See it at Bosch: GCM18V-07SN
Bosch's own page for the GCM18V-07SN. Not a paid link.
GCM18V-07SN vs DCS361B
Bosch GCM18V-07SN vs DEWALT DCS361B. Of the 4 figures both makers publish, 2 differ: voltage and weight. One is worded too differently to set side by side: included. Both are miter saws with the same blade diameter: blade diameter 7-1/4" on the GCM18V-07SN, 7-1/4-in on the DCS361B, in their makers' figures.
The makers' figures side by side
| Specification | Bosch GCM18V-07SN | DEWALT DCS361B |
|---|---|---|
| Motor | — | Brushed |
| Voltage | 18V | 20V |
| Blade diameter | 7-1/4" | 7-1/4-in |
| Arbor | — | 7–1/4" (184 mm) saw blades with 5/8" (16 mm) diameter round arbor holes, max kerf 2.1 mm; speed rating at least 4000 RPM |
| Bevel capacity | -2° to 47° | — |
| Miter capacity | 48° Left, 48° Right | — |
| Crosscut capacity | 2-1/4" x 8-1/4" | — |
| Speed | — | 3750-rpm |
| Included | (1) GCM18V-07S PROFACTOR 18V 7-1/4 In. Single-Bevel Slide Miter Saw, (1) 7-1/4 In. 24-Tooth Carbide-Tipped Miter Saw Blade, (1) Material Clamp, (1) Dust Bag, (1) Blade Wrench | (1) 20V MAX* Cordless 7-1/4-in (180mm) Miter Saw, (1) Blade wrench, (1) Material clamp, (1) Carbide blade |
| Weight | 26 lb | 30.0-lbs |
| Warranty | — | 3 Year Limited Warranty, 1 Year Free Service, 90 Days Satisfaction Guaranteed |
The GCM18V-07SN and DCS361B pages cite each of these figures row by row, and the sources below list where they were read. A dash (7 here) means the figure is not on the maker pages we cite.
Where to buy
Bosch GCM18V-07SN
As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.
Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.
DEWALT DCS361B
Paid links · how this works
Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.
See it at DEWALT: DCS361B
DEWALT's own page for the DCS361B. Not a paid link.
Where the GCM18V-07SN and DCS361B figures differ
- Voltage: GCM18V-07SN: 18V. DCS361B: 20V.
- Weight: GCM18V-07SN: 26 lb. DCS361B: 30.0-lbs.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Included: GCM18V-07SN: (1) GCM18V-07S PROFACTOR 18V 7-1/4 In. Single-Bevel Slide Miter Saw, (1) 7-1/4 In. 24-Tooth Carbide-Tipped Miter Saw Blade, (1) Material Clamp, (1) Dust Bag, (1) Blade Wrench. DCS361B: (1) 20V MAX* Cordless 7-1/4-in (180mm) Miter Saw, (1) Blade wrench, (1) Material clamp, (1) Carbide blade.
Where the table has one figure and a dash, only Bosch's cited pages give bevel capacity, miter capacity and crosscut capacity; only DEWALT's cited pages give motor, arbor, speed and warranty. Those rows are open questions for the other maker, not ties between the GCM18V-07SN and DCS361B.
The GCM18V-07SN and the DCS361B in full
Bosch GCM18V-07SN
Bosch · miter saw · blade diameter 7-1/4" · crosscut capacity 2-1/4" x 8-1/4"
DEWALT DCS361B
DEWALT · miter saw · blade diameter 7-1/4-in