See it at FLEX: FX4221-Z
FLEX's own page for the FX4221-Z. Not a paid link.
The FLEX FX4221-Z is FLEX's 24V Compact (Trim) Router Tool Only, listed with a collet of 1/4 in. Each figure below comes from FLEX's own pages, with a link to where it appears.
See it comparedWhat a router is for. Bosch Power Tools writes: "Fixed-base routers are ideal for edge routing and precise cuts, while plunge routers allow the bit to start above the material and plunge down into the cut, providing more versatility for tasks like mortising or inlay work."
As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.
FLEX's own page for the FX4221-Z. Not a paid link.
As published by FLEX, read on 2026-09-28. Makers revise their tools; check FLEX's current specification and manual before you buy.
Each row is our short reading of a passage on FLEX's pages, linked to where it appears.
The FX4221-Z beside the Festool USA OF 1010 REBQ-Plus (578017), row by row. Both are routers, compared on the 7 figures published for both.
Bosch · router · current (amps) 12 · collet 1/4", 3/8", 1/2", 8 mm
Bosch · router · horsepower 1.25 · current (amps) 7 · collet 1/4"
Bosch · router · collet 1/4 In.
Bosch · router · collet 1/4"
Bosch · router · collet 1/4"
Bosch · router · horsepower 2.3 · current (amps) 15 · collet 1/4", 3/8", 1/2", 8 mm
DEWALT · router · current (amps) 12
Makita U.S.A. · router · horsepower 1-1/4 HP · current (amps) AMPS: 6.5 · collet 1/4"
Makita U.S.A. · router · collet 1/4"
FLEX lists the FX4221-Z at 24V. FLEX's manual gives the supply the FX4221-Z needs.
The FLEX FX4221-Z weighs 3.5 lbs (w/ fixed base, no battery), by FLEX's figure.
FLEX lists included for the FX4221-Z as: FLEX 24V Compact Router [FX4221-Z], Spanner (2), Edge Guide (1), Dust Shroud (1), Big Subbase (1), Centering Cone (1).
Per FLEX's own pages for the FX4221-Z: 1/4 in.
Per FLEX's own pages for the FX4221-Z: 16,000 - 31,000 RPM; 6 settings.
Per FLEX's own pages for the FX4221-Z: Fixed depth range 1.97 in; adjustment 1/64 in.
Per FLEX's own pages for the FX4221-Z: Yes.
Per FLEX's own pages for the FX4221-Z: 3.5 lbs (w/ fixed base, no battery).