See it at DEWALT: DWE7485
DEWALT's own page for the DWE7485. Not a paid link.
DWE7485 vs DWE7491RS
DEWALT DWE7485 vs DEWALT DWE7491RS. Of the 4 figures both makers publish, 2 differ: rip capacity and speed. One is worded too differently to set side by side: depth of cut. The DWE7485 and DWE7491RS are two jobsite table saws from one maker that people search for together, compared on the maker's published figures.
The makers' figures side by side
| Specification | DEWALT DWE7485 | DEWALT DWE7491RS |
|---|---|---|
| Motor | Brushed | — |
| Current (amps) | — | 15 amp |
| Voltage | — | 120V |
| Blade diameter | — | 10" |
| Arbor | 5/8" (16 mm) | 5/8" (16 mm) |
| Rip capacity | 24.5-in Of rip capacity | 32-1/2 in. |
| Depth of cut | Max. Cut Depth, 0° Bevel 2–9/16" (65 mm); Max. Cut Depth, 45° Bevel 1–3/4" (45 mm) | 3-1/8 in. |
| Speed | RPM, no load 5800 | RPM, no load 4800 |
| Included | (1) Fence, (1) Anti-Kickback Pawls, (1) Miter Gauge, (1) Push Stick, (1) 8-1/4 in Blade, (1) Non-Through Cut Riving Knife, (2) Blade-Change Wrenches, (1) Modular Guard System, (1) DWE7485 8-1/4 in Table Saw | — |
| Warranty | 3 Year Limited Warranty, 1 Year Free Service, 90 Days Satisfaction Guaranteed | — |
Each figure is the maker's own, as cited row by row on the DWE7485 and DWE7491RS pages and listed in the sources below. The 6 dashes mark a figure the maker pages we cite do not give, not a zero.
Where to buy
DEWALT DWE7485
As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.
Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.
DEWALT DWE7491RS
Paid links · how this works
Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.
See it at DEWALT: DWE7491RS
DEWALT's own page for the DWE7491RS. Not a paid link.
Where the DWE7485 and DWE7491RS figures differ
- Rip capacity: DWE7485: 24.5-in Of rip capacity. DWE7491RS: 32-1/2 in.
- Speed: DWE7485: RPM, no load 5800. DWE7491RS: RPM, no load 4800.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Depth of cut: DWE7485: Max. Cut Depth, 0° Bevel 2–9/16" (65 mm); Max. Cut Depth, 45° Bevel 1–3/4" (45 mm). DWE7491RS: 3-1/8 in.
One-sided rows: only DEWALT's cited pages give motor, included and warranty; only DEWALT's cited pages give current, voltage and blade diameter. A missing figure is not a zero, so the DWE7485 and DWE7491RS cannot be compared on those rows from these pages.
The DWE7485 and the DWE7491RS in full
DEWALT DWE7485
DEWALT · jobsite table saw · rip capacity 24.5-in Of rip capacity
DEWALT DWE7491RS
DEWALT · jobsite table saw · blade diameter 10" · rip capacity 32-1/2 in.
Every DEWALT tool we list: DEWALT.