See it at Makita U.S.A.: 2705X1
Makita U.S.A.'s own page for the 2705X1. Not a paid link.
2705X1 vs C10RJS
Makita U.S.A. 2705X1 vs Metabo HPT C10RJS. Of the 5 figures both makers publish, 2 differ: table size and weight. One is worded too differently to set side by side: depth of cut. Both are jobsite table saws with the same blade diameter, 10" in both makers' figures.
The makers' figures side by side
| Specification | Makita U.S.A. 2705X1 | Metabo HPT C10RJS |
|---|---|---|
| Current (amps) | 15.0 | 15 Amp |
| Voltage | 120V | — |
| Blade diameter | 10" | 10" |
| Arbor | 5/8" | — |
| Rip capacity | — | Right: 35"; Left: 22" |
| Depth of cut | at 90° 3-5/8"; at 45° 2-1/2" | @ 0 Degrees: 3-1/8"; @ 45 Degrees: 2-1/4" |
| Table size | 24-5/8" x 22-1/4" | 28-3/4" x 22" |
| Speed | — | 4,500 RPM |
| Dust port | — | 2-1/2" |
| Included | — | 10" 40-Tooth Carbide Tipped Table Saw Blade (371495); Blade Guard Assembly (371647); Anti-kickback Pawl Assembly (371648); Miter Gauge Assembly (371651); Push Stick (371532); Rip Fence Assembly (371649) |
| Dimensions | — | 19" x 20" x 28" |
| Weight | 114.7 lbs. | 100 lbs |
| Warranty | — | 2-Year |
Every cell is the maker's own wording, cited on the 2705X1 and C10RJS pages; the sources are listed at the end. 8 cells show a dash: the maker pages we cite do not state that figure.
Where to buy
Makita U.S.A. 2705X1
Metabo HPT C10RJS
See it at Metabo HPT: C10RJS
Metabo HPT's own page for the C10RJS. Not a paid link.
Where the 2705X1 and C10RJS figures differ
- Table size: 2705X1: 24-5/8" x 22-1/4". C10RJS: 28-3/4" x 22".
- Weight: 2705X1: 114.7 lbs. C10RJS: 100 lbs.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Depth of cut: 2705X1: at 90° 3-5/8"; at 45° 2-1/2". C10RJS: @ 0 Degrees: 3-1/8"; @ 45 Degrees: 2-1/4".
Figures cited for one of the two: only Makita U.S.A.'s cited pages give voltage and arbor; only Metabo HPT's cited pages give rip capacity, speed, dust port, included, dimensions and warranty. Ask the other maker before treating the 2705X1 and C10RJS as equal on those points.
The 2705X1 and the C10RJS in full
Makita U.S.A. 2705X1
Makita U.S.A. · jobsite table saw · blade diameter 10" · current (amps) 15.0
Metabo HPT C10RJS
Metabo HPT · jobsite table saw · blade diameter 10" · current (amps) 15 Amp · rip capacity Right: 35"; Left: 22"
Every tool we list from Makita U.S.A. and Metabo HPT.
Sources
- Makita USA - Product Details -2705X1 — Makita U.S.A.
- Models 2705/2705X1 10" CONTRACTOR TABLE SAW (flyer) — Makita U.S.A.
- Makita U.S.A. 2705X1 owner's manual — Makita U.S.A.
- 10 Inch Table Saw with Fold and Roll Stand | Metabo HPT C10RJS — Metabo HPT