JET JWDS-1632OSC

The JET JWDS-1632OSC is JET's Oscillating Drum Sander w/ Stand, 1.5HP, 115V 1PH, listed with a cutting width of 16 in. (406 mm), 1-1/2 HP and a maximum stock thickness of 3 in. (76.2 mm). The figures below are JET's, each linked to the page it was read from.

See it compared

What a drum sander is for. On drum sanders, WEN Products writes: "They operate similarly to a thickness planer; instead of blades, however, they're equipped with a strip of sandpaper wrapped around a drum to sand a workpiece down to an exact thickness and get an excellent finish."

As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.

Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.

See it at JET: JWDS-1632OSC

JET's own page for the JWDS-1632OSC. Not a paid link.

JWDS-1632OSC specifications published by JET (16)

Motor: totally enclosed fan cooled, induction, capacitor startOperating Instructions and Parts Manual JWDS-1632OSC Drum Sander
Horsepower: 1-1/2 HPOperating Instructions and Parts Manual JWDS-1632OSC Drum Sander
Current (amps): 14 AOperating Instructions and Parts Manual JWDS-1632OSC Drum Sander
Voltage: 115V onlyOperating Instructions and Parts Manual JWDS-1632OSC Drum Sander
Phase: singleOperating Instructions and Parts Manual JWDS-1632OSC Drum Sander
Cutting width: 16 in. (406 mm)Operating Instructions and Parts Manual JWDS-1632OSC Drum Sander
Maximum stock thickness: 3 in. (76.2 mm)Operating Instructions and Parts Manual JWDS-1632OSC Drum Sander
Minimum stock thickness: 1/32 in. (0.8 mm)Operating Instructions and Parts Manual JWDS-1632OSC Drum Sander
Feed rate: infinitely variable within 0 to 10 FPM (0-3 MPM)Operating Instructions and Parts Manual JWDS-1632OSC Drum Sander
Speed: 1725 RPMOperating Instructions and Parts Manual JWDS-1632OSC Drum Sander
Sanding drum or spindle: dia. 5 in. x 16L (127 x 406 mm)Operating Instructions and Parts Manual JWDS-1632OSC Drum Sander
Abrasive: 80 gritOperating Instructions and Parts Manual JWDS-1632OSC Drum Sander
Noise level: 63 dB at 100cm; 66 dB at 50cmOperating Instructions and Parts Manual JWDS-1632OSC Drum Sander
Dust port: 4 in. (100mm)Operating Instructions and Parts Manual JWDS-1632OSC Drum Sander
Dimensions: 42-13/16 x 20-5/16 x 49-1/8 in. (1088 x 516 x 1248 mm)Operating Instructions and Parts Manual JWDS-1632OSC Drum Sander
Weight: 191 lb. (86.7 kg)Operating Instructions and Parts Manual JWDS-1632OSC Drum Sander

Read from JET's pages on 2026-09-28. A maker can change a figure at any time, so confirm the JWDS-1632OSC against JET's current page before you buy.

The JWDS-1632OSC manual

JET publishes JET's owner's manual for the JWDS-1632OSC (PDF) and the parts list or diagram (PDF) on its own site. The manual is where JET states what the JWDS-1632OSC needs and how it is set up; read it before you buy, not only after.

From the JWDS-1632OSC manual and JET's product page (3)

Minimum dust extraction: 400 CFM (11.3 CMM)Operating Instructions and Parts Manual JWDS-1632OSC Drum Sander
Oscillation: Singel speed, 120 strokes per Minute; 1/2" (12.7mm) strokeOperating Instructions and Parts Manual JWDS-1632OSC Drum Sander
Capacity: 16 in. (406 mm) single pass; 32 in. (812 mm) two passes; 3 in. thicknessOperating Instructions and Parts Manual JWDS-1632OSC Drum Sander

Each row is our short reading of a passage on JET's pages, linked to where it appears.

Before you buy the JWDS-1632OSC

Power supply. JET lists 115V only and 14 A for the JWDS-1632OSC. The manual says what circuit the JWDS-1632OSC needs.
Dust port. JET lists 4 in. (100mm); match it to your extractor or collector's hose.

Guides that cover drum sanders

Compare the JWDS-1632OSC with

JWDS-1632OSC vs JWDS-1632

The JWDS-1632OSC beside the JET JWDS-1632, row by row. The JWDS-1632 and JWDS-1632OSC are two drum sanders from one maker that people search for together, compared on the maker's published figures.