36055 vs ACSSAWUNIV
The 36055 beside the Kreg ACSSAWUNIV, row by row. Both are track saws, with a similar motor current in their makers' figures.
WEN Products 36055
The WEN Products 36055 is WEN Products' WEN 36055 9-Amp Plunge Cut Circular Track Saw with Two 27.5-Inch Tracks, listed with a 6-1/4 inch blade and 9-Amp. The figures below are WEN Products', each linked to the page it was read from.
See it at WEN ProductsWhat a track saw is for. Bosch Power Tools writes: "Bosch track and plunge saws are built for precision cutting in wood and sheet goods, delivering smooth, clean edges with minimal setup."
36055 specifications published by WEN Products (6)
- Current (amps)
- 9-AmpWEN 36055 9-Amp Plunge Cut Circular Track Saw with Two 27.5-Inch Track — WEN Products
- Blade diameter
- 6-1/4 inchWEN 36055 9-Amp Plunge Cut Circular Track Saw with Two 27.5-Inch Track — WEN Products
- Plunge depth
- 0 to 2-5/32 inchesWEN 36055 9-Amp Plunge Cut Circular Track Saw with Two 27.5-Inch Track — WEN Products
- Dust port
- 1-1/2-inchWEN 36055 9-Amp Plunge Cut Circular Track Saw with Two 27.5-Inch Track — WEN Products
- Included
- two pieces of 27.5 inch track, one track connector, a 1-1/2-inch dust port, a depth adjustment stop, one track saw stabilizerWEN 36055 9-Amp Plunge Cut Circular Track Saw with Two 27.5-Inch Track — WEN Products
Read from WEN Products' pages on 2026-09-28. A maker can change a figure at any time, so confirm the 36055 against WEN Products' current page before you buy.
Before you buy the 36055
- Dust port. WEN Products lists 1-1/2-inch; match it to your extractor or collector's hose.
Guides that cover track saws
Compare the 36055 with
36055 vs SP6000J
The 36055 beside the Makita U.S.A. SP6000J, row by row. Both are track saws with a similar motor current: motor current 12 on the SP6000J, 9-Amp on the 36055, in their makers' figures.
You may also consider
Makita U.S.A. SP6000J
Makita U.S.A. · track saw · blade diameter 6-1/2" · current (amps) 12 · depth of cut 2-3/16"
DEWALT DWS520K
DEWALT · track saw · blade diameter 6-1/2 in
Makita U.S.A. XPS01Z
Makita U.S.A. · track saw · blade diameter 6-1/2" · depth of cut 2-3/16"
Other track saws
Kreg ACSSAWUNIV
Kreg · track saw
DEWALT DCS520B
DEWALT · track saw · blade diameter 6-1/2 in.
Festool USA TS 55 FEQ-F-Plus
Festool USA · track saw · blade diameter 6-1/4" (160 mm) · depth of cut 0" - 2-1/8" (0 - 55 mm)
Festool USA TS 60 KEB-F-Plus
Festool USA · track saw · blade diameter 6-5/8" (168 mm) · depth of cut 0" - 2-7/16" (0 - 62 mm)
Festool USA 576118 (TS 75 EQ-F-Plus)
Festool USA · track saw · blade diameter 8-1/4" (210 mm) · depth of cut 0" - 3" (0 - 75 mm)
Festool USA TSC 55 KSEB-Basic
Festool USA · track saw · blade diameter 6-1/4" (160 mm) · depth of cut 0 - 2-1/8" (0 - 55 mm)
36055: questions answered from WEN Products' specification
How many amps does the WEN Products 36055 draw?
The WEN Products 36055 draws 9-Amp, by WEN Products' figure. WEN Products' manual gives the supply the 36055 needs.
Source: WEN 36055 9-Amp Plunge Cut Circular Track Saw with Two 27.5-Inch Track — WEN Products
What blade size does the WEN Products 36055 take?
The WEN Products 36055 takes a 6-1/4 inch blade, by WEN Products' specification.
Source: WEN 36055 9-Amp Plunge Cut Circular Track Saw with Two 27.5-Inch Track — WEN Products
What size is the dust port on the WEN Products 36055?
WEN Products lists the dust port on the 36055 as 1-1/2-inch.
Source: WEN 36055 9-Amp Plunge Cut Circular Track Saw with Two 27.5-Inch Track — WEN Products
What warranty does WEN Products give on the 36055?
WEN Products lists the warranty on the 36055 as: two-year.
Source: WEN 36055 9-Amp Plunge Cut Circular Track Saw with Two 27.5-Inch Track — WEN Products
What comes with the WEN Products 36055?
WEN Products lists included for the 36055 as: two pieces of 27.5 inch track, one track connector, a 1-1/2-inch dust port, a depth adjustment stop, one track saw stabilizer.
Source: WEN 36055 9-Amp Plunge Cut Circular Track Saw with Two 27.5-Inch Track — WEN Products