See it at RIKON Power Tools: 25-130H
RIKON Power Tools' own page for the 25-130H. Not a paid link.
25-130H vs 6552T
RIKON Power Tools 25-130H vs WEN Products 6552T. Of the 5 figures both makers publish, 2 differ: speed and weight. One is worded too differently to set side by side: dust port. Both are planers with a similar cutting width: cutting width 13" on the 25-130H, 13 inches wide on the 6552T, in their makers' figures.
The makers' figures side by side
| Specification | RIKON Power Tools 25-130H | WEN Products 6552T |
|---|---|---|
| Motor | 120V, 60Hz, 15A, PH1, AC | — |
| Current (amps) | — | 15A |
| Depth of cut | — | 3/32 in. (for workpieces under 6 in. wide); 1/32 in. (for workpieces over 6 in. wide) |
| Cutting width | 13" | 13 inches wide |
| Cutting depth per pass | 1/8" | — |
| Maximum stock thickness | 6" | 6 inches thick |
| Minimum stock thickness | 3/16" | — |
| Feed rate | — | 26 feet per minute |
| Knives or inserts | — | Three-blade |
| Table size | 9-1/4" x 13-1/16" | — |
| Speed | 10,000 RPM | 8,500 RPM (cutterhead) |
| Noise level | 100 dB | — |
| Dust port | 4" or 2-1/2" Diameter | 2 in., 2-1/2 in., and 4 in. |
| Dimensions | 26-1/4" x 34-1/4" x 17-5/16" | — |
| Weight | 73 lbs | 66 lbs. |
| Warranty | — | two-year warranty |
Each figure is the maker's own, as cited row by row on the 25-130H and 6552T pages and listed in the sources below. A dash (11 here) means the figure is not on the maker pages we cite.
Where to buy
RIKON Power Tools 25-130H
WEN Products 6552T
See it at WEN Products: 6552T
WEN Products' own page for the 6552T. Not a paid link.
Where the 25-130H and 6552T figures differ
- Speed: 25-130H: 10,000 RPM. 6552T: 8,500 RPM (cutterhead).
- Weight: 25-130H: 73 lbs. 6552T: 66 lbs.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Dust port: 25-130H: 4" or 2-1/2" Diameter. 6552T: 2 in., 2-1/2 in., and 4 in.
Where the table has one figure and a dash, only RIKON Power Tools' cited pages give motor, cutting depth per pass, minimum stock thickness, table size, noise level and dimensions; only WEN Products' cited pages give current, depth of cut, feed rate, knives or inserts and warranty. Those rows are open questions for the other maker, not ties between the 25-130H and 6552T.
The 25-130H and the 6552T in full
RIKON Power Tools 25-130H
RIKON Power Tools · planer · cutting width 13" · maximum stock thickness 6"
WEN Products 6552T
WEN Products · planer · cutting width 13 inches wide · maximum stock thickness 6 inches thick · current (amps) 15A
Every tool we list from RIKON Power Tools and WEN Products.
Sources
- 25-130H 13" Thickness Planer with Helical-Style Cutterhead Operator's Manual (25-130HM3) — RIKON Power Tools
- WEN 6552T 13-Inch 3-Blade Benchtop Thickness Planer - WEN Products — WEN Products
- WEN Products 6552T owner's manual — WEN Products