See it at DEWALT: DWS780
DEWALT's own page for the DWS780. Not a paid link.
DWS780 vs FX7141A-Z
DEWALT DWS780 vs FLEX FX7141A-Z. Of the 5 figures both makers publish, none differs outright. 4 are worded too differently to set side by side: arbor, miter capacity, crosscut capacity and included. Both are miter saws with the same blade diameter: blade diameter 12 in. on the DWS780, 12 in on the FX7141A-Z, in their makers' figures.
The makers' figures side by side
| Specification | DEWALT DWS780 | FLEX FX7141A-Z |
|---|---|---|
| Motor | 120 volt motor; 1600 watts in 15 amp motor; 3800 RPM; automatic electric brake | — |
| Voltage | — | 24V |
| Blade diameter | 12 in. | 12 in |
| Arbor | 12" (305 mm) saw blades with either 1" (25.4 mm) or 5/8" (15.88 mm) arbor holes; speed rating at least 4800 RPM | 1 in |
| Bevel capacity | — | L:0-48°/R:0-48° |
| Miter capacity | 60° to the right and 50° to the left | L:0-52°/R:0-60° |
| Crosscut capacity | 2x14 dimensional lumber at 90° and 2x10 at 45° | 3.6 in x 14 in |
| Speed | — | 4,000 RPM |
| Included | (1) 12-Inch Carbide Blade | (1) 12'' Miter Saw [FX7141A], (1) Dust Bag, (1) Dust Elbow, (1) Material Clamp, (1) Blade Change Wrench |
| Weight | — | 48.1 lbs |
The DWS780 and FX7141A-Z pages cite each of these figures row by row, and the sources below list where they were read. The 5 dashes mark a figure the maker pages we cite do not give, not a zero.
Where to buy
DEWALT DWS780
FLEX FX7141A-Z
As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.
Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.
See it at FLEX: FX7141A-Z
FLEX's own page for the FX7141A-Z. Not a paid link.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Arbor: DWS780: 12" (305 mm) saw blades with either 1" (25.4 mm) or 5/8" (15.88 mm) arbor holes; speed rating at least 4800 RPM. FX7141A-Z: 1 in.
- Miter capacity: DWS780: 60° to the right and 50° to the left. FX7141A-Z: L:0-52°/R:0-60°.
- Crosscut capacity: DWS780: 2x14 dimensional lumber at 90° and 2x10 at 45°. FX7141A-Z: 3.6 in x 14 in.
- Included: DWS780: (1) 12-Inch Carbide Blade. FX7141A-Z: (1) 12'' Miter Saw [FX7141A], (1) Dust Bag, (1) Dust Elbow, (1) Material Clamp, (1) Blade Change Wrench.
One-sided rows: only DEWALT's cited pages give motor; only FLEX's cited pages give voltage, bevel capacity, speed and weight. A missing figure is not a zero, so the DWS780 and FX7141A-Z cannot be compared on those rows from these pages.
The DWS780 and the FX7141A-Z in full
DEWALT DWS780
DEWALT · miter saw · blade diameter 12 in.
FLEX FX7141A-Z
FLEX · miter saw · blade diameter 12 in · crosscut capacity 3.6 in x 14 in