Skip to content

DELTA Machinery 18-900L

The DELTA Machinery 18-900L is DELTA Machinery's 18 in. Laser Drill Press, listed with 3/4 HP and a spindle travel of 6 in. The figures below are DELTA Machinery's, each linked to the page it was read from.

See it at DELTA Machinery

18-900L specifications published by DELTA Machinery (6)

Horsepower: 3/4 HP18-900L | 18 in. Laser Drill Press - Delta Machinery
Table size: 20 in. x 14 in.18-900L | 18 in. Laser Drill Press - Delta Machinery
Speed: 16 (170-3000 RPM)18-900L | 18 in. Laser Drill Press - Delta Machinery
Spindle travel: 6 in.18-900L | 18 in. Laser Drill Press - Delta Machinery
Weight: 240 lbs.18-900L | 18 in. Laser Drill Press - Delta Machinery
Warranty: 5 Year Warranty18-900L | 18 in. Laser Drill Press - Delta Machinery

Read from DELTA Machinery's pages on 2026-09-28. A maker can change a figure at any time, so confirm the 18-900L against DELTA Machinery's current page before you buy.

The 18-900L manual

DELTA Machinery publishes DELTA Machinery's owner's manual for the 18-900L (PDF) and the parts list or diagram (PDF) on its own site. The manual is where DELTA Machinery states what the 18-900L needs and how it is set up; read it before you buy, not only after.

From the 18-900L manual and DELTA Machinery's product page (7)

Speeds: 16 (170-3000 RPM)18-900L | 18 in. Laser Drill Press - Delta Machinery
Quill stroke: 6 in.18-900L | 18 in. Laser Drill Press - Delta Machinery
Chuck capacity: 5/8 in.18-900L | 18 in. Laser Drill Press - Delta Machinery
Spindle taper: Morse #218-900L | 18 in. Laser Drill Press - Delta Machinery
Horsepower: 3/4 HP18-900L | 18 in. Laser Drill Press - Delta Machinery
Chuck to table capacity: 22-1/4 in.18-900L | 18 in. Laser Drill Press - Delta Machinery
Table tilt: L/R 0-90°; Forward 0-48°18-900L | 18 in. Laser Drill Press - Delta Machinery

Read on DELTA Machinery's own pages; each row links to where it is written.

Guides that cover drill presses

Compare the 18-900L with

18-900L vs 4214T

The 18-900L beside the WEN Products 4214T, row by row. Both are drill presses, compared on the 5 figures published for both.

Other drill presses

Powermatic PM2820EVS

Powermatic · drill press · swing 20 in. · horsepower 1 HP · spindle travel 6 in.

WEN Products 4214T

WEN Products · drill press · swing 12-inch · spindle travel 3-1/8-inch

18-900L: questions answered from DELTA Machinery's specification

How powerful is the DELTA Machinery 18-900L?

DELTA Machinery rates the 18-900L at 3/4 HP.

Source: 18-900L | 18 in. Laser Drill Press - Delta Machinery

How much does the DELTA Machinery 18-900L weigh?

The DELTA Machinery 18-900L weighs 240 lbs., by DELTA Machinery's figure.

Source: 18-900L | 18 in. Laser Drill Press - Delta Machinery

What warranty does DELTA Machinery give on the 18-900L?

DELTA Machinery lists the warranty on the 18-900L as: 5 Year Warranty.

Source: 18-900L | 18 in. Laser Drill Press - Delta Machinery

Where is the manual for the DELTA Machinery 18-900L?

DELTA Machinery publishes the 18-900L manual on its own site; the link is under "The manual" on this page.

Source: DELTA Machinery 18-900L product page

What does DELTA Machinery say about speeds on the 18-900L?

Per DELTA Machinery's own pages for the 18-900L: 16 (170-3000 RPM).

Source: 18-900L | 18 in. Laser Drill Press - Delta Machinery

What does DELTA Machinery say about quill stroke on the 18-900L?

Per DELTA Machinery's own pages for the 18-900L: 6 in.

Source: 18-900L | 18 in. Laser Drill Press - Delta Machinery

What does DELTA Machinery say about chuck capacity on the 18-900L?

Per DELTA Machinery's own pages for the 18-900L: 5/8 in.

Source: 18-900L | 18 in. Laser Drill Press - Delta Machinery

What does DELTA Machinery say about spindle taper on the 18-900L?

Per DELTA Machinery's own pages for the 18-900L: Morse #2.

Source: 18-900L | 18 in. Laser Drill Press - Delta Machinery

What does DELTA Machinery say about horsepower on the 18-900L?

Per DELTA Machinery's own pages for the 18-900L: 3/4 HP.

Source: 18-900L | 18 in. Laser Drill Press - Delta Machinery

What does DELTA Machinery say about chuck to table capacity on the 18-900L?

Per DELTA Machinery's own pages for the 18-900L: 22-1/4 in.

Source: 18-900L | 18 in. Laser Drill Press - Delta Machinery

Every DELTA Machinery tool on Taikra · All drill presses compared

Sources

18-900L | 18 in. Laser Drill Press - Delta Machinery — DELTA Machinery
DELTA Machinery 18-900L product page — DELTA Machinery