See it at RIKON Power Tools: 20-600H
RIKON Power Tools' own page for the 20-600H. Not a paid link.
20-600H vs 6559
RIKON Power Tools 20-600H vs WEN Products 6559. Of the 5 figures both makers publish, none differs outright. 3 are worded too differently to set side by side: cutting depth per pass, table size and fence. Both are jointers with the same cutting width: cutting width 6" on the 20-600H, 6-Inch on the 6559, in their makers' figures.
The makers' figures side by side
| Specification | RIKON Power Tools 20-600H | WEN Products 6559 |
|---|---|---|
| Motor | 120V, 60Hz, 10A, PH1, AC | — |
| Current (amps) | — | 10-amp |
| Cutting width | 6" | 6-Inch |
| Cutting depth per pass | 1/8" | 0 to 1/8 of an inch |
| Cutterhead | — | two-blade 6-1/8 inch cutterhead |
| Knives or inserts | 12 inserts | — |
| Table size | 30" x 6-1/8" | 6-1/4 x 28-1/2 inch |
| Fence | 19-3/4" x 4-3/8" | 20-3/4 x 4-1/2 inch fence bevels up to 45 degrees in either direction |
| Speed | 12,000 RPM | — |
| Noise level | 100 dB | — |
| Dust port | 2-1/2" | adjustable 2-1/2-inch dust chute |
| Included | — | a push stick, a push block, an adjustable 2-1/2-inch dust chute, a dust filter bag |
| Dimensions | 30" x 17-1/2" x 13" | — |
| Weight | 36 lbs | — |
| Warranty | — | two-year warranty |
Every cell is the maker's own wording, cited on the 20-600H and 6559 pages; the sources are listed at the end. Where a cell has a dash, 10 of them in this table, the maker pages we cite do not give the figure.
Where to buy
RIKON Power Tools 20-600H
WEN Products 6559
See it at WEN Products: 6559
WEN Products' own page for the 6559. Not a paid link.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Cutting depth per pass: 20-600H: 1/8". 6559: 0 to 1/8 of an inch.
- Table size: 20-600H: 30" x 6-1/8". 6559: 6-1/4 x 28-1/2 inch.
- Fence: 20-600H: 19-3/4" x 4-3/8". 6559: 20-3/4 x 4-1/2 inch fence bevels up to 45 degrees in either direction.
Cited for one of the pair: only RIKON Power Tools' cited pages give motor, knives or inserts, speed, noise level, dimensions and weight; only WEN Products' cited pages give current, cutterhead, included and warranty. The other maker may publish the figure elsewhere; ask it rather than assume the 20-600H and 6559 match there.
The 20-600H and the 6559 in full
RIKON Power Tools 20-600H
RIKON Power Tools · jointer · cutting width 6"
WEN Products 6559
WEN Products · jointer · cutting width 6-Inch · cutterhead two-blade 6-1/8 inch cutterhead
Every tool we list from RIKON Power Tools and WEN Products.