Skip to content
Menu

DELTA Machinery 36-5152T2

The DELTA Machinery 36-5152T2 is DELTA Machinery's 10 in. Contractor Table Saw (52 in. rip). The figures below are DELTA Machinery's, each linked to the page it was read from.

See it at DELTA Machinery

What a table saw is for. On cabinet saws, WEN Products writes: "They usually come with fully-enclosed heavy-duty metal cabinet stands (hence the name), large cast iron tables with extremely large extensions, heavy-duty motors, and very-high-quality accessories."

36-5152T2 specifications published by DELTA Machinery (11)
Motor
15 Amp Induction Motor, 1 PH, 60 Hz36-5152T2 | 10 in. Contractor Table Saw - Delta Machinery
Arbor
5/8 in. (15.88 mm)36-5152T2 | 10 in. Contractor Table Saw - Delta Machinery
Rip capacity
Rip Right of Blade: 52 in. (1320.8 mm); Rip Left of Blade: 15 in. (381 mm)36-5152T2 | 10 in. Contractor Table Saw - Delta Machinery
Depth of cut
at 90º: 3-1/8 in. (79.36 mm); at 45º: 2-1/4 in. (57.2 mm)36-5152T2 | 10 in. Contractor Table Saw - Delta Machinery
Bevel capacity
45º Left36-5152T2 | 10 in. Contractor Table Saw - Delta Machinery
Table size
20 in. X 27 in. (40 in. X 27 in. with WINGS and 76.5 in. wide with extension board)36-5152T2 | 10 in. Contractor Table Saw - Delta Machinery
Speed
3450 RPM36-5152T2 | 10 in. Contractor Table Saw - Delta Machinery
Dust port
Fit 2.5 in. (63.5 mm) Hose (With 4 in. (102 mm) ADAPTER)36-5152T2 | 10 in. Contractor Table Saw - Delta Machinery
Dimensions
Length: 84.75 in. (2,152.65 mm); Depth: 40.16 in. (1,020 mm); Height: 42.91 in. (1,089.91 mm)36-5152T2 | 10 in. Contractor Table Saw - Delta Machinery
Weight
269 lbs. Net (122 kg)36-5152T2 | 10 in. Contractor Table Saw - Delta Machinery
Warranty
5 Year Warranty36-5152T2 | 10 in. Contractor Table Saw - Delta Machinery

Read from DELTA Machinery's pages on 2026-09-28. A maker can change a figure at any time, so confirm the 36-5152T2 against DELTA Machinery's current page before you buy.

The 36-5152T2 manual

DELTA Machinery publishes DELTA Machinery's owner's manual for the 36-5152T2 (PDF) and the parts list or diagram (PDF) on its own site. The manual is where DELTA Machinery states what the 36-5152T2 needs and how it is set up; read it before you buy, not only after.

From the 36-5152T2 manual and DELTA Machinery's product page (3)
Dado blades
13/16 in. (20.64 mm) X 8 in. (203 mm) stacked dado36-5152T2 | 10 in. Contractor Table Saw - Delta Machinery
Rip capacity
Rip Right of Blade: 52 in. (1320.8 mm); Rip Left of Blade: 15 in. (381 mm)36-5152T2 | 10 in. Contractor Table Saw - Delta Machinery
Motor
Motor: 15 Amp Induction Motor, 1 PH, 60 Hz; RPM : 3450 RPM36-5152T2 | 10 in. Contractor Table Saw - Delta Machinery

DELTA Machinery's own wording, row by row, with a link to the page each was read from.

Before you buy the 36-5152T2

  • Dust port. DELTA Machinery lists Fit 2.5 in. (63.5 mm) Hose (With 4 in. (102 mm) ADAPTER); that is the size your collector's hose or adapter has to meet.

Guides that cover table saws

Questions that include the 36-5152T2

Compare the 36-5152T2 with

36-5152T2 vs 36-5000T2

The 36-5152T2 beside the DELTA Machinery 36-5000T2, row by row. Both are table saws, compared on the 11 figures published for both.

Other table saws

JET JPS-10-30C

JET · table saw · blade diameter 10 in. · horsepower 1.75 HP · rip capacity 30 in.

36-5152T2: questions answered from DELTA Machinery's specification

What is the rip capacity of the DELTA Machinery 36-5152T2?

DELTA Machinery lists rip capacity for the 36-5152T2 as: Rip Right of Blade: 52 in. (1320.8 mm); Rip Left of Blade: 15 in. (381 mm).

Source: 36-5152T2 | 10 in. Contractor Table Saw - Delta Machinery

How deep does the DELTA Machinery 36-5152T2 cut?

DELTA Machinery lists depth of cut for the 36-5152T2 as: at 90º: 3-1/8 in. (79.36 mm); at 45º: 2-1/4 in. (57.2 mm).

Source: 36-5152T2 | 10 in. Contractor Table Saw - Delta Machinery

What size is the dust port on the DELTA Machinery 36-5152T2?

DELTA Machinery lists the dust port on the 36-5152T2 as Fit 2.5 in. (63.5 mm) Hose (With 4 in. (102 mm) ADAPTER).

Source: 36-5152T2 | 10 in. Contractor Table Saw - Delta Machinery

How much does the DELTA Machinery 36-5152T2 weigh?

The DELTA Machinery 36-5152T2 weighs 269 lbs. Net (122 kg), by DELTA Machinery's figure.

Source: 36-5152T2 | 10 in. Contractor Table Saw - Delta Machinery

What warranty does DELTA Machinery give on the 36-5152T2?

DELTA Machinery lists the warranty on the 36-5152T2 as: 5 Year Warranty.

Source: 36-5152T2 | 10 in. Contractor Table Saw - Delta Machinery

What arbor size is the DELTA Machinery 36-5152T2?

DELTA Machinery lists the arbor of the 36-5152T2 as 5/8 in. (15.88 mm).

Source: 36-5152T2 | 10 in. Contractor Table Saw - Delta Machinery

Where is the manual for the DELTA Machinery 36-5152T2?

DELTA Machinery publishes the 36-5152T2 manual on its own site; the link is under "The manual" on this page.

Source: DELTA Machinery 36-5152T2 product page

What does DELTA Machinery say about dado blades on the 36-5152T2?

Per DELTA Machinery's own pages for the 36-5152T2: 13/16 in. (20.64 mm) X 8 in. (203 mm) stacked dado.

Source: 36-5152T2 | 10 in. Contractor Table Saw - Delta Machinery

What does DELTA Machinery say about rip capacity on the 36-5152T2?

Per DELTA Machinery's own pages for the 36-5152T2: Rip Right of Blade: 52 in. (1320.8 mm); Rip Left of Blade: 15 in. (381 mm).

Source: 36-5152T2 | 10 in. Contractor Table Saw - Delta Machinery

What does DELTA Machinery say about motor on the 36-5152T2?

Per DELTA Machinery's own pages for the 36-5152T2: Motor: 15 Amp Induction Motor, 1 PH, 60 Hz; RPM : 3450 RPM.

Source: 36-5152T2 | 10 in. Contractor Table Saw - Delta Machinery

Every DELTA Machinery tool on Taikra · All table saws compared

Sources

  1. 36-5152T2 | 10 in. Contractor Table Saw - Delta Machinery — DELTA Machinery
  2. DELTA Machinery 36-5152T2 product page — DELTA Machinery