See it at Bosch: 4100XC-10
Bosch's own page for the 4100XC-10. Not a paid link.
4100XC-10 vs FX7221-Z
Bosch 4100XC-10 vs FLEX FX7221-Z. Of the 9 figures both makers publish, 3 differ: voltage, speed and weight. 4 are worded too differently to set side by side: rip capacity, depth of cut, bevel capacity and included. Both are jobsite table saws with the same blade diameter, 10 in in both makers' figures.
The makers' figures side by side
| Specification | Bosch 4100XC-10 | FLEX FX7221-Z |
|---|---|---|
| Motor | — | Brushless |
| Current (amps) | 15 | — |
| Voltage | 120V | 24V |
| Blade diameter | 10 in | 10 in |
| Arbor | 5/8" | 5/8 in |
| Rip capacity | Right: 30 in; Left: 8.5 in | 30.5 in |
| Depth of cut | 3-1/8" at 90°; 2-1/4" at 45° | 3-5/8 in |
| Bevel capacity | -2° to 47° | -1° ~ 47° |
| Miter capacity | — | L45° ~ R45° |
| Table size | — | 27.5 in |
| Fence | — | Rack And Pinion: Yes |
| Speed | 3,650 RPM | 5,000 RPM |
| Dust port | Common 2-1/2" Vacuum Hoses; Vacuum Hose Adapter for 35 mm Vacuum Cleaner Hoses, VAC004 | — |
| Included | Includes; (1) 4100 10 In. Worksite Table Saw; (1) Gravity-Rise Table Saw Stand; (1) 10 in. Carbide-Tipped Blade; (1) SquareLock Rip Fence; (1) Auxiliary Fence for Narrow Workpieces; (1) Miter Gauge | (1) 10'' Table Saw [FX7221], (1) Miter Gauge, (1) Push Stick, (1) Non-thru cut riving Knife, (1) Modular Guard System, (1) Fence, (1) Anti-Kickback Pawls, (1) Blade Change Wrench, (1) Dust Tube |
| Dimensions | 27in x 32.5in x 13in | — |
| Weight | 94 lb | 50.7 lbs |
The 4100XC-10 and FX7221-Z pages cite each of these figures row by row, and the sources below list where they were read. Where a cell has a dash, 7 of them in this table, the maker pages we cite do not give the figure.
Where to buy
Bosch 4100XC-10
FLEX FX7221-Z
See it at FLEX: FX7221-Z
FLEX's own page for the FX7221-Z. Not a paid link.
Where the 4100XC-10 and FX7221-Z figures differ
- Voltage: 4100XC-10: 120V. FX7221-Z: 24V.
- Speed: 4100XC-10: 3,650 RPM. FX7221-Z: 5,000 RPM.
- Weight: 4100XC-10: 94 lb. FX7221-Z: 50.7 lbs.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Rip capacity: 4100XC-10: Right: 30 in; Left: 8.5 in. FX7221-Z: 30.5 in.
- Depth of cut: 4100XC-10: 3-1/8" at 90°; 2-1/4" at 45°. FX7221-Z: 3-5/8 in.
- Bevel capacity: 4100XC-10: -2° to 47°. FX7221-Z: -1° ~ 47°.
- Included: 4100XC-10: Includes; (1) 4100 10 In. Worksite Table Saw; (1) Gravity-Rise Table Saw Stand; (1) 10 in. Carbide-Tipped Blade; (1) SquareLock Rip Fence; (1) Auxiliary Fence for Narrow Workpieces; (1) Miter Gauge. FX7221-Z: (1) 10'' Table Saw [FX7221], (1) Miter Gauge, (1) Push Stick, (1) Non-thru cut riving Knife, (1) Modular Guard System, (1) Fence, (1) Anti-Kickback Pawls, (1) Blade Change Wrench, (1) Dust Tube.
Cited for one of the pair: only Bosch's cited pages give current, dust port and dimensions; only FLEX's cited pages give motor, miter capacity, table size and fence. The other maker may publish the figure elsewhere; ask it rather than assume the 4100XC-10 and FX7221-Z match there.
The 4100XC-10 and the FX7221-Z in full
Bosch 4100XC-10
Bosch · jobsite table saw · blade diameter 10 in · current (amps) 15 · rip capacity Right: 30 in; Left: 8.5 in
FLEX FX7221-Z
FLEX · jobsite table saw · blade diameter 10 in · rip capacity 30.5 in