See it at Metabo HPT: C10FCGS
Metabo HPT's own page for the C10FCGS. Not a paid link.
C10FCGS vs 2734-20
Metabo HPT C10FCGS vs Milwaukee Tool 2734-20. Of the 5 figures both makers publish, 1 differs: weight. One is worded too differently to set side by side: voltage. Both are miter saws with the same blade diameter: blade diameter 10" on the C10FCGS, 10 in on the 2734-20, in their makers' figures.
The makers' figures side by side
| Specification | Metabo HPT C10FCGS | Milwaukee Tool 2734-20 |
|---|---|---|
| Motor | AC single phase commutator series motor | — |
| Current (amps) | 15 A | — |
| Voltage | AC single phase 60 Hz, 120 V | 18 DC |
| Blade diameter | 10" | 10 in |
| Arbor | 5/8" | 5/8" |
| Bevel capacity | Left 0-45 degrees | — |
| Miter capacity | L/R 0-52 degrees | — |
| Crosscut capacity | — | 11.39" W at 3.59" H |
| Speed | 5,000/min | — |
| Included | 10" 24T TCT Saw Blade; Dust Bag (322955M); Vise Assembly (322952); Hex. Bar Wrench (5mm); Holder | — |
| Dimensions | 18-1/2" x 23" x 21-1/2" | — |
| Weight | 24.2 lbs | 45 lb |
| Cord length | 6ft. in length | — |
| Warranty | 5-Year | 5 Year Limited Warranty |
Each figure is the maker's own, as cited row by row on the C10FCGS and 2734-20 pages and listed in the sources below. Where a cell has a dash, 9 of them in this table, the maker pages we cite do not give the figure.
Where to buy
Metabo HPT C10FCGS
Milwaukee Tool 2734-20
See it at Milwaukee Tool: 2734-20
Milwaukee Tool's own page for the 2734-20. Not a paid link.
Where the C10FCGS and 2734-20 figures differ
- Weight: C10FCGS: 24.2 lbs. 2734-20: 45 lb.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Voltage: C10FCGS: AC single phase 60 Hz, 120 V. 2734-20: 18 DC.
Cited for one of the pair: only Metabo HPT's cited pages give motor, current, bevel capacity, miter capacity, speed, included, dimensions and cord length; only Milwaukee Tool's cited pages give crosscut capacity. The other maker may publish the figure elsewhere; ask it rather than assume the C10FCGS and 2734-20 match there.
The C10FCGS and the 2734-20 in full
Metabo HPT C10FCGS
Metabo HPT · miter saw · blade diameter 10" · current (amps) 15 A
Milwaukee Tool 2734-20
Milwaukee Tool · miter saw · blade diameter 10 in · crosscut capacity 11.39" W at 3.59" H
Every tool we list from Metabo HPT and Milwaukee Tool.
Sources
- 10 Inch Compound Miter Saw | Metabo HPT C10FCGS — Metabo HPT
- Metabo HPT C10FCGS owner's manual — Metabo HPT
- M18 FUEL™ 10" Dual Bevel Sliding Compound Miter Saw | Milwaukee Tool — Milwaukee Tool
- 2734-20 Operator's Manual (58-14-0004) — Milwaukee Tool