DCS7485B vs GTS18V-08N14
The DCS7485B beside the Bosch GTS18V-08N14, row by row. The GTS18V-08N14 and DCS7485B are jobsite table saws people search for together, compared on their makers' published figures.
DEWALT DCS7485B
The DEWALT DCS7485B is DEWALT's 60V MAX* Table Saw (Tool Only). Each figure below comes from DEWALT's own pages, with a link to where it appears.
See it at DEWALTWhat a jobsite table saw is for. On jobsite saws, WEN Products writes: "these are the smallest, usually least-expensive saws, and often have blade diameters of 8" to 8-1/2", though many 10" models exist."
DCS7485B specifications published by DEWALT (8)
- Motor
- Brushless60V MAX* Table Saw (Tool Only)
- Voltage
- 60V60V MAX* Table Saw (Tool Only)
- Arbor
- 5/8" (16 mm)DEWALT DCS7485B owner's manual
- Depth of cut
- Max. Cut Depth, 0° Bevel 2–9/16" (65 mm); 45° Bevel 1–3/4" (45 mm)DEWALT DCS7485B owner's manual
- Speed
- 5800-rpm60V MAX* Table Saw (Tool Only)
- Included
- (1) Carbide Blade, (1) Push Stick, (1) Blade Guard, (1) Rip Fence, (1) Non-Thru Cut Riving Knife, (2) Blade Wrenches, (1) Miter Gauge, (1) DCS7485 60V MAX* Table Saw60V MAX* Table Saw (Tool Only)
- Weight
- 52.69-lbs60V MAX* Table Saw (Tool Only)
- Warranty
- 3 Year Limited Warranty, 1 Year Free Service, 90 Days Satisfaction Guaranteed60V MAX* Table Saw (Tool Only)
As published by DEWALT, read on 2026-09-28. Makers revise their tools; check DEWALT's current specification and manual before you buy.
The DCS7485B manual
DEWALT publishes DEWALT's owner's manual for the DCS7485B (PDF) and the parts list or diagram on its own site. Read it before you buy as well as after: it is where DEWALT states the DCS7485B requirements in full.
From the DCS7485B manual and DEWALT's product page (2)
- Dado blades
- Do not install dado head or shaping head cutters on this saw.DEWALT DCS7485B owner's manual
- Specifications
- Table Size 19 X 19" (485 x 485 mm); Miter Angle 30° left and right; Bevel Angle -2° to 47° leftDEWALT DCS7485B owner's manual
Each row is our short reading of a passage on DEWALT's pages, linked to where it appears.
Before you buy the DCS7485B
- Power supply. DEWALT lists 60V for the DCS7485B. Check the manual for the circuit DEWALT calls for.
Guides that cover jobsite table saws
- Cordless vs corded woodworking tools: the makers' figures side by side
- Jobsite, contractor, hybrid or cabinet table saw: what the makers' specs show
- Track saw vs table saw for sheet goods: cut depth, rail length and rip capacity
- Miter saw vs table saw: what each maker says the tool is for
- How many amps does a table saw draw? The makers' own figures
Questions that include the DCS7485B
Compare the DCS7485B with
You may also consider
Bosch GTS15-10
Bosch · jobsite table saw · blade diameter 10 in · current (amps) 15 · rip capacity Right: 32.125 in; Left: 14.125 in
Bosch GTS18V-08N14
Bosch · jobsite table saw
DEWALT DWE7485
DEWALT · jobsite table saw · rip capacity 24.5-in Of rip capacity
Other jobsite table saws
DEWALT DWE7491RS
DEWALT · jobsite table saw · blade diameter 10" · rip capacity 32-1/2 in.
DEWALT DWE7491X
DEWALT · jobsite table saw · rip capacity 32-1/2-in Rip capacity
FLEX FX7211-Z
FLEX · jobsite table saw · blade diameter 8-1/4 in · rip capacity 25 in
SKIL SPT99-11
SKIL · jobsite table saw · blade diameter 10 IN. · current (amps) 15 Amp
SKIL TS6307-00
SKIL · jobsite table saw · blade diameter 10 IN. · current (amps) 15 Amps
Bosch 4100XC-10
Bosch · jobsite table saw · blade diameter 10 in · current (amps) 15 · rip capacity Right: 30 in; Left: 8.5 in
DCS7485B: questions answered from DEWALT's specification
What voltage does the DEWALT DCS7485B run on?
DEWALT lists the DCS7485B at 60V. DEWALT's manual gives the supply the DCS7485B needs.
Source: 60V MAX* Table Saw (Tool Only)
How deep does the DEWALT DCS7485B cut?
DEWALT lists depth of cut for the DCS7485B as: Max. Cut Depth, 0° Bevel 2–9/16" (65 mm); 45° Bevel 1–3/4" (45 mm).
Source: DEWALT DCS7485B owner's manual
How much does the DEWALT DCS7485B weigh?
The DEWALT DCS7485B weighs 52.69-lbs, by DEWALT's figure.
Source: 60V MAX* Table Saw (Tool Only)
What warranty does DEWALT give on the DCS7485B?
DEWALT lists warranty for the DCS7485B as: 3 Year Limited Warranty, 1 Year Free Service, 90 Days Satisfaction Guaranteed.
Source: 60V MAX* Table Saw (Tool Only)
What arbor size is the DEWALT DCS7485B?
DEWALT lists the arbor of the DCS7485B as 5/8" (16 mm).
Source: DEWALT DCS7485B owner's manual
What comes with the DEWALT DCS7485B?
DEWALT lists included for the DCS7485B as: (1) Carbide Blade, (1) Push Stick, (1) Blade Guard, (1) Rip Fence, (1) Non-Thru Cut Riving Knife, (2) Blade Wrenches, (1) Miter Gauge, (1) DCS7485 60V MAX* Table Saw.
Source: 60V MAX* Table Saw (Tool Only)
Where is the manual for the DEWALT DCS7485B?
DEWALT publishes the DCS7485B manual on its own site; the link is under "The manual" on this page.
Source: 60V MAX* Table Saw (Tool Only)
What does DEWALT say about dado blades on the DCS7485B?
Per DEWALT's own pages for the DCS7485B: Do not install dado head or shaping head cutters on this saw.
Source: DEWALT DCS7485B owner's manual
What does DEWALT say about specifications on the DCS7485B?
Per DEWALT's own pages for the DCS7485B: Table Size 19 X 19" (485 x 485 mm); Miter Angle 30° left and right; Bevel Angle -2° to 47° left.
Source: DEWALT DCS7485B owner's manual
Sources
- 60V MAX* Table Saw (Tool Only) — DEWALT
- DEWALT DCS7485B owner's manual — DEWALT