See it at DEWALT: DCS361B
DEWALT's own page for the DCS361B. Not a paid link.
DEWALT DCS361B
The DEWALT DCS361B is DEWALT's 20V MAX* 7-1/4-in Sliding Miter Saw (Tool Only), listed with a 7-1/4-in blade. The figures below are DEWALT's, each linked to the page it was read from.
See it comparedWhat a miter saw is for. Bosch Power Tools writes: "A single-bevel miter saw tilts in one direction for bevel cuts, while a dual-bevel miter saw tilts in both directions, allowing you to make angled cuts without flipping the workpiece."
As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.
Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.
DCS361B specifications published by DEWALT (8)
- Motor
- Brushed20V MAX* 7-1/4-in Sliding Miter Saw (Tool Only)
- Blade diameter
- 7-1/4-in20V MAX* 7-1/4-in Sliding Miter Saw (Tool Only)
- Arbor
- 7–1/4" (184 mm) saw blades with 5/8" (16 mm) diameter round arbor holes, max kerf 2.1 mm; speed rating at least 4000 RPMDEWALT DCS361B owner's manual
- Speed
- 3750-rpm20V MAX* 7-1/4-in Sliding Miter Saw (Tool Only)
- Included
- (1) 20V MAX* Cordless 7-1/4-in (180mm) Miter Saw, (1) Blade wrench, (1) Material clamp, (1) Carbide blade20V MAX* 7-1/4-in Sliding Miter Saw (Tool Only)
- Weight
- 30.0-lbs20V MAX* 7-1/4-in Sliding Miter Saw (Tool Only)
- Warranty
- 3 Year Limited Warranty, 1 Year Free Service, 90 Days Satisfaction Guaranteed20V MAX* 7-1/4-in Sliding Miter Saw (Tool Only)
Read from DEWALT's pages on 2026-09-28. A maker can change a figure at any time, so confirm the DCS361B against DEWALT's current page before you buy.
The DCS361B manual
DEWALT publishes DEWALT's owner's manual for the DCS361B (PDF) and the parts list or diagram on its own site. The manual is where DEWALT states what the DCS361B needs and how it is set up; read it before you buy, not only after.
From the DCS361B manual and DEWALT's product page (3)
- Miter range
- 48° right and 48° leftDEWALT DCS361B owner's manual
- Bevel range
- 48° to the leftDEWALT DCS361B owner's manual
- Cut capacity at 0º miter / 0º bevel
- height 2" (50.8mm), width 8" (209.5 mm)DEWALT DCS361B owner's manual
DEWALT's own wording, row by row, with a link to the page each was read from.
Before you buy the DCS361B
- Power supply. DEWALT lists 20V for the DCS361B. DEWALT's manual gives the circuit to run it on.
Guides that cover miter saws
Questions that include the DCS361B
Compare the DCS361B with
DCS361B vs GCM18V-07SN
The DCS361B beside the Bosch GCM18V-07SN, row by row. Both are miter saws with the same blade diameter: blade diameter 7-1/4" on the GCM18V-07SN, 7-1/4-in on the DCS361B, in their makers' figures.
DCS361B vs 2733-20
The DCS361B beside the Milwaukee Tool 2733-20, row by row. Both are miter saws with the same blade diameter: blade diameter 7-1/4-in on the DCS361B, 7.25 in on the 2733-20, in their makers' figures.
You may also consider
Bosch GCM18V-07SN
Bosch · miter saw · blade diameter 7-1/4" · crosscut capacity 2-1/4" x 8-1/4"
Bosch CM10GD
Bosch · miter saw · blade diameter 10" · current (amps) 15 · crosscut capacity 3-1/8" x 12"
DEWALT DWS713
DEWALT · miter saw · blade diameter 10" (254 mm) · current (amps) 15 Amp
Other miter saws
Makita U.S.A. LS1019L
Makita U.S.A. · miter saw · blade diameter 10" · crosscut capacity 2-13/16" x 12"
Bosch GCM18V-12SDN
Bosch · miter saw · blade diameter 12" · crosscut capacity 3-1/2" x 14"
DEWALT DWS715
DEWALT · miter saw · blade diameter 12 in. · current (amps) 15A
DEWALT DWS716
DEWALT · miter saw · blade diameter 12 in. · current (amps) 15 Amp
FLEX FX7141A-Z
FLEX · miter saw · blade diameter 12 in · crosscut capacity 3.6 in x 14 in
Makita U.S.A. LS1219L
Makita U.S.A. · miter saw · blade diameter 12" · crosscut capacity 3-5/8" x 15"
DCS361B: questions answered from DEWALT's specification
What voltage does the DEWALT DCS361B run on?
DEWALT lists the DCS361B at 20V. DEWALT's manual gives the supply the DCS361B needs.
What blade size does the DEWALT DCS361B take?
The DEWALT DCS361B takes a 7-1/4-in blade, by DEWALT's specification.
How much does the DEWALT DCS361B weigh?
The DEWALT DCS361B weighs 30.0-lbs, by DEWALT's figure.
What warranty does DEWALT give on the DCS361B?
DEWALT lists warranty for the DCS361B as: 3 Year Limited Warranty, 1 Year Free Service, 90 Days Satisfaction Guaranteed.
What arbor size is the DEWALT DCS361B?
DEWALT lists arbor for the DCS361B as: 7–1/4" (184 mm) saw blades with 5/8" (16 mm) diameter round arbor holes, max kerf 2.1 mm; speed rating at least 4000 RPM.
Source: DEWALT DCS361B owner's manual
What comes with the DEWALT DCS361B?
DEWALT lists included for the DCS361B as: (1) 20V MAX* Cordless 7-1/4-in (180mm) Miter Saw, (1) Blade wrench, (1) Material clamp, (1) Carbide blade.
Where is the manual for the DEWALT DCS361B?
DEWALT publishes the DCS361B manual on its own site; the link is under "The manual" on this page.
What does DEWALT say about miter range on the DCS361B?
Per DEWALT's own pages for the DCS361B: 48° right and 48° left.
Source: DEWALT DCS361B owner's manual
What does DEWALT say about bevel range on the DCS361B?
Per DEWALT's own pages for the DCS361B: 48° to the left.
Source: DEWALT DCS361B owner's manual
What does DEWALT say about cut capacity at 0º miter / 0º bevel on the DCS361B?
Per DEWALT's own pages for the DCS361B: height 2" (50.8mm), width 8" (209.5 mm).
Source: DEWALT DCS361B owner's manual