See it at Bosch: GCM18V-12GDCN
Bosch's own page for the GCM18V-12GDCN. Not a paid link.
GCM18V-12GDCN vs DWS715
Bosch GCM18V-12GDCN vs DEWALT DWS715. Of the 4 figures both makers publish, none differs outright. 3 are worded too differently to set side by side: bevel capacity, crosscut capacity and included. Both are miter saws with the same blade diameter: blade diameter 12" on the GCM18V-12GDCN, 12 in. on the DWS715, in their makers' figures.
The makers' figures side by side
| Specification | Bosch GCM18V-12GDCN | DEWALT DWS715 |
|---|---|---|
| Motor | — | 120 Volt motor; 1600 Watts (Max. in); 15 Amp motor; 4000 RPM; automatic electric brake |
| Current (amps) | — | 15A |
| Voltage | 18V | — |
| Blade diameter | 12" | 12 in. |
| Arbor | — | 5/8 inch or 1 inch |
| Bevel capacity | 47° left and 47° right | 0° - 48° to the left and 0°- 3° to the right |
| Miter capacity | 52° Left, 60° Right | — |
| Crosscut capacity | 3-1/2" x 13-1/2" | 2-in X 8-in Dimensional lumber cross cut capacity at 90° and 2-in X 6-in Dimensional lumber at 45° |
| Speed | — | 4,000 RPM |
| Included | (1) GCM18V-12GDC PROFACTOR 18V 12 In. Dual-Bevel Glide Miter Saw, (1) 12 In. Blade, (1) Material Clamp, (1) Wrench, (1) Dust Bag | (1) 12-Inch (305mm) Carbide tipped blade; (1) Wrench; (1) Dust Bag; (1) Vertical Clamp; (1) Single Bevel Compound Miter Saw |
| Weight | 59.3 lb | — |
The GCM18V-12GDCN and DWS715 pages cite each of these figures row by row, and the sources below list where they were read. Where a cell has a dash, 7 of them in this table, the maker pages we cite do not give the figure.
Where to buy
Bosch GCM18V-12GDCN
DEWALT DWS715
As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.
Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.
See it at DEWALT: DWS715
DEWALT's own page for the DWS715. Not a paid link.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Bevel capacity: GCM18V-12GDCN: 47° left and 47° right. DWS715: 0° - 48° to the left and 0°- 3° to the right.
- Crosscut capacity: GCM18V-12GDCN: 3-1/2" x 13-1/2". DWS715: 2-in X 8-in Dimensional lumber cross cut capacity at 90° and 2-in X 6-in Dimensional lumber at 45°.
- Included: GCM18V-12GDCN: (1) GCM18V-12GDC PROFACTOR 18V 12 In. Dual-Bevel Glide Miter Saw, (1) 12 In. Blade, (1) Material Clamp, (1) Wrench, (1) Dust Bag. DWS715: (1) 12-Inch (305mm) Carbide tipped blade; (1) Wrench; (1) Dust Bag; (1) Vertical Clamp; (1) Single Bevel Compound Miter Saw.
Cited for one of the pair: only Bosch's cited pages give voltage, miter capacity and weight; only DEWALT's cited pages give motor, current, arbor and speed. The other maker may publish the figure elsewhere; ask it rather than assume the GCM18V-12GDCN and DWS715 match there.
The GCM18V-12GDCN and the DWS715 in full
Bosch GCM18V-12GDCN
Bosch · miter saw · blade diameter 12" · crosscut capacity 3-1/2" x 13-1/2"
DEWALT DWS715
DEWALT · miter saw · blade diameter 12 in. · current (amps) 15A