See it at FLEX: FX7221-Z
FLEX's own page for the FX7221-Z. Not a paid link.
FX7221-Z vs 2705
FLEX FX7221-Z vs Makita U.S.A. 2705. Of the 6 figures both makers publish, 2 differ: voltage and weight. 2 are worded too differently to set side by side: depth of cut and table size. Both are jobsite table saws with the same blade diameter: blade diameter 10 in on the FX7221-Z, 10" on the 2705, in their makers' figures.
The makers' figures side by side
| Specification | FLEX FX7221-Z | Makita U.S.A. 2705 |
|---|---|---|
| Motor | Brushless | — |
| Current (amps) | — | 15.0 |
| Voltage | 24V | 120V |
| Blade diameter | 10 in | 10" |
| Arbor | 5/8 in | 5/8" |
| Rip capacity | 30.5 in | — |
| Depth of cut | 3-5/8 in | at 90° 3-5/8"; at 45° 2-1/2" |
| Bevel capacity | -1° ~ 47° | — |
| Miter capacity | L45° ~ R45° | — |
| Table size | 27.5 in | 24-5/8" x 22-1/4" |
| Fence | Rack And Pinion: Yes | — |
| Speed | 5,000 RPM | — |
| Included | (1) 10'' Table Saw [FX7221], (1) Miter Gauge, (1) Push Stick, (1) Non-thru cut riving Knife, (1) Modular Guard System, (1) Fence, (1) Anti-Kickback Pawls, (1) Blade Change Wrench, (1) Dust Tube | — |
| Weight | 50.7 lbs | 61.7 lbs. |
Each figure is the maker's own, as cited row by row on the FX7221-Z and 2705 pages and listed in the sources below. Where a cell has a dash, 8 of them in this table, the maker pages we cite do not give the figure.
Where to buy
FLEX FX7221-Z
Makita U.S.A. 2705
See it at Makita U.S.A.: 2705
Makita U.S.A.'s own page for the 2705. Not a paid link.
Where the FX7221-Z and 2705 figures differ
- Voltage: FX7221-Z: 24V. 2705: 120V.
- Weight: FX7221-Z: 50.7 lbs. 2705: 61.7 lbs.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Depth of cut: FX7221-Z: 3-5/8 in. 2705: at 90° 3-5/8"; at 45° 2-1/2".
- Table size: FX7221-Z: 27.5 in. 2705: 24-5/8" x 22-1/4".
Cited for one of the pair: only FLEX's cited pages give motor, rip capacity, bevel capacity, miter capacity, fence, speed and included; only Makita U.S.A.'s cited pages give current. The other maker may publish the figure elsewhere; ask it rather than assume the FX7221-Z and 2705 match there.
The FX7221-Z and the 2705 in full
FLEX FX7221-Z
FLEX · jobsite table saw · blade diameter 10 in · rip capacity 30.5 in
Makita U.S.A. 2705
Makita U.S.A. · jobsite table saw · blade diameter 10" · current (amps) 15.0
Every tool we list from FLEX and Makita U.S.A.
Sources
- 10" Table Saw Stacked Lithium Kit | FLEX (FX7221) — FLEX
- Models 2705/2705X1 10" CONTRACTOR TABLE SAW (flyer) — Makita U.S.A.
- Makita U.S.A. 2705 product page — Makita U.S.A.
- Makita U.S.A. 2705 owner's manual — Makita U.S.A.