The Festool USA TS 60 KEB-F-Plus is Festool USA's Track Saw TS 60 KEB-F-Plus, listed with a 6-5/8" (168 mm) blade and a depth of cut of 0" - 2-7/16" (0 - 62 mm). The figures below are Festool USA's, each linked to the page it was read from.
See it at Festool USAWhat a track saw is for. Bosch Power Tools writes: "Bosch track and plunge saws are built for precision cutting in wood and sheet goods, delivering smooth, clean edges with minimal setup."
Read from Festool USA's pages on 2026-09-28. A maker can change a figure at any time, so confirm the TS 60 KEB-F-Plus against Festool USA's current page before you buy.
Read on Festool USA's own pages; each row links to where it is written.
The TS 60 KEB-F-Plus beside the Festool USA TS 55 FEQ-F-Plus, row by row. The TS 55 FEQ-F-Plus and TS 60 KEB-F-Plus are two track saws from one maker that people search for together, compared on the maker's published figures.
DEWALT · track saw · blade diameter 6-1/2 in
Makita U.S.A. · track saw · blade diameter 6-1/2" · current (amps) 12 · depth of cut 2-3/16"
Makita U.S.A. · track saw · blade diameter 6-1/2" · depth of cut 2-3/16"
DEWALT · track saw · blade diameter 6-1/2 in.
Festool USA · track saw · blade diameter 6-1/4" (160 mm) · depth of cut 0" - 2-1/8" (0 - 55 mm)
Festool USA · track saw · blade diameter 8-1/4" (210 mm) · depth of cut 0" - 3" (0 - 75 mm)
Festool USA · track saw · blade diameter 6-1/4" (160 mm) · depth of cut 0 - 2-1/8" (0 - 55 mm)
Kreg · track saw
Makita U.S.A. · track saw · blade diameter 6-1/2" · depth of cut 2-3/16"
Festool USA lists the TS 60 KEB-F-Plus at 120 VAC. Check the manual for the circuit Festool USA requires.
Source: Track Saw TS 60 KEB-F-Plus
The Festool USA TS 60 KEB-F-Plus takes a 6-5/8" (168 mm) blade, by Festool USA's specification.
Source: Track Saw TS 60 KEB-F-Plus
Festool USA lists the depth of cut of the TS 60 KEB-F-Plus as 0" - 2-7/16" (0 - 62 mm).
Source: Track Saw TS 60 KEB-F-Plus
Festool USA lists the dust port on the TS 60 KEB-F-Plus as 1-1/16"/1-7/16" (27/36 mm).
Source: Track Saw TS 60 KEB-F-Plus
Festool USA lists included for the TS 60 KEB-F-Plus as: Saw Blade WOOD FINE CUT HW 168x1,8x20 WD42; sight window; splinterguard; hex key 5 mm; Systainer³ SYS3 M 337.
Source: Track Saw TS 60 KEB-F-Plus
Per Festool USA's own pages for the TS 60 KEB-F-Plus: Max. cutting depth 45° 1-3/4" (45 mm); Saw blade diameter 6-5/8" (168 mm).
Source: Track Saw TS 60 KEB-F-Plus
Per Festool USA's own pages for the TS 60 KEB-F-Plus: Cutting depth 0" - 2-7/16” (0 - 62 mm).
Source: Track Saw TS 60 KEB-F-Plus