Skip to content

DEWALT DWS715

The DEWALT DWS715 is DEWALT's 12 in. 15A Single-Bevel Compound Miter Saw, listed with a 12 in. blade and 15A. DEWALT published every figure here; each one links to its source.

See it compared

What a miter saw is for. Bosch Power Tools writes: "A single-bevel miter saw tilts in one direction for bevel cuts, while a dual-bevel miter saw tilts in both directions, allowing you to make angled cuts without flipping the workpiece."

As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.

  • Available at Amazon: Amazon

    Amazon

    Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.

DWS715 specifications published by DEWALT (8)
Motor
120 Volt motor; 1600 Watts (Max. in); 15 Amp motor; 4000 RPM; automatic electric brakeDEWALT DWS715 owner's manual
Bevel capacity
0° - 48° to the left and 0°- 3° to the right12 in. 15A Single-Bevel Compound Miter Saw
Crosscut capacity
2-in X 8-in Dimensional lumber cross cut capacity at 90° and 2-in X 6-in Dimensional lumber at 45°12 in. 15A Single-Bevel Compound Miter Saw
Included
(1) 12-Inch (305mm) Carbide tipped blade; (1) Wrench; (1) Dust Bag; (1) Vertical Clamp; (1) Single Bevel Compound Miter Saw12 in. 15A Single-Bevel Compound Miter Saw

Every row is DEWALT's own wording, read on 2026-09-28. Check the current DWS715 specification on DEWALT's site before buying; makers revise their tools.

The DWS715 manual

DEWALT publishes DEWALT's owner's manual for the DWS715 (PDF) and the parts list or diagram on its own site. The DWS715 manual covers setup, adjustment and the guards, and it is worth reading before you buy as well as after.

From the DWS715 manual and DEWALT's product page (3)
Miter and bevel range
50° miter left and right; 48° bevel left: 3° rightDEWALT DWS715 owner's manual
Cut capacity at 0° miter
Max. Height 3-5/8" (92 mm) Resulting Width 6-1/4" (159 mm); Max. Width 7-7/8" (200 mm) Resulting Height 2-5/16" (59 mm)DEWALT DWS715 owner's manual
Baseboard capacity
Baseboard vertically against fence: Max. Height 5.5" (140 mm), Max. Width 1" (25 mm)DEWALT DWS715 owner's manual

Each row is our short reading of a passage on DEWALT's pages, linked to where it appears.

Compare the DWS715 with

DWS715 vs GCM12SD

The DWS715 beside the Bosch GCM12SD, row by row. Both are miter saws with the same blade diameter: blade diameter 12" on the GCM12SD, 12 in. on the DWS715, in their makers' figures.

DWS715 vs GCM18V-12GDCN

The DWS715 beside the Bosch GCM18V-12GDCN, row by row. Both are miter saws with the same blade diameter: blade diameter 12" on the GCM18V-12GDCN, 12 in. on the DWS715, in their makers' figures.

DWS715 vs GCM18V-12SDN

The DWS715 beside the Bosch GCM18V-12SDN, row by row. Both are miter saws with the same blade diameter: blade diameter 12" on the GCM18V-12SDN, 12 in. on the DWS715, in their makers' figures.

DWS715 vs DWS716

The DWS715 beside the DEWALT DWS716, row by row. The DWS715 and DWS716 are two miter saws from one maker that people search for together, compared on the maker's published figures.

DWS715 vs DWS779

The DWS715 beside the DEWALT DWS779, row by row. The DWS715 and DWS779 are two miter saws from one maker that people search for together, compared on the maker's published figures.

You may also consider

Bosch GCM18V-12SDN

Bosch · miter saw · blade diameter 12" · crosscut capacity 3-1/2" x 14"

DEWALT DWS716

DEWALT · miter saw · blade diameter 12 in. · current (amps) 15 Amp

FLEX FX7141A-Z

FLEX · miter saw · blade diameter 12 in · crosscut capacity 3.6 in x 14 in

Other miter saws

Bosch CM10GD

Bosch · miter saw · blade diameter 10" · current (amps) 15 · crosscut capacity 3-1/8" x 12"

DEWALT DWS713

DEWALT · miter saw · blade diameter 10" (254 mm) · current (amps) 15 Amp

Makita U.S.A. LS1019L

Makita U.S.A. · miter saw · blade diameter 10" · crosscut capacity 2-13/16" x 12"

Bosch GCM18V-07SN

Bosch · miter saw · blade diameter 7-1/4" · crosscut capacity 2-1/4" x 8-1/4"

DWS715: questions answered from DEWALT's specification

How many amps does the DEWALT DWS715 draw?

The DEWALT DWS715 draws 15A, by DEWALT's figure. The manual states the circuit it needs.

Source: 12 in. 15A Single-Bevel Compound Miter Saw

What blade size does the DEWALT DWS715 take?

The DEWALT DWS715 takes a 12 in. blade, by DEWALT's specification.

Source: 12 in. 15A Single-Bevel Compound Miter Saw

What arbor size is the DEWALT DWS715?

DEWALT lists the arbor of the DWS715 as 5/8 inch or 1 inch.

Source: 12 in. 15A Single-Bevel Compound Miter Saw

What comes with the DEWALT DWS715?

DEWALT lists included for the DWS715 as: (1) 12-Inch (305mm) Carbide tipped blade; (1) Wrench; (1) Dust Bag; (1) Vertical Clamp; (1) Single Bevel Compound Miter Saw.

Source: 12 in. 15A Single-Bevel Compound Miter Saw

Where is the manual for the DEWALT DWS715?

DEWALT publishes the DWS715 manual on its own site; the link is under "The manual" on this page.

Source: 12 in. 15A Single-Bevel Compound Miter Saw

What does DEWALT say about miter and bevel range on the DWS715?

Per DEWALT's own pages for the DWS715: 50° miter left and right; 48° bevel left: 3° right.

Source: DEWALT DWS715 owner's manual

What does DEWALT say about cut capacity at 0° miter on the DWS715?

Per DEWALT's own pages for the DWS715: Max. Height 3-5/8" (92 mm) Resulting Width 6-1/4" (159 mm); Max. Width 7-7/8" (200 mm) Resulting Height 2-5/16" (59 mm).

Source: DEWALT DWS715 owner's manual

What does DEWALT say about baseboard capacity on the DWS715?

Per DEWALT's own pages for the DWS715: Baseboard vertically against fence: Max. Height 5.5" (140 mm), Max. Width 1" (25 mm).

Source: DEWALT DWS715 owner's manual

Sources

  1. 12 in. 15A Single-Bevel Compound Miter Saw — DEWALT
  2. DEWALT DWS715 owner's manual — DEWALT