Buy from Kreg: ACSSAWUNIV
Kreg's own page for the ACSSAWUNIV. Not a paid link.
ACSSAWUNIV vs 36055
Kreg ACSSAWUNIV vs WEN Products 36055. Of the 2 figures both makers publish, none differs outright. 2 are worded too differently to set side by side: included and warranty. Both are track saws, with a similar motor current in their makers' figures.
The makers' figures side by side
| Specification | Kreg ACSSAWUNIV | WEN Products 36055 |
|---|---|---|
| Motor | 120-volt, 12-amp motor with a motor speed of 6000rpm | — |
| Current (amps) | — | 9-Amp |
| Blade diameter | — | 6-1/4 inch |
| Depth of cut | 2 1/8" maximum cut at 90° and 1 1/2" at 45° | — |
| Bevel capacity | -1° to 47° | — |
| Plunge depth | — | 0 to 2-5/32 inches |
| Dust port | — | 1-1/2-inch |
| Safety features (maker's list) | Electronic blade brake | — |
| Included | (1) Plunge Saw; (1) Owner's Manual | two pieces of 27.5 inch track, one track connector, a 1-1/2-inch dust port, a depth adjustment stop, one track saw stabilizer |
| Warranty | 2-year limited warranty | two-year |
| Price on the maker's site | $349.99 (kregtool.com, 28 Sep 2026) | — |
The ACSSAWUNIV and 36055 pages cite each of these figures row by row, and the sources below list where they were read. 9 cells show a dash: the maker pages we cite do not state that figure.
Where to buy
Kreg ACSSAWUNIV
WEN Products 36055
See it at WEN Products: 36055
WEN Products' own page for the 36055. Not a paid link.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Included: ACSSAWUNIV: (1) Plunge Saw; (1) Owner's Manual. 36055: two pieces of 27.5 inch track, one track connector, a 1-1/2-inch dust port, a depth adjustment stop, one track saw stabilizer.
- Warranty: ACSSAWUNIV: 2-year limited warranty. 36055: two-year.
Figures cited for one of the two: only Kreg's cited pages give motor, depth of cut, bevel capacity, safety features and price on the maker's site; only WEN Products' cited pages give current, blade diameter, plunge depth and dust port. Ask the other maker before treating the ACSSAWUNIV and 36055 as equal on those points.
The ACSSAWUNIV and the 36055 in full
Kreg ACSSAWUNIV
Kreg · track saw
WEN Products 36055
WEN Products · track saw · blade diameter 6-1/4 inch · current (amps) 9-Amp
Every tool we list from Kreg and WEN Products.