See it at DEWALT: DWS779
DEWALT's own page for the DWS779. Not a paid link.
DWS779 vs FX7141A-Z
DEWALT DWS779 vs FLEX FX7141A-Z. Of the 6 figures both makers publish, 1 differs: voltage. 4 are worded too differently to set side by side: arbor, bevel capacity, crosscut capacity and included. Both are miter saws with the same blade diameter: blade diameter 12 in. on the DWS779, 12 in on the FX7141A-Z, in their makers' figures.
The makers' figures side by side
| Specification | DEWALT DWS779 | FLEX FX7141A-Z |
|---|---|---|
| Voltage | 120V | 24V |
| Blade diameter | 12 in. | 12 in |
| Arbor | 12" (305 mm) saw blades with either 1" (25.4 mm) or 5/8" (15.88 mm) arbor holes; speed rating at least 4800 RPM | 1 in |
| Bevel capacity | 0° - 48° left and right | L:0-48°/R:0-48° |
| Miter capacity | — | L:0-52°/R:0-60° |
| Crosscut capacity | 2-in X 14-in Dimensional lumber cross cut capacity at 90° and 2-in X 10-in at 45° | 3.6 in x 14 in |
| Speed | — | 4,000 RPM |
| Included | (1) Carbide Blade; (1) Blade Wrench; (1) Dust Bag; (1) Vertical Material Clamp; (1) DWS779 Miter Saw | (1) 12'' Miter Saw [FX7141A], (1) Dust Bag, (1) Dust Elbow, (1) Material Clamp, (1) Blade Change Wrench |
| Weight | — | 48.1 lbs |
Each figure is the maker's own, as cited row by row on the DWS779 and FX7141A-Z pages and listed in the sources below. 3 cells show a dash: the maker pages we cite do not state that figure.
Where to buy
DEWALT DWS779
FLEX FX7141A-Z
As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.
Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.
See it at FLEX: FX7141A-Z
FLEX's own page for the FX7141A-Z. Not a paid link.
Where the DWS779 and FX7141A-Z figures differ
- Voltage: DWS779: 120V. FX7141A-Z: 24V.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Arbor: DWS779: 12" (305 mm) saw blades with either 1" (25.4 mm) or 5/8" (15.88 mm) arbor holes; speed rating at least 4800 RPM. FX7141A-Z: 1 in.
- Bevel capacity: DWS779: 0° - 48° left and right. FX7141A-Z: L:0-48°/R:0-48°.
- Crosscut capacity: DWS779: 2-in X 14-in Dimensional lumber cross cut capacity at 90° and 2-in X 10-in at 45°. FX7141A-Z: 3.6 in x 14 in.
- Included: DWS779: (1) Carbide Blade; (1) Blade Wrench; (1) Dust Bag; (1) Vertical Material Clamp; (1) DWS779 Miter Saw. FX7141A-Z: (1) 12'' Miter Saw [FX7141A], (1) Dust Bag, (1) Dust Elbow, (1) Material Clamp, (1) Blade Change Wrench.
Figures cited for one of the two: only FLEX's cited pages give miter capacity, speed and weight. Ask the other maker before treating the DWS779 and FX7141A-Z as equal on those points.
The DWS779 and the FX7141A-Z in full
DEWALT DWS779
DEWALT · miter saw · blade diameter 12 in.
FLEX FX7141A-Z
FLEX · miter saw · blade diameter 12 in · crosscut capacity 3.6 in x 14 in