See it at DELTA Machinery: 18-900L
DELTA Machinery's own page for the 18-900L. Not a paid link.
18-900L vs 4214T
DELTA Machinery 18-900L vs WEN Products 4214T. Of the 5 figures both makers publish, 1 differs: spindle travel. 4 are worded too differently to set side by side: table size, speed, weight and warranty. Both are drill presses, compared on the 5 figures published for both.
The makers' figures side by side
| Specification | DELTA Machinery 18-900L | WEN Products 4214T |
|---|---|---|
| Motor | — | 5-amp induction motor |
| Horsepower | 3/4 HP | — |
| Table size | 20 in. x 14 in. | 9-1/2 by 9-1/2-inch |
| Speed | 16 (170-3000 RPM) | 580 to 3200 RPM |
| Swing | — | 12-inch |
| Spindle travel | 6 in. | 3-1/8-inch |
| Dimensions | — | 16.8 by 13.5 by 36.6 inches |
| Weight | 240 lbs. | 85 pounds |
| Warranty | 5 Year Warranty | two-year warranty |
The 18-900L and 4214T pages cite each of these figures row by row, and the sources below list where they were read. 4 cells show a dash: the maker pages we cite do not state that figure.
Where to buy
DELTA Machinery 18-900L
WEN Products 4214T
See it at WEN Products: 4214T
WEN Products' own page for the 4214T. Not a paid link.
Where the 18-900L and 4214T figures differ
- Spindle travel: 18-900L: 6 in. 4214T: 3-1/8-inch.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Table size: 18-900L: 20 in. x 14 in. 4214T: 9-1/2 by 9-1/2-inch.
- Speed: 18-900L: 16 (170-3000 RPM). 4214T: 580 to 3200 RPM.
- Weight: 18-900L: 240 lbs. 4214T: 85 pounds.
- Warranty: 18-900L: 5 Year Warranty. 4214T: two-year warranty.
Figures cited for one of the two: only DELTA Machinery's cited pages give horsepower; only WEN Products' cited pages give motor, swing and dimensions. Ask the other maker before treating the 18-900L and 4214T as equal on those points.
The 18-900L and the 4214T in full
DELTA Machinery 18-900L
DELTA Machinery · drill press · horsepower 3/4 HP · spindle travel 6 in.
WEN Products 4214T
WEN Products · drill press · swing 12-inch · spindle travel 3-1/8-inch
Every tool we list from DELTA Machinery and WEN Products.
Sources
- 18-900L | 18 in. Laser Drill Press - Delta Machinery — DELTA Machinery
- DELTA Machinery 18-900L product page — DELTA Machinery
- WEN 4214T 5-Amp 12-Inch Variable Speed Cast Iron Benchtop Drill Press — WEN Products — WEN Products