Buy from Harvey Woodworking: G-800Pro
Harvey Woodworking's own page for the G-800Pro. Not a paid link.
G-800Pro vs DC-1100VX-CK
Harvey Woodworking G-800Pro vs JET DC-1100VX-CK. Of the 6 figures both makers publish, 1 differs: airflow. 5 are worded too differently to set side by side: motor, voltage, inlet and filtration and 1 more. Both are dust collectors, compared on the 6 figures published for both.
The makers' figures side by side
| Specification | Harvey Woodworking G-800Pro | JET DC-1100VX-CK |
|---|---|---|
| Motor | 220V / 3-Phase | TEFC, 1-1/2 HP, 1PH, 115/230V, Prewired 115V, 11/5.5 A, 60Hz |
| Horsepower | 2.2 kW (3 HP) | — |
| Current (amps) | 8.2A | — |
| Voltage | 200–240V, Single Phase, 50/60Hz | 115/230 V 1 Ph |
| Speed | 2400–4500 RPM variable | — |
| Airflow | 1235 CFM | 1100 CFM |
| Static pressure | 19-1/4 inches of water | — |
| Inlet | 6 inch | 4 or 6 in. |
| Filtration | 99.35% @ 0.3–0.5 μm | 86% of 1 micron particles; 98% of 2 micron particles |
| Collection capacity | 33 gallons | — |
| Noise level | 60–71 dBA | 70-80 db |
| Included | Main Dust Processor Unit (1); Remote Control (2); Dust Bin Disposable Liners (10); Hex Wrench Set (8 pieces); Open-End Wrench 14–17mm (1); Instruction Manual (1) | — |
| Weight | 650 lbs | — |
| Price on the maker's site | $5,199.00 (harveywoodworking.com, 28 Sep 2026) | — |
Each figure is the maker's own, as cited row by row on the G-800Pro and DC-1100VX-CK pages and listed in the sources below. The 8 dashes mark a figure the maker pages we cite do not give, not a zero.
Where to buy
Harvey Woodworking G-800Pro
JET DC-1100VX-CK
As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.
Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.
See it at JET: DC-1100VX-CK
JET's own page for the DC-1100VX-CK. Not a paid link.
Where the G-800Pro and DC-1100VX-CK figures differ
- Airflow: G-800Pro: 1235 CFM. DC-1100VX-CK: 1100 CFM.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Motor: G-800Pro: 220V / 3-Phase. DC-1100VX-CK: TEFC, 1-1/2 HP, 1PH, 115/230V, Prewired 115V, 11/5.5 A, 60Hz.
- Voltage: G-800Pro: 200–240V, Single Phase, 50/60Hz. DC-1100VX-CK: 115/230 V 1 Ph.
- Inlet: G-800Pro: 6 inch. DC-1100VX-CK: 4 or 6 in.
- Filtration: G-800Pro: 99.35% @ 0.3–0.5 μm. DC-1100VX-CK: 86% of 1 micron particles; 98% of 2 micron particles.
- Noise level: G-800Pro: 60–71 dBA. DC-1100VX-CK: 70-80 db.
One-sided rows: only Harvey Woodworking's cited pages give horsepower, current, speed, static pressure, collection capacity, included, weight and price on the maker's site. A missing figure is not a zero, so the G-800Pro and DC-1100VX-CK cannot be compared on those rows from these pages.
The G-800Pro and the DC-1100VX-CK in full
Harvey Woodworking G-800Pro
Harvey Woodworking · dust collector · airflow 1235 CFM · horsepower 2.2 kW (3 HP) · filtration 99.35% @ 0.3–0.5 μm
JET DC-1100VX-CK
JET · dust collector · airflow 1100 CFM
Every tool we list from Harvey Woodworking and JET.