Skip to content
Menu

Harvey Woodworking G-700

The Harvey Woodworking G-700 is Harvey Woodworking's GYRO AIR G-700 Dust Processor, listed with an airflow of 1110 CFM | 1885 m³/h and 1.5 kW (2 HP). Harvey Woodworking published every figure here; each one links to its source.

See it at Harvey Woodworking

What a dust collector is for. WEN Products writes: "Wet/dry vacuums offer higher pressure and lower flow rates. Dust collectors offer lower pressure but higher flow rates."

G-700 specifications published by Harvey Woodworking (15)
Motor
TEFC Induction, 3-PhaseGYRO AIR G-700 Dust Processor – Harvey Woodworking
Horsepower
1.5 kW (2 HP)GYRO AIR G-700 Dust Processor – Harvey Woodworking
Current (amps)
5.8AGYRO AIR G-700 Dust Processor – Harvey Woodworking
Voltage
220V, Single Phase, 50/60HzGYRO AIR G-700 Dust Processor – Harvey Woodworking
Speed
2280–4275 RPM VariableGYRO AIR G-700 Dust Processor – Harvey Woodworking
Variable speed
Yes (40Hz–75Hz)GYRO AIR G-700 Dust Processor – Harvey Woodworking
Airflow
1110 CFM | 1885 m³/hGYRO AIR G-700 Dust Processor – Harvey Woodworking
Static pressure
18-1/2 inches of water | 4600 PaGYRO AIR G-700 Dust Processor – Harvey Woodworking
Inlet
6 inchGYRO AIR G-700 Dust Processor – Harvey Woodworking
Collection capacity
32 gallons | 120 litersGYRO AIR G-700 Dust Processor – Harvey Woodworking
Noise level
61–72 dBAGYRO AIR G-700 Dust Processor – Harvey Woodworking
Dust port
Main Inlet: 6 inch; Adapter Inlets: 4 inch x 2; compatible with 2 inch, 4 inch, and 6 inch hosesGYRO AIR G-700 Dust Processor – Harvey Woodworking
Included
Machine (main unit); 100mm x 2m long flexible hose; Dust extractor adaptor; Handle; Tool set; Wireless remote controlGYRO AIR G-700 Dust Processor – Harvey Woodworking
Dimensions
56-1/4 x 23-1/2 x 33-7/8 inchGYRO AIR G-700 Dust Processor – Harvey Woodworking
Weight
445 lbsGYRO AIR G-700 Dust Processor – Harvey Woodworking

Every row is Harvey Woodworking's own wording, read on 2026-09-28. Check the current G-700 specification on Harvey Woodworking's site before buying; makers revise their tools.

From the G-700 manual and Harvey Woodworking's product page (2)
airflow (CFM)
Max Air Flow: 1110 CFM (1885 m³/h)GYRO AIR G-700 Dust Processor – Harvey Woodworking
bin capacity
Dust Bin Capacity: 32 gallons (120 liters)GYRO AIR G-700 Dust Processor – Harvey Woodworking

Read on Harvey Woodworking's own pages; each row links to where it is written.

What owners report about the G-700

A summary of 11 first-person reports from owners of the Harvey Woodworking G-700, counted at 3 places: Sawmill Creek (9, 2020–2026); Garage Journal (1, 2022–2023); WoodNet Forums (1, 2021). Each theme below appears in at least 3 of the 11. This is what owners of the G-700 wrote, not a finding of ours: Taikra has not used the tool.

  • Owners like: Compact, low form factor (3 of 11 reports)
  • Owners are split on: Noise level (3 of 11 reports)
  • Owners are split on: Airflow for big machines (3 of 11 reports)
  • Owners raise: Inlet grid clogs with long shavings (3 of 11 reports)

Before you buy the G-700

  • Power supply. Harvey Woodworking lists 220V, Single Phase, 50/60Hz and 5.8A for the G-700. Harvey Woodworking's manual gives the circuit to run it on.
  • Dust port. Harvey Woodworking lists Main Inlet: 6 inch; Adapter Inlets: 4 inch x 2; compatible with 2 inch, 4 inch, and 6 inch hoses; check it against the hose on your extractor or collector.

Guides that cover dust collectors

Questions that include the G-700

Compare the G-700 with

G-700 vs G-800Pro

The G-700 beside the Harvey Woodworking G-800Pro, row by row. The G-700 and G-800Pro are two dust collectors from one maker that people search for together, compared on the maker's published figures.

G-700 vs JCDC-1.5

The G-700 beside the JET JCDC-1.5, row by row. Both are dust collectors with a similar stated airflow: stated airflow 1110 CFM | 1885 m³/h on the G-700, 763 CFM (1293 m3/hr) on the JCDC-1.5, in their makers' figures.

G-700 vs JCDC-3

The G-700 beside the JET JCDC-3, row by row. Both are dust collectors with a similar stated airflow: stated airflow 1110 CFM | 1885 m³/h on the G-700, 1240 CFM (2102 m3/hr) on the JCDC-3, in their makers' figures.

G-700 vs PM1300TX-CK

The G-700 beside the Powermatic PM1300TX-CK, row by row. Both are dust collectors with a similar stated airflow: stated airflow 1110 CFM | 1885 m³/h on the G-700, 1300 CFM on the PM1300TX-CK, in their makers' figures.

You may also consider

JET JCDC-3

JET · dust collector · airflow 1240 CFM (2102 m3/hr) · horsepower 3 HP (2.2kW)

JET DC-650BK

JET · dust collector · airflow 650 CFM · horsepower 1 HP · filtration 96% of 30 micron particles

Other dust collectors

Harvey Woodworking G-800Pro

Harvey Woodworking · dust collector · airflow 1235 CFM · horsepower 2.2 kW (3 HP) · filtration 99.35% @ 0.3–0.5 μm

JET JCDC-1.5

JET · dust collector · airflow 763 CFM (1293 m3/hr) · horsepower 1-1/2 HP (1.1kW)

G-700: questions answered from Harvey Woodworking's specification

How powerful is the Harvey Woodworking G-700?

Harvey Woodworking rates the G-700 at 1.5 kW (2 HP).

Source: GYRO AIR G-700 Dust Processor – Harvey Woodworking

How many amps does the Harvey Woodworking G-700 draw?

The Harvey Woodworking G-700 draws 5.8A, by Harvey Woodworking's figure. Harvey Woodworking's manual gives the supply the G-700 needs.

Source: GYRO AIR G-700 Dust Processor – Harvey Woodworking

What voltage does the Harvey Woodworking G-700 run on?

Harvey Woodworking lists the G-700 at 220V, Single Phase, 50/60Hz. Harvey Woodworking's manual gives the supply the G-700 needs.

Source: GYRO AIR G-700 Dust Processor – Harvey Woodworking

What airflow does Harvey Woodworking state for the Harvey Woodworking G-700?

Harvey Woodworking states 1110 CFM | 1885 m³/h for the G-700. Makers measure airflow in different ways, so compare the wording as well as the number.

Source: GYRO AIR G-700 Dust Processor – Harvey Woodworking

What size is the dust port on the Harvey Woodworking G-700?

Harvey Woodworking lists dust port for the G-700 as: Main Inlet: 6 inch; Adapter Inlets: 4 inch x 2; compatible with 2 inch, 4 inch, and 6 inch hoses.

Source: GYRO AIR G-700 Dust Processor – Harvey Woodworking

How much does the Harvey Woodworking G-700 weigh?

The Harvey Woodworking G-700 weighs 445 lbs, by Harvey Woodworking's figure.

Source: GYRO AIR G-700 Dust Processor – Harvey Woodworking

What comes with the Harvey Woodworking G-700?

Harvey Woodworking lists included for the G-700 as: Machine (main unit); 100mm x 2m long flexible hose; Dust extractor adaptor; Handle; Tool set; Wireless remote control.

Source: GYRO AIR G-700 Dust Processor – Harvey Woodworking

What does Harvey Woodworking say about airflow (CFM) on the G-700?

Per Harvey Woodworking's own pages for the G-700: Max Air Flow: 1110 CFM (1885 m³/h).

Source: GYRO AIR G-700 Dust Processor – Harvey Woodworking

What does Harvey Woodworking say about bin capacity on the G-700?

Per Harvey Woodworking's own pages for the G-700: Dust Bin Capacity: 32 gallons (120 liters).

Source: GYRO AIR G-700 Dust Processor – Harvey Woodworking

Every Harvey Woodworking tool on Taikra · All dust collectors compared

Sources

  1. GYRO AIR G-700 Dust Processor – Harvey Woodworking — Harvey Woodworking
  2. Owner reports: Sawmill Creek (thread 1 of 7) — Sawmill Creek
  3. Owner reports: Sawmill Creek (thread 2 of 7) — Sawmill Creek
  4. Owner reports: Sawmill Creek (thread 3 of 7) — Sawmill Creek
  5. Owner reports: Sawmill Creek (thread 4 of 7) — Sawmill Creek
  6. Owner reports: Sawmill Creek (thread 5 of 7) — Sawmill Creek
  7. Owner reports: Sawmill Creek (thread 6 of 7) — Sawmill Creek
  8. Owner reports: Sawmill Creek (thread 7 of 7) — Sawmill Creek
  9. Owner reports: Garage Journal (thread 1 of 3) — Garage Journal
  10. Owner reports: Garage Journal (thread 2 of 3) — Garage Journal
  11. Owner reports: Garage Journal (thread 3 of 3) — Garage Journal
  12. Owner reports: WoodNet Forums (thread 1 of 2) — WoodNet Forums
  13. Owner reports: WoodNet Forums (thread 2 of 2) — WoodNet Forums