Buy from Harvey Woodworking: G-800Pro
Harvey Woodworking's own page for the G-800Pro. Not a paid link.
G-800Pro vs JCDC-3
Harvey Woodworking G-800Pro vs JET JCDC-3. Of the 11 figures both makers publish, 5 differ: current, airflow, inlet and collection capacity and 1 more. 6 are worded too differently to set side by side: motor, horsepower, voltage and static pressure and 2 more. Both are dust collectors with a similar stated airflow: stated airflow 1235 CFM on the G-800Pro, 1240 CFM (2102 m3/hr) on the JCDC-3, in their makers' figures.
The makers' figures side by side
| Specification | Harvey Woodworking G-800Pro | JET JCDC-3 |
|---|---|---|
| Motor | 220V / 3-Phase | totally enclosed fan cooled, induction, capacitor start |
| Horsepower | 2.2 kW (3 HP) | 3 HP (2.2kW) |
| Current (amps) | 8.2A | 13 A |
| Voltage | 200–240V, Single Phase, 50/60Hz | 230V only |
| Phase | — | single |
| Speed | 2400–4500 RPM variable | — |
| Airflow | 1235 CFM | 1240 CFM (2102 m3/hr) |
| Static pressure | 19-1/4 inches of water | 8.976 inH2O (228 mmH2O) |
| Inlet | 6 inch | 8 in. (203 mm) |
| Filtration | 99.35% @ 0.3–0.5 μm | 99% of 2 micron particles; 86% of 1 micron particles |
| Collection capacity | 33 gallons | 66 gal. |
| Noise level | 60–71 dBA | 76 dB |
| Dust port | — | Inlet diameter 8 in. (203 mm); 3 inlet adaptors, 4in. (100 mm) |
| Included | Main Dust Processor Unit (1); Remote Control (2); Dust Bin Disposable Liners (10); Hex Wrench Set (8 pieces); Open-End Wrench 14–17mm (1); Instruction Manual (1) | — |
| Dimensions | — | 30-7/16 x 57 x 88 in. (772 x 1450 x 2235 mm) |
| Weight | 650 lbs | 238 lb. (108 kg) |
| Price on the maker's site | $5,199.00 (harveywoodworking.com, 28 Sep 2026) | — |
Each figure is the maker's own, as cited row by row on the G-800Pro and JCDC-3 pages and listed in the sources below. A dash (6 here) means the figure is not on the maker pages we cite.
Where to buy
Harvey Woodworking G-800Pro
JET JCDC-3
As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.
Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.
See it at JET: JCDC-3
JET's own page for the JCDC-3. Not a paid link.
Where the G-800Pro and JCDC-3 figures differ
- Current (amps): G-800Pro: 8.2A. JCDC-3: 13 A.
- Airflow: G-800Pro: 1235 CFM. JCDC-3: 1240 CFM (2102 m3/hr).
- Inlet: G-800Pro: 6 inch. JCDC-3: 8 in. (203 mm).
- Collection capacity: G-800Pro: 33 gallons. JCDC-3: 66 gal.
- Weight: G-800Pro: 650 lbs. JCDC-3: 238 lb. (108 kg).
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Motor: G-800Pro: 220V / 3-Phase. JCDC-3: totally enclosed fan cooled, induction, capacitor start.
- Horsepower: G-800Pro: 2.2 kW (3 HP). JCDC-3: 3 HP (2.2kW).
- Voltage: G-800Pro: 200–240V, Single Phase, 50/60Hz. JCDC-3: 230V only.
- Static pressure: G-800Pro: 19-1/4 inches of water. JCDC-3: 8.976 inH2O (228 mmH2O).
- Filtration: G-800Pro: 99.35% @ 0.3–0.5 μm. JCDC-3: 99% of 2 micron particles; 86% of 1 micron particles.
- Noise level: G-800Pro: 60–71 dBA. JCDC-3: 76 dB.
Where the table has one figure and a dash, only Harvey Woodworking's cited pages give speed, included and price on the maker's site; only JET's cited pages give phase, dust port and dimensions. Those rows are open questions for the other maker, not ties between the G-800Pro and JCDC-3.
The G-800Pro and the JCDC-3 in full
Harvey Woodworking G-800Pro
Harvey Woodworking · dust collector · airflow 1235 CFM · horsepower 2.2 kW (3 HP) · filtration 99.35% @ 0.3–0.5 μm
JET JCDC-3
JET · dust collector · airflow 1240 CFM (2102 m3/hr) · horsepower 3 HP (2.2kW)
Every tool we list from Harvey Woodworking and JET.