JET JBOS-5
JET · spindle sander
WEN Products 6510T
The WEN Products 6510T is WEN Products' WEN 6510T 3.5 Amp Oscillating Spindle Sander, listed with a speed of 2000 RPM (no load). Every figure on this page is WEN Products' own and links to where WEN Products published it.
See it at WEN Products6510T specifications published by WEN Products (5)
- Speed
- 2000 RPM (no load)WEN Products 6510T owner's manual
- Dust port
- 1.5-inch dust hose (fits over the dust port)WEN Products 6510T owner's manual
- Included
- six 80-Grit sanding sleeve sizes for a variety of curvatures: 1/2 in., 3/4, in., 1 in., 1-1/2 in., 2 in., 3 in.WEN 6510T 3.5 Amp Oscillating Spindle Sander - WEN Products
- Warranty
- two-year warrantyWEN 6510T 3.5 Amp Oscillating Spindle Sander - WEN Products
WEN Products' figures for the 6510T, read on 2026-09-28. WEN Products may have revised them since; the current specification and manual are on its site.
The 6510T manual
WEN Products publishes WEN Products' owner's manual for the 6510T (PDF) on its own site. Setup, capacities and safety requirements for the 6510T are in the manual; it is the document to read before buying.
From the 6510T manual and WEN Products' product page (1)
- Amp draw
- 3.5AWEN Products 6510T owner's manual
Read on WEN Products' own pages; each row links to where it is written.
Before you buy the 6510T
- Dust port. WEN Products lists 1.5-inch dust hose (fits over the dust port); check it against the hose on your extractor or collector.
Guides that cover spindle sanders
Other spindle sanders
6510T: questions answered from WEN Products' specification
What size is the dust port on the WEN Products 6510T?
WEN Products lists the dust port on the 6510T as 1.5-inch dust hose (fits over the dust port).
What warranty does WEN Products give on the 6510T?
WEN Products lists the warranty on the 6510T as: two-year warranty.
Source: WEN 6510T 3.5 Amp Oscillating Spindle Sander - WEN Products
What comes with the WEN Products 6510T?
WEN Products lists included for the 6510T as: six 80-Grit sanding sleeve sizes for a variety of curvatures: 1/2 in., 3/4, in., 1 in., 1-1/2 in., 2 in., 3 in.
Source: WEN 6510T 3.5 Amp Oscillating Spindle Sander - WEN Products
Where is the manual for the WEN Products 6510T?
WEN Products publishes the 6510T manual on its own site; the link is under "The manual" on this page.
What does WEN Products say about amp draw on the 6510T?
Per WEN Products' own pages for the 6510T: 3.5A.
Sources
- WEN 6510T 3.5 Amp Oscillating Spindle Sander - WEN Products — WEN Products
- WEN Products 6510T owner's manual — WEN Products