | — |
| Blade diameter | 10" | 10 IN. |
| Arbor | 5/8" (16 mm) | 5/8 IN. |
| Rip capacity | 32-1/2 in. | Right of Blade: 25.5 IN.; Left of Blade: 14 IN. |
| Depth of cut | 3-1/8 in. | 0° Bevel: 3.5 IN.; 45° Bevel: 2.5 IN. |
| Bevel capacity | — | -2°~47° |
| Table size | — | Table Width: 24 IN.; Table Length: 25 IN. |
| Table height | — | 32 IN. |
| Speed | RPM, no load 4800 | 4600 RPM |
| Dust port | — | Attach a 2-1/2" vacuum hose into the dust port |
| Included | — | Table saw w/ integrated folding stand, blade guard, push stick, miter gauge, anti-kickback pawl, dust port elbow, 2pcs wrench, riving knife, rip fence, 24T blade, drive knob with washer and hex screw |
| Price on the maker's site | — | $329.99 (skil.com, 28 Sep 2026) |
Every cell is the maker's own wording, cited on the DWE7491RS and TS6307-00 pages; the sources are listed at the end. 7 cells show a dash: the maker pages we cite do not state that figure.
Where to buy
DEWALT DWE7491RS
As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.
Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.
SKIL TS6307-00
Paid links · how this works
Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.
Buy from SKIL: TS6307-00
SKIL's own page for the TS6307-00. Not a paid link.
Where the DWE7491RS and TS6307-00 figures differ
- Speed: DWE7491RS: RPM, no load 4800. TS6307-00: 4600 RPM.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Rip capacity: DWE7491RS: 32-1/2 in. TS6307-00: Right of Blade: 25.5 IN.; Left of Blade: 14 IN.
- Depth of cut: DWE7491RS: 3-1/8 in. TS6307-00: 0° Bevel: 3.5 IN.; 45° Bevel: 2.5 IN.
Figures cited for one of the two: only DEWALT's cited pages give voltage; only SKIL's cited pages give bevel capacity, table size, table height, dust port, included and price on the maker's site. Ask the other maker before treating the DWE7491RS and TS6307-00 as equal on those points.
The DWE7491RS and the TS6307-00 in full
DEWALT DWE7491RS
DEWALT · jobsite table saw · blade diameter 10" · rip capacity 32-1/2 in.
SKIL TS6307-00
SKIL · jobsite table saw · blade diameter 10 IN. · current (amps) 15 Amps