2734-20 vs C10FCGS
The 2734-20 beside the Metabo HPT C10FCGS, row by row. Both are miter saws with the same blade diameter: blade diameter 10" on the C10FCGS, 10 in on the 2734-20, in their makers' figures.
Milwaukee Tool 2734-20
The Milwaukee Tool 2734-20 is Milwaukee Tool's M18 FUEL 10" Dual Bevel Sliding Compound Miter Saw, listed with a 10 in blade and a crosscut capacity of 11.39" W at 3.59" H. The figures below are Milwaukee Tool's, each linked to the page it was read from.
See it at Milwaukee ToolWhat a miter saw is for. Bosch Power Tools writes: "A single-bevel miter saw tilts in one direction for bevel cuts, while a dual-bevel miter saw tilts in both directions, allowing you to make angled cuts without flipping the workpiece."
2734-20 specifications published by Milwaukee Tool (6)
- Voltage
- 18 DC2734-20 Operator's Manual (58-14-0004)
- Blade diameter
- 10 inM18 FUEL™ 10" Dual Bevel Sliding Compound Miter Saw | Milwaukee Tool
- Crosscut capacity
- 11.39" W at 3.59" H2734-20 Operator's Manual (58-14-0004)
- Warranty
- 5 Year Limited WarrantyM18 FUEL™ 10" Dual Bevel Sliding Compound Miter Saw | Milwaukee Tool
Read from Milwaukee Tool's pages on 2026-09-28. A maker can change a figure at any time, so confirm the 2734-20 against Milwaukee Tool's current page before you buy.
The 2734-20 manual
Milwaukee Tool publishes Milwaukee Tool's owner's manual for the 2734-20 (PDF) and the parts list or diagram (PDF) on its own site. The manual is where Milwaukee Tool states what the 2734-20 needs and how it is set up; read it before you buy, not only after.
From the 2734-20 manual and Milwaukee Tool's product page (1)
- dust collection
- dust port at the back of the saw connects to a standard workshop vacuum hose or the included dust bag2734-20 Operator's Manual (58-14-0004)
Milwaukee Tool's own wording, row by row, with a link to the page each was read from.
Before you buy the 2734-20
- Power supply. Milwaukee Tool lists 18 DC for the 2734-20. Milwaukee Tool's manual gives the circuit to run it on.
Guides that cover miter saws
Questions that include the 2734-20
Compare the 2734-20 with
You may also consider
Bosch CM10GD
Bosch · miter saw · blade diameter 10" · current (amps) 15 · crosscut capacity 3-1/8" x 12"
DEWALT DWS713
DEWALT · miter saw · blade diameter 10" (254 mm) · current (amps) 15 Amp
Makita U.S.A. LS1019L
Makita U.S.A. · miter saw · blade diameter 10" · crosscut capacity 2-13/16" x 12"
Other miter saws
Bosch GCM18V-12SDN
Bosch · miter saw · blade diameter 12" · crosscut capacity 3-1/2" x 14"
DEWALT DWS715
DEWALT · miter saw · blade diameter 12 in. · current (amps) 15A
DEWALT DWS716
DEWALT · miter saw · blade diameter 12 in. · current (amps) 15 Amp
FLEX FX7141A-Z
FLEX · miter saw · blade diameter 12 in · crosscut capacity 3.6 in x 14 in
Makita U.S.A. LS1219L
Makita U.S.A. · miter saw · blade diameter 12" · crosscut capacity 3-5/8" x 15"
Bosch GCM18V-07SN
Bosch · miter saw · blade diameter 7-1/4" · crosscut capacity 2-1/4" x 8-1/4"
2734-20: questions answered from Milwaukee Tool's specification
What voltage does the Milwaukee Tool 2734-20 run on?
Milwaukee Tool lists the 2734-20 at 18 DC. Check the manual for the circuit Milwaukee Tool requires.
What blade size does the Milwaukee Tool 2734-20 take?
The Milwaukee Tool 2734-20 takes a 10 in blade, by Milwaukee Tool's specification.
Source: M18 FUEL™ 10" Dual Bevel Sliding Compound Miter Saw | Milwaukee Tool
How much does the Milwaukee Tool 2734-20 weigh?
The Milwaukee Tool 2734-20 weighs 45 lb, by Milwaukee Tool's figure.
Source: M18 FUEL™ 10" Dual Bevel Sliding Compound Miter Saw | Milwaukee Tool
What warranty does Milwaukee Tool give on the 2734-20?
Milwaukee Tool lists the warranty on the 2734-20 as: 5 Year Limited Warranty.
Source: M18 FUEL™ 10" Dual Bevel Sliding Compound Miter Saw | Milwaukee Tool
What arbor size is the Milwaukee Tool 2734-20?
Milwaukee Tool lists the arbor of the 2734-20 as 5/8".
Where is the manual for the Milwaukee Tool 2734-20?
Milwaukee Tool publishes the 2734-20 manual on its own site; the link is under "The manual" on this page.
What does Milwaukee Tool say about dust collection on the 2734-20?
Per Milwaukee Tool's own pages for the 2734-20: dust port at the back of the saw connects to a standard workshop vacuum hose or the included dust bag.
Sources
- M18 FUEL™ 10" Dual Bevel Sliding Compound Miter Saw | Milwaukee Tool — Milwaukee Tool
- 2734-20 Operator's Manual (58-14-0004) — Milwaukee Tool