Skip to content
Menu

Harvey Woodworking G-800Pro

The Harvey Woodworking G-800Pro is Harvey Woodworking's GYRO AIR G-800Pro Industrial Dust Processor, listed with an airflow of 1235 CFM, 2.2 kW (3 HP) and a filtration of 99.35% @ 0.3–0.5 μm. Every figure on this page is Harvey Woodworking's own and links to where Harvey Woodworking published it.

Buy from Harvey Woodworking

What a dust collector is for. WEN Products writes: "Wet/dry vacuums offer higher pressure and lower flow rates. Dust collectors offer lower pressure but higher flow rates."

G-800Pro specifications published by Harvey Woodworking (14)
Motor
220V / 3-PhaseGYRO AIR G-800Pro Industrial Dust Processor – Harvey Woodworking
Horsepower
2.2 kW (3 HP)GYRO AIR G-800Pro Industrial Dust Processor – Harvey Woodworking
Current (amps)
8.2AGYRO AIR G-800Pro Industrial Dust Processor – Harvey Woodworking
Voltage
200–240V, Single Phase, 50/60HzGYRO AIR G-800Pro Industrial Dust Processor – Harvey Woodworking
Speed
2400–4500 RPM variableGYRO AIR G-800Pro Industrial Dust Processor – Harvey Woodworking
Airflow
1235 CFMGYRO AIR G-800Pro Industrial Dust Processor – Harvey Woodworking
Static pressure
19-1/4 inches of waterGYRO AIR G-800Pro Industrial Dust Processor – Harvey Woodworking
Inlet
6 inchGYRO AIR G-800Pro Industrial Dust Processor – Harvey Woodworking
Filtration
99.35% @ 0.3–0.5 μmGYRO AIR G-800Pro Industrial Dust Processor – Harvey Woodworking
Collection capacity
33 gallonsGYRO AIR G-800Pro Industrial Dust Processor – Harvey Woodworking
Noise level
60–71 dBAGYRO AIR G-800Pro Industrial Dust Processor – Harvey Woodworking
Included
Main Dust Processor Unit (1); Remote Control (2); Dust Bin Disposable Liners (10); Hex Wrench Set (8 pieces); Open-End Wrench 14–17mm (1); Instruction Manual (1)GYRO AIR G-800Pro Industrial Dust Processor – Harvey Woodworking
Weight
650 lbsGYRO AIR G-800Pro Industrial Dust Processor – Harvey Woodworking
Price on the maker's site
$5,199.00 (harveywoodworking.com, 28 Sep 2026)GYRO AIR G-800Pro Industrial Dust Processor – Harvey Woodworking

Harvey Woodworking's figures for the G-800Pro, read on 2026-09-28. Harvey Woodworking may have revised them since; the current specification and manual are on its site.

From the G-800Pro manual and Harvey Woodworking's product page (1)
bin capacity
Max Dust Bin Capacity: 33 gallons; Fine Dust Box Capacity: 4 gallonsGYRO AIR G-800Pro Industrial Dust Processor – Harvey Woodworking

Each row is our short reading of a passage on Harvey Woodworking's pages, linked to where it appears.

Before you buy the G-800Pro

  • Power supply. Harvey Woodworking lists 200–240V, Single Phase, 50/60Hz and 8.2A for the G-800Pro. Harvey Woodworking's manual gives the circuit to run it on.

Guides that cover dust collectors

Questions that include the G-800Pro

Compare the G-800Pro with

G-800Pro vs G-700

The G-800Pro beside the Harvey Woodworking G-700, row by row. The G-700 and G-800Pro are two dust collectors from one maker that people search for together, compared on the maker's published figures.

G-800Pro vs DC-1100VX-CK

The G-800Pro beside the JET DC-1100VX-CK, row by row. Both are dust collectors, compared on the 6 figures published for both.

G-800Pro vs JCDC-3

The G-800Pro beside the JET JCDC-3, row by row. Both are dust collectors with a similar stated airflow: stated airflow 1235 CFM on the G-800Pro, 1240 CFM (2102 m3/hr) on the JCDC-3, in their makers' figures.

G-800Pro vs PM1300TX-CK

The G-800Pro beside the Powermatic PM1300TX-CK, row by row. Both are dust collectors with a similar stated airflow: stated airflow 1235 CFM on the G-800Pro, 1300 CFM on the PM1300TX-CK, in their makers' figures.

You may also consider

JET JCDC-3

JET · dust collector · airflow 1240 CFM (2102 m3/hr) · horsepower 3 HP (2.2kW)

JET DC-650BK

JET · dust collector · airflow 650 CFM · horsepower 1 HP · filtration 96% of 30 micron particles

Other dust collectors

Harvey Woodworking G-700

Harvey Woodworking · dust collector · airflow 1110 CFM | 1885 m³/h · horsepower 1.5 kW (2 HP)

JET JCDC-1.5

JET · dust collector · airflow 763 CFM (1293 m3/hr) · horsepower 1-1/2 HP (1.1kW)

G-800Pro: questions answered from Harvey Woodworking's specification

How powerful is the Harvey Woodworking G-800Pro?

Harvey Woodworking rates the G-800Pro at 2.2 kW (3 HP).

Source: GYRO AIR G-800Pro Industrial Dust Processor – Harvey Woodworking

How many amps does the Harvey Woodworking G-800Pro draw?

The Harvey Woodworking G-800Pro draws 8.2A, by Harvey Woodworking's figure. Check the manual for the circuit Harvey Woodworking requires.

Source: GYRO AIR G-800Pro Industrial Dust Processor – Harvey Woodworking

What voltage does the Harvey Woodworking G-800Pro run on?

Harvey Woodworking lists the G-800Pro at 200–240V, Single Phase, 50/60Hz. Check the manual for the circuit Harvey Woodworking requires.

Source: GYRO AIR G-800Pro Industrial Dust Processor – Harvey Woodworking

What airflow does Harvey Woodworking state for the Harvey Woodworking G-800Pro?

Harvey Woodworking states 1235 CFM for the G-800Pro. Makers measure airflow in different ways, so compare the wording as well as the number.

Source: GYRO AIR G-800Pro Industrial Dust Processor – Harvey Woodworking

What filtration does the Harvey Woodworking G-800Pro have?

Harvey Woodworking lists the filtration of the G-800Pro as: 99.35% @ 0.3–0.5 μm.

Source: GYRO AIR G-800Pro Industrial Dust Processor – Harvey Woodworking

How much does the Harvey Woodworking G-800Pro weigh?

The Harvey Woodworking G-800Pro weighs 650 lbs, by Harvey Woodworking's figure.

Source: GYRO AIR G-800Pro Industrial Dust Processor – Harvey Woodworking

What comes with the Harvey Woodworking G-800Pro?

Harvey Woodworking lists included for the G-800Pro as: Main Dust Processor Unit (1); Remote Control (2); Dust Bin Disposable Liners (10); Hex Wrench Set (8 pieces); Open-End Wrench 14–17mm (1); Instruction Manual (1).

Source: GYRO AIR G-800Pro Industrial Dust Processor – Harvey Woodworking

What does the G-800Pro cost on Harvey Woodworking's site?

Harvey Woodworking's own site showed $5,199.00 (harveywoodworking.com, 28 Sep 2026) for the G-800Pro. That is the maker's price, not a retailer's or Amazon's; prices change, and the seller's page shows the current one.

Source: GYRO AIR G-800Pro Industrial Dust Processor – Harvey Woodworking

What does Harvey Woodworking say about bin capacity on the G-800Pro?

Per Harvey Woodworking's own pages for the G-800Pro: Max Dust Bin Capacity: 33 gallons; Fine Dust Box Capacity: 4 gallons.

Source: GYRO AIR G-800Pro Industrial Dust Processor – Harvey Woodworking

Every Harvey Woodworking tool on Taikra · All dust collectors compared

Sources

  1. GYRO AIR G-800Pro Industrial Dust Processor – Harvey Woodworking — Harvey Woodworking