Skip to content
Menu

G-700 vs G-800Pro

Harvey Woodworking G-700 vs Harvey Woodworking G-800Pro. Of the 12 figures both makers publish, 7 differ: current, speed, airflow and static pressure and 3 more. 4 are worded too differently to set side by side: motor, horsepower, voltage and included. The G-700 and G-800Pro are two dust collectors from one maker that people search for together, compared on the maker's published figures.

The makers' figures side by side

The makers' figures side by side
SpecificationHarvey Woodworking G-700Harvey Woodworking G-800Pro
MotorTEFC Induction, 3-Phase220V / 3-Phase
Horsepower1.5 kW (2 HP)2.2 kW (3 HP)
Current (amps)5.8A8.2A
Voltage220V, Single Phase, 50/60Hz200–240V, Single Phase, 50/60Hz
Speed2280–4275 RPM Variable2400–4500 RPM variable
Variable speedYes (40Hz–75Hz)—
Airflow1110 CFM | 1885 m³/h1235 CFM
Static pressure18-1/2 inches of water | 4600 Pa19-1/4 inches of water
Inlet6 inch6 inch
Filtration—99.35% @ 0.3–0.5 μm
Collection capacity32 gallons | 120 liters33 gallons
Noise level61–72 dBA60–71 dBA
Dust portMain Inlet: 6 inch; Adapter Inlets: 4 inch x 2; compatible with 2 inch, 4 inch, and 6 inch hoses—
IncludedMachine (main unit); 100mm x 2m long flexible hose; Dust extractor adaptor; Handle; Tool set; Wireless remote controlMain Dust Processor Unit (1); Remote Control (2); Dust Bin Disposable Liners (10); Hex Wrench Set (8 pieces); Open-End Wrench 14–17mm (1); Instruction Manual (1)
Dimensions56-1/4 x 23-1/2 x 33-7/8 inch—
Weight445 lbs650 lbs
Price on the maker's site—$5,199.00 (harveywoodworking.com, 28 Sep 2026)

Each figure is the maker's own, as cited row by row on the G-700 and G-800Pro pages and listed in the sources below. 5 cells show a dash: the maker pages we cite do not state that figure.

Where to buy

Harvey Woodworking G-700

Harvey Woodworking G-800Pro

Where the G-700 and G-800Pro figures differ

  • Current (amps): G-700: 5.8A. G-800Pro: 8.2A.
  • Speed: G-700: 2280–4275 RPM Variable. G-800Pro: 2400–4500 RPM variable.
  • Airflow: G-700: 1110 CFM | 1885 m³/h. G-800Pro: 1235 CFM.
  • Static pressure: G-700: 18-1/2 inches of water | 4600 Pa. G-800Pro: 19-1/4 inches of water.
  • Collection capacity: G-700: 32 gallons | 120 liters. G-800Pro: 33 gallons.
  • Noise level: G-700: 61–72 dBA. G-800Pro: 60–71 dBA.
  • Weight: G-700: 445 lbs. G-800Pro: 650 lbs.

Stated differently, not directly comparable

The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.

  • Motor: G-700: TEFC Induction, 3-Phase. G-800Pro: 220V / 3-Phase.
  • Horsepower: G-700: 1.5 kW (2 HP). G-800Pro: 2.2 kW (3 HP).
  • Voltage: G-700: 220V, Single Phase, 50/60Hz. G-800Pro: 200–240V, Single Phase, 50/60Hz.
  • Included: G-700: Machine (main unit); 100mm x 2m long flexible hose; Dust extractor adaptor; Handle; Tool set; Wireless remote control. G-800Pro: Main Dust Processor Unit (1); Remote Control (2); Dust Bin Disposable Liners (10); Hex Wrench Set (8 pieces); Open-End Wrench 14–17mm (1); Instruction Manual (1).

Figures cited for one of the two: only Harvey Woodworking's cited pages give variable speed, dust port and dimensions; only Harvey Woodworking's cited pages give filtration and price on the maker's site. Ask the other maker before treating the G-700 and G-800Pro as equal on those points.

The G-700 and the G-800Pro in full

Harvey Woodworking G-700

Harvey Woodworking · dust collector · airflow 1110 CFM | 1885 m³/h · horsepower 1.5 kW (2 HP)

Harvey Woodworking G-800Pro

Harvey Woodworking · dust collector · airflow 1235 CFM · horsepower 2.2 kW (3 HP) · filtration 99.35% @ 0.3–0.5 μm

Every Harvey Woodworking tool we list: Harvey Woodworking.

Sources

  1. GYRO AIR G-700 Dust Processor – Harvey Woodworking — Harvey Woodworking
  2. GYRO AIR G-800Pro Industrial Dust Processor – Harvey Woodworking — Harvey Woodworking