See it at Powermatic: 54HH
Powermatic's own page for the 54HH. Not a paid link.
54HH vs 20-600H
Powermatic 54HH vs RIKON Power Tools 20-600H. Of the 8 figures both makers publish, 2 differ: speed and weight. 6 are worded too differently to set side by side: motor, cutting width, knives or inserts and table size and 2 more. Both are jointers with the same cutting width: cutting width 1/2" x 6" on the 54HH, 6" on the 20-600H, in their makers' figures.
The makers' figures side by side
| Specification | Powermatic 54HH | RIKON Power Tools 20-600H |
|---|---|---|
| Motor | TEFC, 1 HP, 1 PH, 115/230V*, 60Hz | 120V, 60Hz, 10A, PH1, AC |
| Cutting width | 1/2" x 6" | 6" |
| Cutting depth per pass | — | 1/8" |
| Cutterhead | helical | — |
| Knives or inserts | 40 four-sided inserts | 12 inserts |
| Table size | 7-1/4 x 66 | 30" x 6-1/8" |
| Table height | 31-1/2 in. | — |
| Fence | 4-3/4 x 38 | 19-3/4" x 4-3/8" |
| Speed | 6000 RPM | 12,000 RPM |
| Noise level | — | 100 dB |
| Dust port | — | 2-1/2" |
| Dimensions | 66 x 24 x 37-1/2 | 30" x 17-1/2" x 13" |
| Weight | 254 lb | 36 lbs |
The 54HH and 20-600H pages cite each of these figures row by row, and the sources below list where they were read. The 5 dashes mark a figure the maker pages we cite do not give, not a zero.
Where to buy
Powermatic 54HH
As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.
Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.
RIKON Power Tools 20-600H
See it at RIKON Power Tools: 20-600H
RIKON Power Tools' own page for the 20-600H. Not a paid link.
Where the 54HH and 20-600H figures differ
- Speed: 54HH: 6000 RPM. 20-600H: 12,000 RPM.
- Weight: 54HH: 254 lb. 20-600H: 36 lbs.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Motor: 54HH: TEFC, 1 HP, 1 PH, 115/230V*, 60Hz. 20-600H: 120V, 60Hz, 10A, PH1, AC.
- Cutting width: 54HH: 1/2" x 6". 20-600H: 6".
- Knives or inserts: 54HH: 40 four-sided inserts. 20-600H: 12 inserts.
- Table size: 54HH: 7-1/4 x 66. 20-600H: 30" x 6-1/8".
- Fence: 54HH: 4-3/4 x 38. 20-600H: 19-3/4" x 4-3/8".
- Dimensions: 54HH: 66 x 24 x 37-1/2. 20-600H: 30" x 17-1/2" x 13".
One-sided rows: only Powermatic's cited pages give cutterhead and table height; only RIKON Power Tools' cited pages give cutting depth per pass, noise level and dust port. A missing figure is not a zero, so the 54HH and 20-600H cannot be compared on those rows from these pages.
The 54HH and the 20-600H in full
Powermatic 54HH
Powermatic · jointer · cutting width 1/2" x 6" · cutterhead helical
RIKON Power Tools 20-600H
RIKON Power Tools · jointer · cutting width 6"
Every tool we list from Powermatic and RIKON Power Tools.