Bosch GTS15-10
Bosch · jobsite table saw · blade diameter 10 in · current (amps) 15 · rip capacity Right: 32.125 in; Left: 14.125 in
A. 2705X1
The Makita U.S.A. 2705X1 is Makita U.S.A.'s 10" Contractor Table Saw (Includes Portable Table Saw Stand), listed with a 10" blade and 15.0 amps. Every figure on this page is Makita U.S.A.'s own and links to where Makita U.S.A. published it.
See it at Makita U.S.A.Discontinued. Makita U.S.A.'s own site lists the 2705X1 as discontinued (read 2026-09-28); it may still be sold while stock lasts. The figures below are Makita U.S.A.'s last published ones, and similar jobsite table saws in our catalogue follow.
Similar tools in our catalogue
SKIL SPT99-11
SKIL · jobsite table saw · blade diameter 10 IN. · current (amps) 15 Amp
SKIL TS6307-00
SKIL · jobsite table saw · blade diameter 10 IN. · current (amps) 15 Amps
What a jobsite table saw is for. On jobsite saws, WEN Products writes: "these are the smallest, usually least-expensive saws, and often have blade diameters of 8" to 8-1/2", though many 10" models exist."
2705X1 specifications published by Makita U.S.A. (7)
- Current (amps)
- 15.0Models 2705/2705X1 10" CONTRACTOR TABLE SAW (flyer)
- Blade diameter
- 10"Models 2705/2705X1 10" CONTRACTOR TABLE SAW (flyer)
- Depth of cut
- at 90° 3-5/8"; at 45° 2-1/2"Models 2705/2705X1 10" CONTRACTOR TABLE SAW (flyer)
- Table size
- 24-5/8" x 22-1/4"Models 2705/2705X1 10" CONTRACTOR TABLE SAW (flyer)
- Weight
- 114.7 lbs.Models 2705/2705X1 10" CONTRACTOR TABLE SAW (flyer)
Makita U.S.A.'s figures for the 2705X1, read on 2026-09-28. Makita U.S.A. may have revised them since; the current specification and manual are on its site.
The 2705X1 manual
Makita U.S.A. publishes Makita U.S.A.'s owner's manual for the 2705X1 (PDF) and the parts list or diagram (PDF) on its own site. Setup, capacities and safety requirements for the 2705X1 are in the manual; it is the document to read before buying.
From the 2705X1 manual and Makita U.S.A.'s product page (5)
- Status
- DISCONTINUEDMakita USA - Product Details -2705X1
- Kerf width
- 2.6 mm (3/32")Makita U.S.A. 2705X1 owner's manual
- No load speed
- 4,800/minMakita U.S.A. 2705X1 owner's manual
- Push stick
- a push stick has been provided with the toolMakita U.S.A. 2705X1 owner's manual
- Sawdust (no dust port described)
- work bench the same size as the opening in the bottom of the table saw so the sawdust can drop throughMakita U.S.A. 2705X1 owner's manual
Read on Makita U.S.A.'s own pages; each row links to where it is written.
Before you buy the 2705X1
- Power supply. Makita U.S.A. lists 120V and 15.0 amps for the 2705X1. Makita U.S.A.'s manual gives the circuit to run it on.
Guides that cover jobsite table saws
- Cordless vs corded woodworking tools: the makers' figures side by side
- Jobsite, contractor, hybrid or cabinet table saw: what the makers' specs show
- Track saw vs table saw for sheet goods: cut depth, rail length and rip capacity
- Miter saw vs table saw: what each maker says the tool is for
- How many amps does a table saw draw? The makers' own figures
Questions that include the 2705X1
Compare the 2705X1 with
2705X1 vs 4100XC-10
The 2705X1 beside the Bosch 4100XC-10, row by row. Both are jobsite table saws with the same blade diameter: blade diameter 10 in on the 4100XC-10, 10" on the 2705X1, in their makers' figures.
2705X1 vs GTS15-10
The 2705X1 beside the Bosch GTS15-10, row by row. Both are jobsite table saws with the same blade diameter: blade diameter 10 in on the GTS15-10, 10" on the 2705X1, in their makers' figures.
2705X1 vs C10RJS
The 2705X1 beside the Metabo HPT C10RJS, row by row. Both are jobsite table saws with the same blade diameter, 10" in both makers' figures.
You may also consider
Bosch GTS15-10
Bosch · jobsite table saw · blade diameter 10 in · current (amps) 15 · rip capacity Right: 32.125 in; Left: 14.125 in
SKIL SPT99-11
SKIL · jobsite table saw · blade diameter 10 IN. · current (amps) 15 Amp
SKIL TS6307-00
SKIL · jobsite table saw · blade diameter 10 IN. · current (amps) 15 Amps
Other jobsite table saws
FLEX FX7211-Z
FLEX · jobsite table saw · blade diameter 8-1/4 in · rip capacity 25 in
Bosch GTS18V-08N14
Bosch · jobsite table saw
DEWALT DWE7485
DEWALT · jobsite table saw · rip capacity 24.5-in Of rip capacity
DEWALT DWE7491RS
DEWALT · jobsite table saw · blade diameter 10" · rip capacity 32-1/2 in.
DEWALT DWE7491X
DEWALT · jobsite table saw · rip capacity 32-1/2-in Rip capacity
Bosch 4100XC-10
Bosch · jobsite table saw · blade diameter 10 in · current (amps) 15 · rip capacity Right: 30 in; Left: 8.5 in
2705X1: questions answered from Makita U.S.A.'s specification
How many amps does the Makita U.S.A. 2705X1 draw?
The Makita U.S.A. 2705X1 draws 15.0 amps, by Makita U.S.A.'s figure. The manual states the circuit it needs.
What voltage does the Makita U.S.A. 2705X1 run on?
Makita U.S.A. lists the 2705X1 at 120V. The manual states the circuit it needs.
What blade size does the Makita U.S.A. 2705X1 take?
The Makita U.S.A. 2705X1 takes a 10" blade, by Makita U.S.A.'s specification.
How deep does the Makita U.S.A. 2705X1 cut?
Makita U.S.A. lists depth of cut for the 2705X1 as: at 90° 3-5/8"; at 45° 2-1/2".
How much does the Makita U.S.A. 2705X1 weigh?
The Makita U.S.A. 2705X1 weighs 114.7 lbs., by Makita U.S.A.'s figure.
What arbor size is the Makita U.S.A. 2705X1?
Makita U.S.A. lists the arbor of the 2705X1 as 5/8".
Where is the manual for the Makita U.S.A. 2705X1?
Makita U.S.A. publishes the 2705X1 manual on its own site; the link is under "The manual" on this page.
What does Makita U.S.A. say about status on the 2705X1?
Per Makita U.S.A.'s own pages for the 2705X1: DISCONTINUED.
What does Makita U.S.A. say about kerf width on the 2705X1?
Per Makita U.S.A.'s own pages for the 2705X1: 2.6 mm (3/32").
What does Makita U.S.A. say about no load speed on the 2705X1?
Per Makita U.S.A.'s own pages for the 2705X1: 4,800/min.
What does Makita U.S.A. say about push stick on the 2705X1?
Per Makita U.S.A.'s own pages for the 2705X1: a push stick has been provided with the tool.
What does Makita U.S.A. say about sawdust (no dust port described) on the 2705X1?
Per Makita U.S.A.'s own pages for the 2705X1: work bench the same size as the opening in the bottom of the table saw so the sawdust can drop through.
Sources
- Makita USA - Product Details -2705X1 — Makita U.S.A.
- Models 2705/2705X1 10" CONTRACTOR TABLE SAW (flyer) — Makita U.S.A.
- Makita U.S.A. 2705X1 owner's manual — Makita U.S.A.