See it at RIKON Power Tools: 20-600H
RIKON Power Tools' own page for the 20-600H. Not a paid link.
20-600H vs 20-800H
RIKON Power Tools 20-600H vs RIKON Power Tools 20-800H. Of the 11 figures both makers publish, 5 differ: cutting width, knives or inserts, table size and dimensions and 1 more. One is worded too differently to set side by side: dust port. Both are jointers, compared on the 11 figures published for both.
The makers' figures side by side
| Specification | RIKON Power Tools 20-600H | RIKON Power Tools 20-800H |
|---|---|---|
| Motor | 120V, 60Hz, 10A, PH1, AC | 120V, 60Hz, 10A, PH1, AC |
| Cutting width | 6" | 8" (203.20mm) |
| Cutting depth per pass | 1/8" | 1/8" (3mm) |
| Knives or inserts | 12 inserts | 16 inserts |
| Table size | 30" x 6-1/8" | 30-1/2" x 8-3/16" (774.70 x 207.96mm) |
| Fence | 19-3/4" x 4-3/8" | 19-3/4" x 4-3/8" (501.65 x 111.13mm) |
| Speed | 12,000 RPM | 12,000 RPM |
| Noise level | 100 dB | 100 dB |
| Dust port | 2-1/2" | 4" & 2-1/2" (101.60 x 63.50mm) |
| Dimensions | 30" x 17-1/2" x 13" | 51-1/2" x 18-3/4" x 13" (1,308.10 x 476.25 x 330.20mm) |
| Weight | 36 lbs | 49 lbs (22.23kg) |
Every cell is the maker's own wording, cited on the 20-600H and 20-800H pages; the sources are listed at the end. Both makers publish every figure in the table.
Where to buy
RIKON Power Tools 20-600H
RIKON Power Tools 20-800H
See it at RIKON Power Tools: 20-800H
RIKON Power Tools' own document for the 20-800H (PDF). Not a paid link.
Where the 20-600H and 20-800H figures differ
- Cutting width: 20-600H: 6". 20-800H: 8" (203.20mm).
- Knives or inserts: 20-600H: 12 inserts. 20-800H: 16 inserts.
- Table size: 20-600H: 30" x 6-1/8". 20-800H: 30-1/2" x 8-3/16" (774.70 x 207.96mm).
- Dimensions: 20-600H: 30" x 17-1/2" x 13". 20-800H: 51-1/2" x 18-3/4" x 13" (1,308.10 x 476.25 x 330.20mm).
- Weight: 20-600H: 36 lbs. 20-800H: 49 lbs (22.23kg).
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Dust port: 20-600H: 2-1/2". 20-800H: 4" & 2-1/2" (101.60 x 63.50mm).
The 20-600H and the 20-800H in full
RIKON Power Tools 20-600H
RIKON Power Tools · jointer · cutting width 6"
RIKON Power Tools 20-800H
RIKON Power Tools · jointer · cutting width 8" (203.20mm)
Every RIKON Power Tools tool we list: RIKON Power Tools.