See it at DEWALT: DCS361B
DEWALT's own page for the DCS361B. Not a paid link.
DCS361B vs 2733-20
DEWALT DCS361B vs Milwaukee Tool 2733-20. Of the 6 figures both makers publish, 1 differs: weight. 4 are worded too differently to set side by side: voltage, arbor, included and warranty. Both are miter saws with the same blade diameter: blade diameter 7-1/4-in on the DCS361B, 7.25 in on the 2733-20, in their makers' figures.
The makers' figures side by side
| Specification | DEWALT DCS361B | Milwaukee Tool 2733-20 |
|---|---|---|
| Motor | Brushed | — |
| Voltage | 20V | 18 DC |
| Blade diameter | 7-1/4-in | 7.25 in |
| Arbor | 7–1/4" (184 mm) saw blades with 5/8" (16 mm) diameter round arbor holes, max kerf 2.1 mm; speed rating at least 4000 RPM | 5/8" |
| Crosscut capacity | — | 8.3" |
| Speed | 3750-rpm | — |
| Included | (1) 20V MAX* Cordless 7-1/4-in (180mm) Miter Saw, (1) Blade wrench, (1) Material clamp, (1) Carbide blade | Blade Wrench; Carbide Tipped Blade; Clamp |
| Weight | 30.0-lbs | 26 lb |
| Warranty | 3 Year Limited Warranty, 1 Year Free Service, 90 Days Satisfaction Guaranteed | 5 Year Limited Warranty |
The DCS361B and 2733-20 pages cite each of these figures row by row, and the sources below list where they were read. Where a cell has a dash, 3 of them in this table, the maker pages we cite do not give the figure.
Where to buy
DEWALT DCS361B
As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.
Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.
Milwaukee Tool 2733-20
See it at Milwaukee Tool: 2733-20
Milwaukee Tool's own page for the 2733-20. Not a paid link.
Where the DCS361B and 2733-20 figures differ
- Weight: DCS361B: 30.0-lbs. 2733-20: 26 lb.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Voltage: DCS361B: 20V. 2733-20: 18 DC.
- Arbor: DCS361B: 7–1/4" (184 mm) saw blades with 5/8" (16 mm) diameter round arbor holes, max kerf 2.1 mm; speed rating at least 4000 RPM. 2733-20: 5/8".
- Included: DCS361B: (1) 20V MAX* Cordless 7-1/4-in (180mm) Miter Saw, (1) Blade wrench, (1) Material clamp, (1) Carbide blade. 2733-20: Blade Wrench; Carbide Tipped Blade; Clamp.
- Warranty: DCS361B: 3 Year Limited Warranty, 1 Year Free Service, 90 Days Satisfaction Guaranteed. 2733-20: 5 Year Limited Warranty.
Cited for one of the pair: only DEWALT's cited pages give motor and speed; only Milwaukee Tool's cited pages give crosscut capacity. The other maker may publish the figure elsewhere; ask it rather than assume the DCS361B and 2733-20 match there.
The DCS361B and the 2733-20 in full
DEWALT DCS361B
DEWALT · miter saw · blade diameter 7-1/4-in
Milwaukee Tool 2733-20
Milwaukee Tool · miter saw · blade diameter 7.25 in · crosscut capacity 8.3"
Every tool we list from DEWALT and Milwaukee Tool.
Sources
- 20V MAX* 7-1/4-in Sliding Miter Saw (Tool Only) — DEWALT
- DEWALT DCS361B owner's manual — DEWALT
- M18 FUEL™ 7-1/4" Dual Bevel Sliding Compound Miter Saw | Milwaukee Tool — Milwaukee Tool
- 2733-20 Operator's Manual (58-14-0083) — Milwaukee Tool