See it at JET: JCDC-3
JET's own page for the JCDC-3. Not a paid link.
The JET JCDC-3 is JET's JCDC-3 Cyclone Dust Collector Kit, 3HP, 230V, listed with an airflow of 1240 CFM (2102 m3/hr) and 3 HP (2.2kW). Each figure below comes from JET's own pages, with a link to where it appears.
See it comparedWhat a dust collector is for. WEN Products writes: "Wet/dry vacuums offer higher pressure and lower flow rates. Dust collectors offer lower pressure but higher flow rates."
As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.
JET's own page for the JCDC-3. Not a paid link.
As published by JET, read on 2026-09-28. Makers revise their tools; check JET's current specification and manual before you buy.
JET publishes JET's owner's manual for the JCDC-3 (PDF) and the parts list or diagram (PDF) on its own site. Read it before you buy as well as after: it is where JET states the JCDC-3 requirements in full.
JET's own wording, row by row, with a link to the page each was read from.
The JCDC-3 beside the Harvey Woodworking G-700, row by row. Both are dust collectors with a similar stated airflow: stated airflow 1110 CFM | 1885 m³/h on the G-700, 1240 CFM (2102 m3/hr) on the JCDC-3, in their makers' figures.
The JCDC-3 beside the Harvey Woodworking G-800Pro, row by row. Both are dust collectors with a similar stated airflow: stated airflow 1235 CFM on the G-800Pro, 1240 CFM (2102 m3/hr) on the JCDC-3, in their makers' figures.
The JCDC-3 beside the Powermatic PM1300TX-CK, row by row. Both are dust collectors with a similar stated airflow: stated airflow 1240 CFM (2102 m3/hr) on the JCDC-3, 1300 CFM on the PM1300TX-CK, in their makers' figures.
JET · dust collector · airflow 1100 CFM
JET · dust collector · airflow 650 CFM · horsepower 1 HP · filtration 96% of 30 micron particles
Harvey Woodworking · dust collector · airflow 1235 CFM · horsepower 2.2 kW (3 HP) · filtration 99.35% @ 0.3–0.5 μm
Powermatic · dust collector · airflow 1300 CFM
Harvey Woodworking · dust collector · airflow 1110 CFM | 1885 m³/h · horsepower 1.5 kW (2 HP)
JET · dust collector · airflow 763 CFM (1293 m3/hr) · horsepower 1-1/2 HP (1.1kW)
Festool USA · dust collector · airflow 138 CFM (3 900 l/min)
Festool USA · dust collector · airflow 138 CFM (3 900 l/min)
JET rates the JCDC-3 at 3 HP (2.2kW).
Source: Operating Instructions and Parts Manual 3HP Mobile Cyclone Dust Collector Model JCDC-3
The JET JCDC-3 draws 13 A, by JET's figure. Check the manual for the circuit JET requires.
Source: Operating Instructions and Parts Manual 3HP Mobile Cyclone Dust Collector Model JCDC-3
JET lists the JCDC-3 at 230V only. Check the manual for the circuit JET requires.
Source: Operating Instructions and Parts Manual 3HP Mobile Cyclone Dust Collector Model JCDC-3
JET states 1240 CFM (2102 m3/hr) for the JCDC-3. Makers measure airflow in different ways, so compare the wording as well as the number.
Source: Operating Instructions and Parts Manual 3HP Mobile Cyclone Dust Collector Model JCDC-3
JET lists filtration for the JCDC-3 as: 99% of 2 micron particles; 86% of 1 micron particles.
Source: Operating Instructions and Parts Manual 3HP Mobile Cyclone Dust Collector Model JCDC-3
JET lists dust port for the JCDC-3 as: Inlet diameter 8 in. (203 mm); 3 inlet adaptors, 4in. (100 mm).
Source: Operating Instructions and Parts Manual 3HP Mobile Cyclone Dust Collector Model JCDC-3
The JET JCDC-3 weighs 238 lb. (108 kg), by JET's figure.
Source: Operating Instructions and Parts Manual 3HP Mobile Cyclone Dust Collector Model JCDC-3
JET publishes the JCDC-3 manual on its own site; the link is under "The manual" on this page.
Source: Operating Instructions and Parts Manual 3HP Mobile Cyclone Dust Collector Model JCDC-3
Per JET's own pages for the JCDC-3: 1240 CFM (US method); 1963 CFM (EU method), with filters installed.
Source: Operating Instructions and Parts Manual 3HP Mobile Cyclone Dust Collector Model JCDC-3
Per JET's own pages for the JCDC-3: 99% of 2 micron particles; 86% of 1 micron particles.
Source: Operating Instructions and Parts Manual 3HP Mobile Cyclone Dust Collector Model JCDC-3
Per JET's own pages for the JCDC-3: 66 gal.
Source: Operating Instructions and Parts Manual 3HP Mobile Cyclone Dust Collector Model JCDC-3
Per JET's own pages for the JCDC-3: Complete kit 717530K; Main unit only 717530; Canister filter only 717530F.
Source: Operating Instructions and Parts Manual 3HP Mobile Cyclone Dust Collector Model JCDC-3