See it at DEWALT: DW735
DEWALT's own page for the DW735. Not a paid link.
DW735 vs 6550T
DEWALT DW735 vs WEN Products 6550T. Of the 3 figures both makers publish, 1 differs: cutting width. One is worded too differently to set side by side: knives or inserts. Both are planers with a similar cutting width: cutting width 13 in. on the DW735, 12.5 inches on the 6550T, in their makers' figures.
The makers' figures side by side
| Specification | DEWALT DW735 | WEN Products 6550T |
|---|---|---|
| Current (amps) | 15 | 15A |
| Voltage | 120V | — |
| Depth of cut | — | 0 to 3/32 of an inch |
| Cutting width | 13 in. | 12.5 inches |
| Maximum stock thickness | — | 6 inches |
| Feed rate | — | 26 feet per minute |
| Knives or inserts | Three knife | two high carbon steel double-edged blades (SK5) |
| Speed | 10,000 RPM | — |
| Dust port | 4" (100 mm) dust collector hose | — |
| Included | (1) 13-in (330mm) Corded Electric Three Knife, Two Speed Thickness Planer; (1) Dust Hose Adapter; (1) Thickness Planer Crank Handle; (1) Blade Change T-Wrench | — |
| Warranty | 3 Year Limited Warranty | — |
| Safety listing | UL listed | — |
Every cell is the maker's own wording, cited on the DW735 and 6550T pages; the sources are listed at the end. Where a cell has a dash, 9 of them in this table, the maker pages we cite do not give the figure.
Where to buy
DEWALT DW735
As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.
Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.
WEN Products 6550T
See it at WEN Products: 6550T
WEN Products' own page for the 6550T. Not a paid link.
Where the DW735 and 6550T figures differ
- Cutting width: DW735: 13 in. 6550T: 12.5 inches.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Knives or inserts: DW735: Three knife. 6550T: two high carbon steel double-edged blades (SK5).
Cited for one of the pair: only DEWALT's cited pages give voltage, speed, dust port, included, warranty and safety listing; only WEN Products' cited pages give depth of cut, maximum stock thickness and feed rate. The other maker may publish the figure elsewhere; ask it rather than assume the DW735 and 6550T match there.
The DW735 and the 6550T in full
DEWALT DW735
DEWALT · planer · cutting width 13 in. · current (amps) 15
WEN Products 6550T
WEN Products · planer · cutting width 12.5 inches · maximum stock thickness 6 inches · current (amps) 15A
Every tool we list from DEWALT and WEN Products.