See it at DEWALT: DWE7485
DEWALT's own page for the DWE7485. Not a paid link.
DEWALT DWE7485
The DEWALT DWE7485 is DEWALT's 8-1/4 in. 15A Compact Portable Jobsite Table Saw, listed with 24.5-in Of rip capacity. Each figure below comes from DEWALT's own pages, with a link to where it appears.
See it comparedWhat a jobsite table saw is for. On jobsite saws, WEN Products writes: "these are the smallest, usually least-expensive saws, and often have blade diameters of 8" to 8-1/2", though many 10" models exist."
As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.
Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.
DWE7485 specifications published by DEWALT (7)
- Motor
- Brushed8-1/4 in. 15A Compact Portable Jobsite Table Saw
- Arbor
- 5/8" (16 mm)DEWALT DWE7485 owner's manual
- Rip capacity
- 24.5-in Of rip capacity8-1/4 in. 15A Compact Portable Jobsite Table Saw
- Depth of cut
- Max. Cut Depth, 0° Bevel 2–9/16" (65 mm); Max. Cut Depth, 45° Bevel 1–3/4" (45 mm)DEWALT DWE7485 owner's manual
- Speed
- RPM, no load 5800DEWALT DWE7485 owner's manual
- Included
- (1) Fence, (1) Anti-Kickback Pawls, (1) Miter Gauge, (1) Push Stick, (1) 8-1/4 in Blade, (1) Non-Through Cut Riving Knife, (2) Blade-Change Wrenches, (1) Modular Guard System, (1) DWE7485 8-1/4 in Table Saw8-1/4 in. 15A Compact Portable Jobsite Table Saw
- Warranty
- 3 Year Limited Warranty, 1 Year Free Service, 90 Days Satisfaction Guaranteed8-1/4 in. 15A Compact Portable Jobsite Table Saw
As published by DEWALT, read on 2026-09-28. Makers revise their tools; check DEWALT's current specification and manual before you buy.
The DWE7485 manual
DEWALT publishes DEWALT's owner's manual for the DWE7485 (PDF) and the parts list or diagram on its own site. Read it before you buy as well as after: it is where DEWALT states the DWE7485 requirements in full.
From the DWE7485 manual and DEWALT's product page (2)
- Dado blades
- DO NOT use dado sets, multiple blades or shaping cutter heads on this saw.DEWALT DWE7485 owner's manual
- Specifications
- Table Size 19 X 19" (485 x 485 mm); Miter Angle 30° left and right; Bevel Angle -2° to 47° leftDEWALT DWE7485 owner's manual
Each row is our short reading of a passage on DEWALT's pages, linked to where it appears.
Guides that cover jobsite table saws
- Cordless vs corded woodworking tools: the makers' figures side by side
- Jobsite, contractor, hybrid or cabinet table saw: what the makers' specs show
- Track saw vs table saw for sheet goods: cut depth, rail length and rip capacity
- Miter saw vs table saw: what each maker says the tool is for
- How many amps does a table saw draw? The makers' own figures
Compare the DWE7485 with
DWE7485 vs DWE7491RS
The DWE7485 beside the DEWALT DWE7491RS, row by row. The DWE7485 and DWE7491RS are two jobsite table saws from one maker that people search for together, compared on the maker's published figures.
You may also consider
Bosch GTS15-10
Bosch · jobsite table saw · blade diameter 10 in · current (amps) 15 · rip capacity Right: 32.125 in; Left: 14.125 in
Bosch GTS18V-08N14
Bosch · jobsite table saw
DEWALT DWE7491RS
DEWALT · jobsite table saw · blade diameter 10" · rip capacity 32-1/2 in.
Other jobsite table saws
DEWALT DWE7491X
DEWALT · jobsite table saw · rip capacity 32-1/2-in Rip capacity
FLEX FX7211-Z
FLEX · jobsite table saw · blade diameter 8-1/4 in · rip capacity 25 in
SKIL SPT99-11
SKIL · jobsite table saw · blade diameter 10 IN. · current (amps) 15 Amp
SKIL TS6307-00
SKIL · jobsite table saw · blade diameter 10 IN. · current (amps) 15 Amps
Bosch 4100XC-10
Bosch · jobsite table saw · blade diameter 10 in · current (amps) 15 · rip capacity Right: 30 in; Left: 8.5 in
DEWALT DCS7485B
DEWALT · jobsite table saw
DWE7485: questions answered from DEWALT's specification
What is the rip capacity of the DEWALT DWE7485?
DEWALT lists the rip capacity of the DWE7485 as 24.5-in Of rip capacity.
How deep does the DEWALT DWE7485 cut?
DEWALT lists depth of cut for the DWE7485 as: Max. Cut Depth, 0° Bevel 2–9/16" (65 mm); Max. Cut Depth, 45° Bevel 1–3/4" (45 mm).
Source: DEWALT DWE7485 owner's manual
What warranty does DEWALT give on the DWE7485?
DEWALT lists warranty for the DWE7485 as: 3 Year Limited Warranty, 1 Year Free Service, 90 Days Satisfaction Guaranteed.
What arbor size is the DEWALT DWE7485?
DEWALT lists the arbor of the DWE7485 as 5/8" (16 mm).
Source: DEWALT DWE7485 owner's manual
What comes with the DEWALT DWE7485?
DEWALT lists included for the DWE7485 as: (1) Fence, (1) Anti-Kickback Pawls, (1) Miter Gauge, (1) Push Stick, (1) 8-1/4 in Blade, (1) Non-Through Cut Riving Knife, (2) Blade-Change Wrenches, (1) Modular Guard System, (1) DWE7485 8-1/4 in Table Saw.
Where is the manual for the DEWALT DWE7485?
DEWALT publishes the DWE7485 manual on its own site; the link is under "The manual" on this page.
What does DEWALT say about dado blades on the DWE7485?
Per DEWALT's own pages for the DWE7485: DO NOT use dado sets, multiple blades or shaping cutter heads on this saw.
Source: DEWALT DWE7485 owner's manual
What does DEWALT say about specifications on the DWE7485?
Per DEWALT's own pages for the DWE7485: Table Size 19 X 19" (485 x 485 mm); Miter Angle 30° left and right; Bevel Angle -2° to 47° left.
Source: DEWALT DWE7485 owner's manual