FX7221-Z vs 4100XC-10
The FX7221-Z beside the Bosch 4100XC-10, row by row. Both are jobsite table saws with the same blade diameter, 10 in in both makers' figures.
FLEX FX7221-Z
The FLEX FX7221-Z is FLEX's 24V 10" Table Saw Tool Only, listed with a 10 in blade and a rip capacity of 30.5 in. FLEX published every figure here; each one links to its source.
See it at FLEXWhat a jobsite table saw is for. On jobsite saws, WEN Products writes: "these are the smallest, usually least-expensive saws, and often have blade diameters of 8" to 8-1/2", though many 10" models exist."
FX7221-Z specifications published by FLEX (13)
- Motor
- Brushless10" Table Saw Stacked Lithium Kit | FLEX (FX7221)
- Blade diameter
- 10 in10" Table Saw Stacked Lithium Kit | FLEX (FX7221)
- Rip capacity
- 30.5 in10" Table Saw Stacked Lithium Kit | FLEX (FX7221)
- Depth of cut
- 3-5/8 in10" Table Saw Stacked Lithium Kit | FLEX (FX7221)
- Bevel capacity
- -1° ~ 47°10" Table Saw Stacked Lithium Kit | FLEX (FX7221)
- Miter capacity
- L45° ~ R45°10" Table Saw Stacked Lithium Kit | FLEX (FX7221)
- Table size
- 27.5 in10" Table Saw Stacked Lithium Kit | FLEX (FX7221)
- Fence
- Rack And Pinion: Yes10" Table Saw Stacked Lithium Kit | FLEX (FX7221)
- Speed
- 5,000 RPM10" Table Saw Stacked Lithium Kit | FLEX (FX7221)
- Included
- (1) 10'' Table Saw [FX7221], (1) Miter Gauge, (1) Push Stick, (1) Non-thru cut riving Knife, (1) Modular Guard System, (1) Fence, (1) Anti-Kickback Pawls, (1) Blade Change Wrench, (1) Dust Tube10" Table Saw Stacked Lithium Kit | FLEX (FX7221)
- Weight
- 50.7 lbs10" Table Saw Stacked Lithium Kit | FLEX (FX7221)
Every row is FLEX's own wording, read on 2026-09-28. Check the current FX7221-Z specification on FLEX's site before buying; makers revise their tools.
From the FX7221-Z manual and FLEX's product page (5)
- Dado blades
- Max. Width Of Dado: 13/16 in10" Table Saw Stacked Lithium Kit | FLEX (FX7221)
- Rip capacity
- 30.5 in right; 16.5 in left10" Table Saw Stacked Lithium Kit | FLEX (FX7221)
- Max depth of cut
- 3-5/8 in at 0°; 2-1/4 in at 45°10" Table Saw Stacked Lithium Kit | FLEX (FX7221)
- Weight
- 50.7 lbs10" Table Saw Stacked Lithium Kit | FLEX (FX7221)
- No load speed
- 5,000 RPM10" Table Saw Stacked Lithium Kit | FLEX (FX7221)
Read on FLEX's own pages; each row links to where it is written.
Before you buy the FX7221-Z
- Power supply. FLEX lists 24V for the FX7221-Z. FLEX's manual gives the circuit to run it on.
Guides that cover jobsite table saws
- Cordless vs corded woodworking tools: the makers' figures side by side
- Jobsite, contractor, hybrid or cabinet table saw: what the makers' specs show
- Track saw vs table saw for sheet goods: cut depth, rail length and rip capacity
- Miter saw vs table saw: what each maker says the tool is for
- How many amps does a table saw draw? The makers' own figures
Questions that include the FX7221-Z
Compare the FX7221-Z with
FX7221-Z vs GTS15-10
The FX7221-Z beside the Bosch GTS15-10, row by row. Both are jobsite table saws with the same blade diameter, 10 in in both makers' figures.
FX7221-Z vs 2705
The FX7221-Z beside the Makita U.S.A. 2705, row by row. Both are jobsite table saws with the same blade diameter: blade diameter 10 in on the FX7221-Z, 10" on the 2705, in their makers' figures.
You may also consider
Bosch GTS15-10
Bosch · jobsite table saw · blade diameter 10 in · current (amps) 15 · rip capacity Right: 32.125 in; Left: 14.125 in
SKIL SPT99-11
SKIL · jobsite table saw · blade diameter 10 IN. · current (amps) 15 Amp
SKIL TS6307-00
SKIL · jobsite table saw · blade diameter 10 IN. · current (amps) 15 Amps
Other jobsite table saws
FLEX FX7211-Z
FLEX · jobsite table saw · blade diameter 8-1/4 in · rip capacity 25 in
Bosch GTS18V-08N14
Bosch · jobsite table saw
DEWALT DWE7485
DEWALT · jobsite table saw · rip capacity 24.5-in Of rip capacity
DEWALT DWE7491RS
DEWALT · jobsite table saw · blade diameter 10" · rip capacity 32-1/2 in.
DEWALT DWE7491X
DEWALT · jobsite table saw · rip capacity 32-1/2-in Rip capacity
Bosch 4100XC-10
Bosch · jobsite table saw · blade diameter 10 in · current (amps) 15 · rip capacity Right: 30 in; Left: 8.5 in
FX7221-Z: questions answered from FLEX's specification
What voltage does the FLEX FX7221-Z run on?
FLEX lists the FX7221-Z at 24V. The manual states the circuit it needs.
What blade size does the FLEX FX7221-Z take?
The FLEX FX7221-Z takes a 10 in blade, by FLEX's specification.
What is the rip capacity of the FLEX FX7221-Z?
FLEX lists the rip capacity of the FX7221-Z as 30.5 in.
How deep does the FLEX FX7221-Z cut?
FLEX lists the depth of cut of the FX7221-Z as 3-5/8 in.
How much does the FLEX FX7221-Z weigh?
The FLEX FX7221-Z weighs 50.7 lbs, by FLEX's figure.
What arbor size is the FLEX FX7221-Z?
FLEX lists the arbor of the FX7221-Z as 5/8 in.
What comes with the FLEX FX7221-Z?
FLEX lists included for the FX7221-Z as: (1) 10'' Table Saw [FX7221], (1) Miter Gauge, (1) Push Stick, (1) Non-thru cut riving Knife, (1) Modular Guard System, (1) Fence, (1) Anti-Kickback Pawls, (1) Blade Change Wrench, (1) Dust Tube.
What does FLEX say about dado blades on the FX7221-Z?
Per FLEX's own pages for the FX7221-Z: Max. Width Of Dado: 13/16 in.
What does FLEX say about rip capacity on the FX7221-Z?
Per FLEX's own pages for the FX7221-Z: 30.5 in right; 16.5 in left.
What does FLEX say about max depth of cut on the FX7221-Z?
Per FLEX's own pages for the FX7221-Z: 3-5/8 in at 0°; 2-1/4 in at 45°.
What does FLEX say about weight on the FX7221-Z?
Per FLEX's own pages for the FX7221-Z: 50.7 lbs.
What does FLEX say about no load speed on the FX7221-Z?
Per FLEX's own pages for the FX7221-Z: 5,000 RPM.