Buy from Harvey Woodworking: G-800Pro
Harvey Woodworking's own page for the G-800Pro. Not a paid link.
G-800Pro vs PM1300TX-CK
Harvey Woodworking G-800Pro vs Powermatic PM1300TX-CK. Of the 9 figures both makers publish, 3 differ: airflow, static pressure and weight. 6 are worded too differently to set side by side: motor, voltage, inlet and filtration and 2 more. Both are dust collectors with a similar stated airflow: stated airflow 1235 CFM on the G-800Pro, 1300 CFM on the PM1300TX-CK, in their makers' figures.
The makers' figures side by side
| Specification | Harvey Woodworking G-800Pro | Powermatic PM1300TX-CK |
|---|---|---|
| Motor | 220V / 3-Phase | 1.75 HP, 1Ph 115/230V (pre-wired 115V), 18/9A, 60Hz |
| Horsepower | 2.2 kW (3 HP) | — |
| Current (amps) | 8.2A | — |
| Voltage | 200–240V, Single Phase, 50/60Hz | 115/230 V 1 Ph |
| Speed | 2400–4500 RPM variable | — |
| Airflow | 1235 CFM | 1300 CFM |
| Static pressure | 19-1/4 inches of water | 11.31 inch of water |
| Inlet | 6 inch | two at 4", or one at 6" |
| Filtration | 99.35% @ 0.3–0.5 μm | 86% of 1 micron particles; 98% of 2 micron particles |
| Collection capacity | 33 gallons | 10 cu. ft. |
| Noise level | 60–71 dBA | 75-90 dB at 3 feet |
| Dust port | — | Inlet Port Diameter (in.) two at 4”, or one at 6” |
| Included | Main Dust Processor Unit (1); Remote Control (2); Dust Bin Disposable Liners (10); Hex Wrench Set (8 pieces); Open-End Wrench 14–17mm (1); Instruction Manual (1) | — |
| Dimensions | — | 37 x 29 x 72 |
| Weight | 650 lbs | 154 lb |
| Warranty | — | 5 Year |
| Price on the maker's site | $5,199.00 (harveywoodworking.com, 28 Sep 2026) | — |
The G-800Pro and PM1300TX-CK pages cite each of these figures row by row, and the sources below list where they were read. A dash (8 here) means the figure is not on the maker pages we cite.
Where to buy
Harvey Woodworking G-800Pro
Powermatic PM1300TX-CK
See it at Powermatic: PM1300TX-CK
Powermatic's own page for the PM1300TX-CK. Not a paid link.
Where the G-800Pro and PM1300TX-CK figures differ
- Airflow: G-800Pro: 1235 CFM. PM1300TX-CK: 1300 CFM.
- Static pressure: G-800Pro: 19-1/4 inches of water. PM1300TX-CK: 11.31 inch of water.
- Weight: G-800Pro: 650 lbs. PM1300TX-CK: 154 lb.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Motor: G-800Pro: 220V / 3-Phase. PM1300TX-CK: 1.75 HP, 1Ph 115/230V (pre-wired 115V), 18/9A, 60Hz.
- Voltage: G-800Pro: 200–240V, Single Phase, 50/60Hz. PM1300TX-CK: 115/230 V 1 Ph.
- Inlet: G-800Pro: 6 inch. PM1300TX-CK: two at 4", or one at 6".
- Filtration: G-800Pro: 99.35% @ 0.3–0.5 μm. PM1300TX-CK: 86% of 1 micron particles; 98% of 2 micron particles.
- Collection capacity: G-800Pro: 33 gallons. PM1300TX-CK: 10 cu. ft.
- Noise level: G-800Pro: 60–71 dBA. PM1300TX-CK: 75-90 dB at 3 feet.
Where the table has one figure and a dash, only Harvey Woodworking's cited pages give horsepower, current, speed, included and price on the maker's site; only Powermatic's cited pages give dust port, dimensions and warranty. Those rows are open questions for the other maker, not ties between the G-800Pro and PM1300TX-CK.
The G-800Pro and the PM1300TX-CK in full
Harvey Woodworking G-800Pro
Harvey Woodworking · dust collector · airflow 1235 CFM · horsepower 2.2 kW (3 HP) · filtration 99.35% @ 0.3–0.5 μm
Powermatic PM1300TX-CK
Powermatic · dust collector · airflow 1300 CFM
Every tool we list from Harvey Woodworking and Powermatic.
Sources
- GYRO AIR G-800Pro Industrial Dust Processor – Harvey Woodworking — Harvey Woodworking
- Instructions and Parts Manual - PM1300TX Dust Collector — Powermatic (2018)
- TurboCone Dust Collector 2-Micron Canister | Powermatic — Powermatic