C12RSH3 vs DWS780
The C12RSH3 beside the DEWALT DWS780, row by row. The DWS780 and C12RSH3 are miter saws people search for together, compared on their makers' published figures.
Metabo HPT C12RSH3
The Metabo HPT C12RSH3 is Metabo HPT's 12" Dual Bevel Sliding Miter Saw, listed with a 12" blade and 15A. Each figure below comes from Metabo HPT's own pages, with a link to where it appears.
See it at Metabo HPTWhat a miter saw is for. Bosch Power Tools writes: "A single-bevel miter saw tilts in one direction for bevel cuts, while a dual-bevel miter saw tilts in both directions, allowing you to make angled cuts without flipping the workpiece."
C12RSH3 specifications published by Metabo HPT (12)
- Motor
- Series Commutator Motor12" Dual Bevel Sliding Miter Saw | Metabo HPT C12RSH3
- Current (amps)
- 15A12" Dual Bevel Sliding Miter Saw | Metabo HPT C12RSH3
- Blade diameter
- 12"12" Dual Bevel Sliding Miter Saw | Metabo HPT C12RSH3
- Bevel capacity
- Left: 0° - 45°; Right: 0° - 45°12" Dual Bevel Sliding Miter Saw | Metabo HPT C12RSH3
- Miter capacity
- Left: 0° - 45°; Right: 0° - 57°12" Dual Bevel Sliding Miter Saw | Metabo HPT C12RSH3
- Speed
- 4,000/min RPM12" Dual Bevel Sliding Miter Saw | Metabo HPT C12RSH3
- Dust port
- hose (id 38 mm x 3 m long) and adapter, joint (C) and dust collection adapter with the duct of power toolMetabo HPT C12RSH3 owner's manual
- Included
- 12" TCT Saw Blade (for wood) (323522); Dust Bag (322955); Vise Assembly (339624); 8 mm Hex. Bar Wrench (955857); Holder (376730); Side Holder (380332)12" Dual Bevel Sliding Miter Saw | Metabo HPT C12RSH3
- Weight
- 54.9 lbs12" Dual Bevel Sliding Miter Saw | Metabo HPT C12RSH3
- Cord length
- 2 Conductor type cable 6ft.12" Dual Bevel Sliding Miter Saw | Metabo HPT C12RSH3
- Warranty
- 5 years12" Dual Bevel Sliding Miter Saw | Metabo HPT C12RSH3
As published by Metabo HPT, read on 2026-09-28. Makers revise their tools; check Metabo HPT's current specification and manual before you buy.
The C12RSH3 manual
Metabo HPT publishes Metabo HPT's owner's manual for the C12RSH3 (PDF) and the parts list or diagram (PDF) on its own site. Read it before you buy as well as after: it is where Metabo HPT states the C12RSH3 requirements in full.
From the C12RSH3 manual and Metabo HPT's product page (5)
- Applicable saw blade
- Outside Dia. 12" (305 mm), Hole Dia. 1" (25.4 mm), Maximum kerf 7/64" (2.8 mm)Metabo HPT C12RSH3 owner's manual
- No-load speed
- 4,000 /minMetabo HPT C12RSH3 owner's manual
- Max cut at 0/0
- Max. height 4-3/16" (107 mm), Max. width 12-1/4" (312 mm)Metabo HPT C12RSH3 owner's manual
- Weight
- 54.9 lbs. (24.9 kg)Metabo HPT C12RSH3 owner's manual
- Weight
- Joint (C) (Code No. 337526)Metabo HPT C12RSH3 owner's manual
Each row is our short reading of a passage on Metabo HPT's pages, linked to where it appears.
Before you buy the C12RSH3
- Power supply. Metabo HPT lists 120 V and 15A for the C12RSH3. The manual says what circuit the C12RSH3 needs.
- Dust port. Metabo HPT lists hose (id 38 mm x 3 m long) and adapter, joint (C) and dust collection adapter with the duct of power tool; check it against the hose on your extractor or collector.
Guides that cover miter saws
Questions that include the C12RSH3
Compare the C12RSH3 with
C12RSH3 vs LS1219L
The C12RSH3 beside the Makita U.S.A. LS1219L, row by row. Both are miter saws with the same blade diameter, 12" in both makers' figures.
C12RSH3 vs XSL07Z
The C12RSH3 beside the Makita U.S.A. XSL07Z, row by row. Both are miter saws with the same blade diameter: blade diameter 305 mm (12") on the XSL07Z, 12" on the C12RSH3, in their makers' figures.
C12RSH3 vs XSL08Z
The C12RSH3 beside the Makita U.S.A. XSL08Z, row by row. Both are miter saws with the same blade diameter: blade diameter 305 mm (12") on the XSL08Z, 12" on the C12RSH3, in their makers' figures.
You may also consider
Bosch GCM18V-12SDN
Bosch · miter saw · blade diameter 12" · crosscut capacity 3-1/2" x 14"
DEWALT DWS715
DEWALT · miter saw · blade diameter 12 in. · current (amps) 15A
DEWALT DWS716
DEWALT · miter saw · blade diameter 12 in. · current (amps) 15 Amp
Other miter saws
FLEX FX7141A-Z
FLEX · miter saw · blade diameter 12 in · crosscut capacity 3.6 in x 14 in
Makita U.S.A. LS1219L
Makita U.S.A. · miter saw · blade diameter 12" · crosscut capacity 3-5/8" x 15"
Bosch CM10GD
Bosch · miter saw · blade diameter 10" · current (amps) 15 · crosscut capacity 3-1/8" x 12"
DEWALT DWS713
DEWALT · miter saw · blade diameter 10" (254 mm) · current (amps) 15 Amp
Makita U.S.A. LS1019L
Makita U.S.A. · miter saw · blade diameter 10" · crosscut capacity 2-13/16" x 12"
Bosch GCM18V-07SN
Bosch · miter saw · blade diameter 7-1/4" · crosscut capacity 2-1/4" x 8-1/4"
C12RSH3: questions answered from Metabo HPT's specification
How many amps does the Metabo HPT C12RSH3 draw?
The Metabo HPT C12RSH3 draws 15A, by Metabo HPT's figure. The manual states the circuit it needs.
Source: 12" Dual Bevel Sliding Miter Saw | Metabo HPT C12RSH3
What voltage does the Metabo HPT C12RSH3 run on?
Metabo HPT lists the C12RSH3 at 120 V. The manual states the circuit it needs.
Source: 12" Dual Bevel Sliding Miter Saw | Metabo HPT C12RSH3
What blade size does the Metabo HPT C12RSH3 take?
The Metabo HPT C12RSH3 takes a 12" blade, by Metabo HPT's specification.
Source: 12" Dual Bevel Sliding Miter Saw | Metabo HPT C12RSH3
What size is the dust port on the Metabo HPT C12RSH3?
Metabo HPT lists dust port for the C12RSH3 as: hose (id 38 mm x 3 m long) and adapter, joint (C) and dust collection adapter with the duct of power tool.
How much does the Metabo HPT C12RSH3 weigh?
The Metabo HPT C12RSH3 weighs 54.9 lbs, by Metabo HPT's figure.
Source: 12" Dual Bevel Sliding Miter Saw | Metabo HPT C12RSH3
What warranty does Metabo HPT give on the C12RSH3?
Metabo HPT lists the warranty on the C12RSH3 as: 5 years.
Source: 12" Dual Bevel Sliding Miter Saw | Metabo HPT C12RSH3
What comes with the Metabo HPT C12RSH3?
Metabo HPT lists included for the C12RSH3 as: 12" TCT Saw Blade (for wood) (323522); Dust Bag (322955); Vise Assembly (339624); 8 mm Hex. Bar Wrench (955857); Holder (376730); Side Holder (380332).
Source: 12" Dual Bevel Sliding Miter Saw | Metabo HPT C12RSH3
Where is the manual for the Metabo HPT C12RSH3?
Metabo HPT publishes the C12RSH3 manual on its own site; the link is under "The manual" on this page.
Source: 12" Dual Bevel Sliding Miter Saw | Metabo HPT C12RSH3
What does Metabo HPT say about applicable saw blade on the C12RSH3?
Per Metabo HPT's own pages for the C12RSH3: Outside Dia. 12" (305 mm), Hole Dia. 1" (25.4 mm), Maximum kerf 7/64" (2.8 mm).
What does Metabo HPT say about no-load speed on the C12RSH3?
Per Metabo HPT's own pages for the C12RSH3: 4,000 /min.
What does Metabo HPT say about max cut at 0/0 on the C12RSH3?
Per Metabo HPT's own pages for the C12RSH3: Max. height 4-3/16" (107 mm), Max. width 12-1/4" (312 mm).
What does Metabo HPT say about weight on the C12RSH3?
Per Metabo HPT's own pages for the C12RSH3: 54.9 lbs. (24.9 kg). Joint (C) (Code No. 337526).
Sources
- 12" Dual Bevel Sliding Miter Saw | Metabo HPT C12RSH3 — Metabo HPT
- Metabo HPT C12RSH3 owner's manual — Metabo HPT