PM1300TX-CK vs G-700
The PM1300TX-CK beside the Harvey Woodworking G-700, row by row. Both are dust collectors with a similar stated airflow: stated airflow 1110 CFM | 1885 m³/h on the G-700, 1300 CFM on the PM1300TX-CK, in their makers' figures.
Powermatic PM1300TX-CK
The Powermatic PM1300TX-CK is Powermatic's PM1300TX-CK Dust Collector, 1.75HP 1PH 115/230V, 2-Micron Canister Kit, listed with an airflow of 1300 CFM. Each figure below comes from Powermatic's own pages, with a link to where it appears.
See it at PowermaticAt a glance. Among the 7 dust collectors here that state it, the PM1300TX-CK has the highest stated airflow: Powermatic's figure is 1300 CFM.
What a dust collector is for. WEN Products writes: "Wet/dry vacuums offer higher pressure and lower flow rates. Dust collectors offer lower pressure but higher flow rates."
PM1300TX-CK specifications published by Powermatic (12)
- Motor
- 1.75 HP, 1Ph 115/230V (pre-wired 115V), 18/9A, 60HzInstructions and Parts Manual - PM1300TX Dust Collector (2018)
- Voltage
- 115/230 V 1 PhTurboCone Dust Collector 2-Micron Canister | Powermatic
- Airflow
- 1300 CFMTurboCone Dust Collector 2-Micron Canister | Powermatic
- Static pressure
- 11.31 inch of waterInstructions and Parts Manual - PM1300TX Dust Collector (2018)
- Inlet
- two at 4", or one at 6"Instructions and Parts Manual - PM1300TX Dust Collector (2018)
- Filtration
- 86% of 1 micron particles; 98% of 2 micron particlesInstructions and Parts Manual - PM1300TX Dust Collector (2018)
- Collection capacity
- 10 cu. ft.Instructions and Parts Manual - PM1300TX Dust Collector (2018)
- Noise level
- 75-90 dB at 3 feetInstructions and Parts Manual - PM1300TX Dust Collector (2018)
- Dust port
- Inlet Port Diameter (in.) two at 4”, or one at 6”Instructions and Parts Manual - PM1300TX Dust Collector (2018)
- Dimensions
- 37 x 29 x 72Instructions and Parts Manual - PM1300TX Dust Collector (2018)
- Weight
- 154 lbInstructions and Parts Manual - PM1300TX Dust Collector (2018)
- Warranty
- 5 YearTurboCone Dust Collector 2-Micron Canister | Powermatic
As published by Powermatic, read on 2026-09-28. Makers revise their tools; check Powermatic's current specification and manual before you buy.
The PM1300TX-CK manual
Powermatic publishes Powermatic's owner's manual for the PM1300TX-CK (PDF) and the parts list or diagram (PDF) on its own site. Read it before you buy as well as after: it is where Powermatic states the PM1300TX-CK requirements in full.
From the PM1300TX-CK manual and Powermatic's product page (2)
- Canister efficiency
- 86% of 1 micron particles; 98% of 2 micron particlesInstructions and Parts Manual - PM1300TX Dust Collector (2018)
- Stock number
- PM1300TX Base Machine with Canister Filter System 1791079KInstructions and Parts Manual - PM1300TX Dust Collector (2018)
Read on Powermatic's own pages; each row links to where it is written.
Before you buy the PM1300TX-CK
- Power supply. Powermatic lists 115/230 V 1 Ph for the PM1300TX-CK. Powermatic's manual gives the circuit to run it on.
- Dust port. Powermatic lists Inlet Port Diameter (in.) two at 4”, or one at 6”; match it to your extractor or collector's hose.
Guides that cover dust collectors
Questions that include the PM1300TX-CK
Compare the PM1300TX-CK with
PM1300TX-CK vs G-800Pro
The PM1300TX-CK beside the Harvey Woodworking G-800Pro, row by row. Both are dust collectors with a similar stated airflow: stated airflow 1235 CFM on the G-800Pro, 1300 CFM on the PM1300TX-CK, in their makers' figures.
PM1300TX-CK vs JCDC-3
The PM1300TX-CK beside the JET JCDC-3, row by row. Both are dust collectors with a similar stated airflow: stated airflow 1240 CFM (2102 m3/hr) on the JCDC-3, 1300 CFM on the PM1300TX-CK, in their makers' figures.
You may also consider
JET JCDC-3
JET · dust collector · airflow 1240 CFM (2102 m3/hr) · horsepower 3 HP (2.2kW)
JET DC-1100VX-CK
JET · dust collector · airflow 1100 CFM
JET DC-650BK
JET · dust collector · airflow 650 CFM · horsepower 1 HP · filtration 96% of 30 micron particles
Other dust collectors
Harvey Woodworking G-800Pro
Harvey Woodworking · dust collector · airflow 1235 CFM · horsepower 2.2 kW (3 HP) · filtration 99.35% @ 0.3–0.5 μm
Harvey Woodworking G-700
Harvey Woodworking · dust collector · airflow 1110 CFM | 1885 m³/h · horsepower 1.5 kW (2 HP)
JET JCDC-1.5
JET · dust collector · airflow 763 CFM (1293 m3/hr) · horsepower 1-1/2 HP (1.1kW)
Festool USA CT 26 EI HEPA (577871)
Festool USA · dust collector · airflow 138 CFM (3 900 l/min)
Festool USA CT 36 EI HEPA (577872)
Festool USA · dust collector · airflow 138 CFM (3 900 l/min)
PM1300TX-CK: questions answered from Powermatic's specification
What voltage does the Powermatic PM1300TX-CK run on?
Powermatic lists the PM1300TX-CK at 115/230 V 1 Ph. Check the manual for the circuit Powermatic requires.
Source: TurboCone Dust Collector 2-Micron Canister | Powermatic
What airflow does Powermatic state for the Powermatic PM1300TX-CK?
Powermatic states 1300 CFM for the PM1300TX-CK. Makers measure airflow in different ways, so compare the wording as well as the number.
Source: TurboCone Dust Collector 2-Micron Canister | Powermatic
What filtration does the Powermatic PM1300TX-CK have?
Powermatic lists filtration for the PM1300TX-CK as: 86% of 1 micron particles; 98% of 2 micron particles.
Source: Instructions and Parts Manual - PM1300TX Dust Collector (2018)
What size is the dust port on the Powermatic PM1300TX-CK?
Powermatic lists the dust port on the PM1300TX-CK as Inlet Port Diameter (in.) two at 4”, or one at 6”.
Source: Instructions and Parts Manual - PM1300TX Dust Collector (2018)
How much does the Powermatic PM1300TX-CK weigh?
The Powermatic PM1300TX-CK weighs 154 lb, by Powermatic's figure.
Source: Instructions and Parts Manual - PM1300TX Dust Collector (2018)
What warranty does Powermatic give on the PM1300TX-CK?
Powermatic lists the warranty on the PM1300TX-CK as: 5 Year.
Source: TurboCone Dust Collector 2-Micron Canister | Powermatic
Where is the manual for the Powermatic PM1300TX-CK?
Powermatic publishes the PM1300TX-CK manual on its own site; the link is under "The manual" on this page.
Source: Instructions and Parts Manual - PM1300TX Dust Collector (2018)
What does Powermatic say about canister efficiency on the PM1300TX-CK?
Per Powermatic's own pages for the PM1300TX-CK: 86% of 1 micron particles; 98% of 2 micron particles.
Source: Instructions and Parts Manual - PM1300TX Dust Collector (2018)
What does Powermatic say about stock number on the PM1300TX-CK?
Per Powermatic's own pages for the PM1300TX-CK: PM1300TX Base Machine with Canister Filter System 1791079K.
Source: Instructions and Parts Manual - PM1300TX Dust Collector (2018)
Sources
- Instructions and Parts Manual - PM1300TX Dust Collector — Powermatic (2018)
- TurboCone Dust Collector 2-Micron Canister | Powermatic — Powermatic