GCM18V-12GDCN vs DCS781B
The GCM18V-12GDCN beside the DEWALT DCS781B, row by row. Both are miter saws with the same blade diameter: blade diameter 12" on the GCM18V-12GDCN, 12.0-in on the DCS781B, in their makers' figures.
Bosch GCM18V-12GDCN
The Bosch GCM18V-12GDCN is Bosch's PROFACTOR 18V 12 In. Dual-Bevel Glide Miter Saw (bare tool), listed with a 12" blade and a crosscut capacity of 3-1/2" x 13-1/2". Each figure below comes from Bosch's own pages, with a link to where it appears.
See it at BoschWhat a miter saw is for. Bosch Power Tools writes: "A single-bevel miter saw tilts in one direction for bevel cuts, while a dual-bevel miter saw tilts in both directions, allowing you to make angled cuts without flipping the workpiece."
GCM18V-12GDCN specifications published by Bosch (7)
- Voltage
- 18VGCM18V-12GDCN PROFACTOR 18V Miter Saws
- Blade diameter
- 12"GCM18V-12GDCN PROFACTOR 18V Miter Saws
- Bevel capacity
- 47° left and 47° rightGCM18V-12GDCN PROFACTOR 18V Miter Saws
- Miter capacity
- 52° Left, 60° RightGCM18V-12GDCN PROFACTOR 18V Miter Saws
- Crosscut capacity
- 3-1/2" x 13-1/2"GCM18V-12GDCN PROFACTOR 18V Miter Saws
- Included
- (1) GCM18V-12GDC PROFACTOR 18V 12 In. Dual-Bevel Glide Miter Saw, (1) 12 In. Blade, (1) Material Clamp, (1) Wrench, (1) Dust BagGCM18V-12GDCN PROFACTOR 18V Miter Saws
- Weight
- 59.3 lbGCM18V-12GDCN PROFACTOR 18V Miter Saws
As published by Bosch, read on 2026-09-28. Makers revise their tools; check Bosch's current specification and manual before you buy.
From the GCM18V-12GDCN manual and Bosch's product page (3)
- Vacuum hose compatibility
- VAC005 and VAC006 hoses, and most other 22 mm and 35 mm hoses, Adapters for 1-1/4 in and 1-1/2 in. Vacuum Hoses, VAC024 (VAC002 is not compatible with the GCM18V-12GDC miter saw.)GCM18V-12GDCN PROFACTOR 18V Miter Saws
- Max cut capacity 0 miter 0 bevel
- 3-1/2" x 13-1/2"GCM18V-12GDCN PROFACTOR 18V Miter Saws
- Recommended batteries
- Recommended Battery Packs to help achieve maximum tool performance, GBA18V60, GBA18V80 and GBA18V120 BatteriesGCM18V-12GDCN PROFACTOR 18V Miter Saws
Bosch's own wording, row by row, with a link to the page each was read from.
Before you buy the GCM18V-12GDCN
- Power supply. Bosch lists 18V for the GCM18V-12GDCN. Check the manual for the circuit Bosch calls for.
Guides that cover miter saws
Questions that include the GCM18V-12GDCN
Compare the GCM18V-12GDCN with
GCM18V-12GDCN vs DWS715
The GCM18V-12GDCN beside the DEWALT DWS715, row by row. Both are miter saws with the same blade diameter: blade diameter 12" on the GCM18V-12GDCN, 12 in. on the DWS715, in their makers' figures.
GCM18V-12GDCN vs DWS716
The GCM18V-12GDCN beside the DEWALT DWS716, row by row. Both are miter saws with the same blade diameter: blade diameter 12" on the GCM18V-12GDCN, 12 in. on the DWS716, in their makers' figures.
You may also consider
Bosch GCM18V-12SDN
Bosch · miter saw · blade diameter 12" · crosscut capacity 3-1/2" x 14"
DEWALT DWS715
DEWALT · miter saw · blade diameter 12 in. · current (amps) 15A
DEWALT DWS716
DEWALT · miter saw · blade diameter 12 in. · current (amps) 15 Amp
Other miter saws
FLEX FX7141A-Z
FLEX · miter saw · blade diameter 12 in · crosscut capacity 3.6 in x 14 in
Makita U.S.A. LS1219L
Makita U.S.A. · miter saw · blade diameter 12" · crosscut capacity 3-5/8" x 15"
Bosch CM10GD
Bosch · miter saw · blade diameter 10" · current (amps) 15 · crosscut capacity 3-1/8" x 12"
DEWALT DWS713
DEWALT · miter saw · blade diameter 10" (254 mm) · current (amps) 15 Amp
Makita U.S.A. LS1019L
Makita U.S.A. · miter saw · blade diameter 10" · crosscut capacity 2-13/16" x 12"
Bosch GCM18V-07SN
Bosch · miter saw · blade diameter 7-1/4" · crosscut capacity 2-1/4" x 8-1/4"
GCM18V-12GDCN: questions answered from Bosch's specification
What voltage does the Bosch GCM18V-12GDCN run on?
Bosch lists the GCM18V-12GDCN at 18V. Check the manual for the circuit Bosch requires.
What blade size does the Bosch GCM18V-12GDCN take?
The Bosch GCM18V-12GDCN takes a 12" blade, by Bosch's specification.
How much does the Bosch GCM18V-12GDCN weigh?
The Bosch GCM18V-12GDCN weighs 59.3 lb, by Bosch's figure.
What comes with the Bosch GCM18V-12GDCN?
Bosch lists included for the GCM18V-12GDCN as: (1) GCM18V-12GDC PROFACTOR 18V 12 In. Dual-Bevel Glide Miter Saw, (1) 12 In. Blade, (1) Material Clamp, (1) Wrench, (1) Dust Bag.
What does Bosch say about vacuum hose compatibility on the GCM18V-12GDCN?
Per Bosch's own pages for the GCM18V-12GDCN: VAC005 and VAC006 hoses, and most other 22 mm and 35 mm hoses, Adapters for 1-1/4 in and 1-1/2 in. Vacuum Hoses, VAC024 (VAC002 is not compatible with the GCM18V-12GDC miter saw.).
What does Bosch say about max cut capacity 0 miter 0 bevel on the GCM18V-12GDCN?
Per Bosch's own pages for the GCM18V-12GDCN: 3-1/2" x 13-1/2".
What does Bosch say about recommended batteries on the GCM18V-12GDCN?
Per Bosch's own pages for the GCM18V-12GDCN: Recommended Battery Packs to help achieve maximum tool performance, GBA18V60, GBA18V80 and GBA18V120 Batteries.