See it at Powermatic: 15HH
Powermatic's own page for the 15HH. Not a paid link.
15HH vs 209HH-1
Powermatic 15HH vs Powermatic 209HH-1. Of the 11 figures both makers publish, 7 differ: cutting width, maximum stock thickness, minimum stock thickness and knives or inserts and 3 more. 3 are worded too differently to set side by side: motor, feed rate and dimensions. Both are planers, compared on the 11 figures published for both.
The makers' figures side by side
| Specification | Powermatic 15HH | Powermatic 209HH-1 |
|---|---|---|
| Motor | TEFC,3HP,1Ph,230V,60Hz,15A | TEFC, 5HP, 1Ph, 28A, 230V |
| Cutting width | 14-7/8 in. | 20 in. |
| Cutting depth per pass | 1/8 in. | — |
| Maximum stock thickness | 6 in. | 8 in. |
| Minimum stock thickness | 3/16 in. | 1/8 in. |
| Feed rate | 16 and 20 FPM | 24 and 31 FPM |
| Knives or inserts | 74 four-sided inserts | 100 four-sided inserts |
| Table size | — | 25-3/4 x 20 |
| Speed | 4,500 RPM | 5,000 RPM |
| Noise level | 80 to 84 dB | 80 to 84 dB |
| Dust port | 4 in. | 5 in. |
| Dimensions | 48 x 28 x 43-1/2 | 26 x 36-5/8 x 41-3/8 |
| Weight | 502 lb | 801 lb |
Each figure is the maker's own, as cited row by row on the 15HH and 209HH-1 pages and listed in the sources below. Where a cell has a dash, 2 of them in this table, the maker pages we cite do not give the figure.
Where to buy
Powermatic 15HH
Powermatic 209HH-1
See it at Powermatic: 209HH-1
Powermatic's own page for the 209HH-1. Not a paid link.
Where the 15HH and 209HH-1 figures differ
- Cutting width: 15HH: 14-7/8 in. 209HH-1: 20 in.
- Maximum stock thickness: 15HH: 6 in. 209HH-1: 8 in.
- Minimum stock thickness: 15HH: 3/16 in. 209HH-1: 1/8 in.
- Knives or inserts: 15HH: 74 four-sided inserts. 209HH-1: 100 four-sided inserts.
- Speed: 15HH: 4,500 RPM. 209HH-1: 5,000 RPM.
- Dust port: 15HH: 4 in. 209HH-1: 5 in.
- Weight: 15HH: 502 lb. 209HH-1: 801 lb.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Motor: 15HH: TEFC,3HP,1Ph,230V,60Hz,15A. 209HH-1: TEFC, 5HP, 1Ph, 28A, 230V.
- Feed rate: 15HH: 16 and 20 FPM. 209HH-1: 24 and 31 FPM.
- Dimensions: 15HH: 48 x 28 x 43-1/2. 209HH-1: 26 x 36-5/8 x 41-3/8.
Cited for one of the pair: only Powermatic's cited pages give cutting depth per pass; only Powermatic's cited pages give table size. The other maker may publish the figure elsewhere; ask it rather than assume the 15HH and 209HH-1 match there.
The 15HH and the 209HH-1 in full
Powermatic 15HH
Powermatic · planer · cutting width 14-7/8 in. · maximum stock thickness 6 in.
Powermatic 209HH-1
Powermatic · planer · cutting width 20 in. · maximum stock thickness 8 in.
Every Powermatic tool we list: Powermatic.