Bosch GTS15-10
Bosch · jobsite table saw · blade diameter 10 in · current (amps) 15 · rip capacity Right: 32.125 in; Left: 14.125 in
A. 2705
The Makita U.S.A. 2705 is Makita U.S.A.'s 10" Contractor Table Saw, listed with a 10" blade and 15.0 amps. Each figure below comes from Makita U.S.A.'s own pages, with a link to where it appears.
See it at Makita U.S.A.Discontinued. Makita U.S.A.'s own site lists the 2705 as discontinued (read 2026-09-28); it may still be sold while stock lasts. The figures below are Makita U.S.A.'s last published ones, and similar jobsite table saws in our catalogue follow.
Similar tools in our catalogue
SKIL SPT99-11
SKIL · jobsite table saw · blade diameter 10 IN. · current (amps) 15 Amp
SKIL TS6307-00
SKIL · jobsite table saw · blade diameter 10 IN. · current (amps) 15 Amps
What a jobsite table saw is for. On jobsite saws, WEN Products writes: "these are the smallest, usually least-expensive saws, and often have blade diameters of 8" to 8-1/2", though many 10" models exist."
2705 specifications published by Makita U.S.A. (7)
- Current (amps)
- 15.0Models 2705/2705X1 10" CONTRACTOR TABLE SAW (flyer)
- Blade diameter
- 10"Models 2705/2705X1 10" CONTRACTOR TABLE SAW (flyer)
- Depth of cut
- at 90° 3-5/8"; at 45° 2-1/2"Models 2705/2705X1 10" CONTRACTOR TABLE SAW (flyer)
- Table size
- 24-5/8" x 22-1/4"Models 2705/2705X1 10" CONTRACTOR TABLE SAW (flyer)
- Weight
- 61.7 lbs.Models 2705/2705X1 10" CONTRACTOR TABLE SAW (flyer)
As published by Makita U.S.A., read on 2026-09-28. Makers revise their tools; check Makita U.S.A.'s current specification and manual before you buy.
The 2705 manual
Makita U.S.A. publishes Makita U.S.A.'s owner's manual for the 2705 (PDF) and the parts list or diagram (PDF) on its own site. Read it before you buy as well as after: it is where Makita U.S.A. states the 2705 requirements in full.
From the 2705 manual and Makita U.S.A.'s product page (4)
- Kerf width
- 2.6 mm (3/32")Makita U.S.A. 2705 owner's manual
- No load speed
- 4,800/minMakita U.S.A. 2705 owner's manual
- Push stick
- a push stick has been provided with the toolMakita U.S.A. 2705 owner's manual
- Sawdust (no dust port described)
- work bench the same size as the opening in the bottom of the table saw so the sawdust can drop throughMakita U.S.A. 2705 owner's manual
Each row is our short reading of a passage on Makita U.S.A.'s pages, linked to where it appears.
Before you buy the 2705
- Power supply. Makita U.S.A. lists 120V and 15.0 amps for the 2705. Check the manual for the circuit Makita U.S.A. calls for.
Guides that cover jobsite table saws
- Cordless vs corded woodworking tools: the makers' figures side by side
- Jobsite, contractor, hybrid or cabinet table saw: what the makers' specs show
- Track saw vs table saw for sheet goods: cut depth, rail length and rip capacity
- Miter saw vs table saw: what each maker says the tool is for
- How many amps does a table saw draw? The makers' own figures
Questions that include the 2705
Compare the 2705 with
2705 vs 4100XC-10
The 2705 beside the Bosch 4100XC-10, row by row. Both are jobsite table saws with the same blade diameter: blade diameter 10 in on the 4100XC-10, 10" on the 2705, in their makers' figures.
2705 vs GTS15-10
The 2705 beside the Bosch GTS15-10, row by row. Both are jobsite table saws with the same blade diameter: blade diameter 10 in on the GTS15-10, 10" on the 2705, in their makers' figures.
2705 vs FX7221-Z
The 2705 beside the FLEX FX7221-Z, row by row. Both are jobsite table saws with the same blade diameter: blade diameter 10 in on the FX7221-Z, 10" on the 2705, in their makers' figures.
You may also consider
Bosch GTS15-10
Bosch · jobsite table saw · blade diameter 10 in · current (amps) 15 · rip capacity Right: 32.125 in; Left: 14.125 in
SKIL SPT99-11
SKIL · jobsite table saw · blade diameter 10 IN. · current (amps) 15 Amp
SKIL TS6307-00
SKIL · jobsite table saw · blade diameter 10 IN. · current (amps) 15 Amps
Other jobsite table saws
FLEX FX7211-Z
FLEX · jobsite table saw · blade diameter 8-1/4 in · rip capacity 25 in
Bosch GTS18V-08N14
Bosch · jobsite table saw
DEWALT DWE7485
DEWALT · jobsite table saw · rip capacity 24.5-in Of rip capacity
DEWALT DWE7491RS
DEWALT · jobsite table saw · blade diameter 10" · rip capacity 32-1/2 in.
DEWALT DWE7491X
DEWALT · jobsite table saw · rip capacity 32-1/2-in Rip capacity
Bosch 4100XC-10
Bosch · jobsite table saw · blade diameter 10 in · current (amps) 15 · rip capacity Right: 30 in; Left: 8.5 in
2705: questions answered from Makita U.S.A.'s specification
How many amps does the Makita U.S.A. 2705 draw?
The Makita U.S.A. 2705 draws 15.0 amps, by Makita U.S.A.'s figure. Makita U.S.A.'s manual gives the supply the 2705 needs.
What voltage does the Makita U.S.A. 2705 run on?
Makita U.S.A. lists the 2705 at 120V. Makita U.S.A.'s manual gives the supply the 2705 needs.
What blade size does the Makita U.S.A. 2705 take?
The Makita U.S.A. 2705 takes a 10" blade, by Makita U.S.A.'s specification.
How deep does the Makita U.S.A. 2705 cut?
Makita U.S.A. lists depth of cut for the 2705 as: at 90° 3-5/8"; at 45° 2-1/2".
How much does the Makita U.S.A. 2705 weigh?
The Makita U.S.A. 2705 weighs 61.7 lbs., by Makita U.S.A.'s figure.
What arbor size is the Makita U.S.A. 2705?
Makita U.S.A. lists the arbor of the 2705 as 5/8".
Where is the manual for the Makita U.S.A. 2705?
Makita U.S.A. publishes the 2705 manual on its own site; the link is under "The manual" on this page.
Source: Makita U.S.A. 2705 product page
What does Makita U.S.A. say about kerf width on the 2705?
Per Makita U.S.A.'s own pages for the 2705: 2.6 mm (3/32").
What does Makita U.S.A. say about no load speed on the 2705?
Per Makita U.S.A.'s own pages for the 2705: 4,800/min.
What does Makita U.S.A. say about push stick on the 2705?
Per Makita U.S.A.'s own pages for the 2705: a push stick has been provided with the tool.
What does Makita U.S.A. say about sawdust (no dust port described) on the 2705?
Per Makita U.S.A.'s own pages for the 2705: work bench the same size as the opening in the bottom of the table saw so the sawdust can drop through.
Sources
- Models 2705/2705X1 10" CONTRACTOR TABLE SAW (flyer) — Makita U.S.A.
- Makita U.S.A. 2705 product page — Makita U.S.A.
- Makita U.S.A. 2705 owner's manual — Makita U.S.A.